Cart 
Order Tracking
13*3mm Plastic Hand Hold ID Card PVC Card Flat Slot Hole Punch
Item Code: CS-A-008
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is convenient and applicable easily. The hole it punches by hand is of standard without coarse edges. It is suitable for suspension nip.
Ships to United States
13*3mm Metal Hand Held Flat Slot Hole Punch for ID Card and PVC Card
Item Code: CS-A-101
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is elegant and convenient and applicable easily. The hole it punches is of standard without coarse edges. It's white color and convenient to punch by hand.
Ships to United States
13.1ft Wing Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SWING-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike - for use on grass or earth. • Flagpole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1ft Feather Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CF-3
Easy 4 Steps to Custom Made Your flag banner stand: Note: Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Feather banners/flags are an excellent way to display advertising for your business at trade shows, and events. They can be easily assembled in a few minutes. Our feather banners are made up of 2 piece aluminum poles and 2 piece carbon poles that inside into the hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. The Cross Base could be an ideal fit for you in the event you are placing your Feather Flag Banner Stand a flat surface. The Cross Base also enables your flag to spin around the base when there is a breeze. This portable flag stand are not designed to be used in winds exceeding 20 MPH. With double sided printing we print on two pieces polyester fabric and stitch them together.This offers a readable image from each side of the flag unlike single sided prints. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a feather flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
340mm(13.4") Double Sides Hot Photo Laminator
Item Code: FMJ-360-RD-I
FMJ-RD Series DOUBLE SIDES HOT Laminator Both cold and hot laminators. It can conduct mounting and hot lamination with a single side or double side lamination, available in 360mm and 650mm. Product Highlights: . Maximum working film width, form 13” up to 24”. . Electric model
Ships to United States
13.1 ft Feather Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SF-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: This feather banner is a flag that has a ground spike base for posting in the front lawn of a property. The flag that flutters in the wind is not only easier for people to see than a traditional sign, but also the carefully engineered design is inexpensive by comparison. A pole consisting of four segments, 2 aluminum and 2 fiberglass, comes with each feather banner. An intuitive design and light weight means only one person is needed to set up this display. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a full color feather flag, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike – for its use on grass or earth. • Light weighted flagpole. Simple handling, no tools required. Includes: Spike base, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Wing Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CWING-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Pole with Spike Base Flag Banner Stand
Item Code: SIC-FB-S-2
Features: . Carbon composite fiber poles, superb flexibility to prevent breaking. . Ground spike - for use on grass or earth. . Flagpole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Carry bag. Description: The poles made up of 2 piece aluminum pole and 2 piece carbon pole that can be quickly removed from `the` base to bring the unit it at the close of each business day. The ground spike is designed for use outdoors, as it can be hammered into `the` ground. This base option is designed for dirt or grassy areas.
Ships to United States
13.1ft Wing Banner with Spike Base (Double Sided Printing)
Item Code: SIC-FB-SWINGD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike - for use on grass or earth. • Flagpole is lightweight .Simple handling, no tools required. Installation: It is easy to install banner stand. Firstly, stick the spike it into ground and connect the four poles, then fix the banner on the pole and insert the rope through the hole of banner bottom then use the key snap trigger to lock at the bottom of pole, and the last step, put the pole into the spike. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Pole with Cross Base Flag Banner Stand
Item Code: SIC-FB-C-2
Features: . Carbon composite fiber poles, superb flexibility to prevent breaking. . Rotating Cross Base - For use on concrete or hard floors. . Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Poles, Carry bag. Description: The poles made up of 2 piece aluminum pole and 2 piece carbon pole that can be quickly removed from `the` base to bring the unit it at the close of each business day. The strong cross base can be used on concrete or hard floors. It is can be easy placing your display on the ground indoors or outdoors.
Ships to United States
13.1 ft Wing Banner with Cross Water Bag Base (Single Sided Printing)
Item Code: SIC-FB-CWW-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • File should be created in CMYK color mode. Converting from other modes may distort colors, shapes or images. • File should be 100-120dip at full output size. • Convert all fonts to outlines and/or include all fonts used. If unsure send all fonts used. • Logos and line based objects should remain in vector format whenever possible. Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • The Water Base is designed to fit over the Rotating Base above, this gives greater stability outdoors in windy weather. • Flagpole is lightweight .Simple handling, no tools required. Installation: It is easy to install banner stand. Firstly, stick the spike it into ground and connect the four poles, then fix the banner on the pole and insert the rope through the hole of banner bottom then use the key snap trigger to lock at the bottom of pole, and the last step, put the pole into the spike. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly, connect the four poles and install the banner on the pole. Thirdly, insert the rope pass the hole at the banner bottom, and use the key snap trigger to fix at the bottom of pole. Lastly, insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Feather Banner with Cross Water Bag Base (Single Sided Printing)
Item Code: SIC-FB-CWF-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: These event flags include a cross base for insertion of the pole. This cross base folds small for easy transport, and can be used to display your custom promotional banners in either outdoor or indoor locations. The kit also includes a cross base and water bag for placing at outdoor venues. The feather banners, event flags feature digitally printed CMYK graphics. These custom banners are great for more complex designs featuring photographs or gradients. Custom banners, like these event flags, can be found at trade shows, convention centers, and even outdoor venues. This promotional product is used to inform the public and direct attention. This custom feather flag uses a water bag to weigh down the base to provide more stability. This lightweight outdoor banner draws attention to any business or event easily, as it utilizes personally designed graphics to convey your message. Graphic file requirement: • File should be created in CMYK color mode. Converting from other modes may distort colors, shapes or images. • File should be 100-120dip at full output size. • Convert all fonts to outlines and/or include all fonts used. If unsure send all fonts used. • Logos and line based objects should remain in vector format whenever possible. • Includes a full color feather flag, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • The Water Base is designed to fit over the Rotating Base above, this gives greater stability outdoors in windy weather. • Light weighted flagpole. Simple handling, no tools required. Includes: Cross base, Water bag, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly, connect the four poles and install the banner on the pole. Thirdly, insert the rope pass the hole at the banner bottom, and use the key snap trigger to fix at the bottom of pole. Lastly, insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Pole with Cross Base and Water Bag Flag Banner Stand
Item Code: SIC-FB-CW-2
Features: . Carbon composite fiber poles, superb flexibility to prevent breaking. . The Water Base is designed to fit over the Rotating Base above, this gives greater stability outdoors in windy weather. . Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Water bag, Poles, Carry bag. Description: The poles made up of 2 piece aluminum pole and 2 piece carbon pole that can be quickly removed from `the` base to bring the unit it at the close of each business day. The water bag can be placed over the cross base to help stabilize this unit during light winds. It is supplied that fits over the base to keep it stable.
Ships to United States
13.1 ft Feather Banner with Cross Base (Double Sided Printing)
Item Code: SIC-FB-CFD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Feather banners/flags are an excellent way to display advertising for your business at trade shows, and events. They can be easily assembled in a few minutes. Our feather banners are made up of 2 piece aluminum poles and 2 piece carbon poles that inside into the hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. The Cross Base could be an ideal fit for you in the event you are placing your Feather Flag Banner Stand a flat surface. The Cross Base also enables your flag to spin around the base when there is a breeze. This portable flag stand are not designed to be used in winds exceeding 20 MPH. With double sided printing we print on two pieces polyester fabric and stitch them together.This offers a readable image from each side of the flag unlike single sided prints. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a feather flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Wing Banner with Cross Base (Double Sided Printing)
Item Code: SIC-FB-CWINGD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Feather Banner with Spike Base (Double Sided Printing)
Item Code: SIC-FB-SFD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: This feather banner is a flag that has a ground spike base for posting in the front lawn of a property. The flag that flutters in the wind is not only easier for people to see than a traditional sign, but also the carefully engineered design is inexpensive by comparison. A pole consisting of four segments, 2 aluminum and 2 fiberglass, comes with each feather banner. An intuitive design and light weight means only one person is needed to set up this display. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a feather flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike - for use on grass or earth. • Flagpole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
36" (0.914m) ECO Matte PP Film
Item Code: BS-150QM-36R-NS
. The surface is matte, water proof, and cheaper than photo paper. . The thickness is 5.3oz (150g) per square meter. . Length: 98.4' (30m), but can be made as customer's requirements. . Can be cut into `other` sizes for client requires. . Package: 2 rolls or 4 rolls per carton. Suitable inkjet printers: Mutoh, Roland, HP, Epson, Mimaki, etc. Suitable ink: ECO-solvent ink. Samples:
Ships to United States
60" (1.52m) ECO Matte PP Film
Item Code: BS-180QM-60R-NS
. The surface is matte, water proof. . Cheaper than photo paper. . The thickness is 5.3oz (150g) per square meter. . Length: 98.4' (30m), but can be made as customer's requirements. . Compatible to both solvent ink and pigment ink . Can be cut into `other` sizes for client requires. . Package: 2 rolls or 4 rolls per carton. Suitable inkjet printers: Mutoh, Roland, HP, Epson, Mimaki, etc. Suitable ink: ECO-solvent ink.
Ships to United States
13.1 ft Feather Banner with Cross Water Bag Base(Double Sided Printing)
Item Code: SIC-FB-CWFD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: These event flags include a cross base for insertion of the pole. This cross base folds small for easy transport, and can be used to display your custom promotional banners in either outdoor or indoor locations. The kit also includes a cross base and water bag for placing at outdoor venues. The feather banners, event flags feature digitally printed CMYK graphics. These custom banners are great for more complex designs featuring photographs or gradients. Custom banners, like these event flags, can be found at trade shows, convention centers, and even outdoor venues. This promotional product is used to inform the public and direct attention. This custom feather flag uses a water bag to weigh down the base to provide more stability. This lightweight outdoor banner draws attention to any business or event easily, as it utilizes personally designed graphics to convey your message. Graphic file requirement: • File should be created in CMYK color mode. Converting from other modes may distort colors, shapes or images. • File should be 100-120dip at full output size. • Convert all fonts to outlines and/or include all fonts used. If unsure send all fonts used. • Logos and line based objects should remain in vector format whenever possible. Product features: • Includes a full color feather flag, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • The Water Base is designed to fit over the Rotating Base above, this gives greater stability outdoors in windy weather. • Light weighted flagpole. Simple handling, no tools required. Includes: Cross base, Water bag, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly, connect the four poles and install the banner on the pole. Thirdly, insert the rope pass the hole at the banner bottom, and use the key snap trigger to fix at the bottom of pole. Lastly, insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Wing Banner with Cross Water Bag Base (Double Sided Printing)
Item Code: SIC-FB-CWWD-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH.Graphic file requirement: • File should be created in CMYK color mode. Converting from other modes may distort colors, shapes or images. • File should be 100-120dip at full output size. • Convert all fonts to outlines and/or include all fonts used. If unsure send all fonts used. • Logos and line based objects should remain in vector format whenever possible. Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • The Water Base is designed to fit over the Rotating Base above, this gives greater stability outdoors in windy weather. • Flagpole is lightweight .Simple handling, no tools required. Installation: It is easy to install banner stand. Firstly, stick the spike it into ground and connect the four poles, then fix the banner on the pole and insert the rope through the hole of banner bottom then use the key snap trigger to lock at the bottom of pole, and the last step, put the pole into the spike. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly, connect the four poles and install the banner on the pole. Thirdly, insert the rope pass the hole at the banner bottom, and use the key snap trigger to fix at the bottom of pole. Lastly, insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
42" (1.07m) Matte PP Film S/A (120)
Item Code: BS-120SL-42R-NS
. The back paper is 120um PP, glossy, water proof coating, keeping the vivid color for a longer time. . The material is hard to be torn. The printing color is natural and vivid, fast to dry. . Widely used for advertising sign exhibitions, indoor advertisments, such as posters, roll up banner, X
Ships to United States
60" (1.52m) Glossy W/P PP Film (180)
Item Code: BS-180GN-60R-NS
. The back paper is 150um PP, glossy, water proof coating, keeping the vivid color for a longer time. . The material is hard to be torn. The printing color is natural and vivid, fast to dry. . Widely used for advertising sign exhibitions, indoor advertisments, ect, as posters, roll up banner,
Ships to United States
50" (1.27m) Glossy W/P PP Film (180)
Item Code: BS-180GN-50R-NS
. The back paper is 150um PP, glossy, water proof coating, keeping the vivid color for a longer time. . The material is hard to be torn. The printing color is natural and vivid, fast to dry. . Widely used for advertising sign exhibitions, indoor advertisments, ect, as posters, roll up banner,
Ships to United States
42" (1.07m) Glossy W/P PP Film (180)
Item Code: BS-180GN-42R-NS
. The back paper is 150um PP, glossy, water proof coating, keeping the vivid color for a longer time. . The material is hard to be torn. The printing color is natural and vivid, fast to dry. . Widely used for advertising sign exhibitions, indoor advertisments, ect, as posters, roll up banner,
Ships to United States
