Cart 
Order Tracking
Human K-JET Printer Material Sensor
Item Code: ACC-HM-010
Human K-JET Printer Material Sensor Printer Compatibility: Human K-JET Printers Manufacturer: Human Part number: ESS4171
Ships to United States
13.1ft Wing Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SWING-3
: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope
Ships to United States
13.1ft Feather Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CF-3
be an ideal fit for you in the event you are placing your Feather Flag Banner Stand a flat surface. The Cross Base also enables your flag to spin around the base when there is a breeze. This portable flag stand are not designed to be used in winds exceeding 20 MPH. With double sided printing we
Ships to United States
50"(1.27m*30m) Printing Media UV PET Magnetic Roll Film
Item Code: SIC-NM-UV-CT30B-1270
Description: Extra thin Extra wide A kind of direct printalbe magnetic film with high quality printing outcomes. It is ideal for POP/Retail shop solution, refrigerator magnet, commercial signage, banner, poster, indoor & outdoor graphics etc., which can be placed on metallic/iron surface directly
Ships to United States
50"(1.27m*30m) Printing Media Solvent PET Magnetic Roll Film
Item Code: SIC-NM-SOL-CT30B-1270
Description: Extra thin Extra wide A kind of direct printalbe magnetic film with high quality printing outcomes. It is ideal for POP/Retail shop solution, refrigerator magnet, commercial signage, banner, poster, indoor & outdoor graphics etc., which can be placed on metallic/iron surface
Ships to United States
50"(1.27m*30m) Printing Media Solvent PET Steel Roll Film Magnetic Receptive
Item Code: SIC-FF-SOL-CT340-1270
• Flexible and printable magnetic receptive material. • Suitable for solvent and eco-solvent printer. • Multi-layers which adsorb three layer pictures. • Produce from environmentally friendly materials. Warm Tips: This product is NOT a magnet. It is made for attracting
Ships to United States
50"(1.27m*30m) Printing Media UV PET Steel Roll Film Magnetic Receptive
Item Code: SIC-FF-UV-CT320-1270
• Flexible and printable magnetic receptive material • Not magnet but has good holding power and stability Warm Tips: This product is NOT a magnet. It is made for attracting magnets but does not have any pulling power of its own. • Suitable for
Ships to United States
13.1 ft Feather Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SF-3
digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike – for its use on grass or earth. • Light weighted flagpole. Simple handling, no tools required. Includes: Spike base, Poles, Double sided graphic printing
Ships to United States
13.1 ft Wing Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CWING-3
handling, no tools required. Includes: Cross base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and
Ships to United States
13.1ft Wing Banner with Spike Base (Double Sided Printing)
Item Code: SIC-FB-SWINGD-3
banner bottom then use the key snap trigger to lock at the bottom of pole, and the last step, put the pole into the spike. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand
Ships to United States
13.1 ft Feather Banner with Cross Base (Double Sided Printing)
Item Code: SIC-FB-CFD-3
be an ideal fit for you in the event you are placing your Feather Flag Banner Stand a flat surface. The Cross Base also enables your flag to spin around the base when there is a breeze. This portable flag stand are not designed to be used in winds exceeding 20 MPH. With double sided printing we
Ships to United States
13.1 ft Wing Banner with Cross Base (Double Sided Printing)
Item Code: SIC-FB-CWINGD-3
tools required. Includes: Cross base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and
Ships to United States
13.1 ft Feather Banner with Spike Base (Double Sided Printing)
Item Code: SIC-FB-SFD-3
;Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom
Ships to United States
13.1 ft Wing Banner with Cross Water Bag Base (Single Sided Printing)
Item Code: SIC-FB-CWW-3
. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly
Ships to United States
13.1 ft Feather Banner with Cross Water Bag Base (Single Sided Printing)
Item Code: SIC-FB-CWF-3
. • Light weighted flagpole. Simple handling, no tools required. Includes: Cross base, Water bag, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up
Ships to United States
13*3mm Metal Hand Held Flat Slot Hole Punch for ID Card and PVC Card
Item Code: CS-A-101
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is elegant and convenient and applicable easily. The hole it punches is of standard without coarse edges. It's white color and convenient to punch by hand.
Ships to United States
13*3mm Plastic Hand Hold ID Card PVC Card Flat Slot Hole Punch
Item Code: CS-A-008
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is convenient and applicable easily. The hole it punches by hand is of standard without coarse edges. It is suitable for suspension nip.
Ships to United States
13.1 ft Feather Banner with Cross Water Bag Base(Double Sided Printing)
Item Code: SIC-FB-CWFD-3
; • Light weighted flagpole. Simple handling, no tools required. Includes: Cross base, Water bag, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the
Ships to United States
13.1 ft Wing Banner with Cross Water Bag Base (Double Sided Printing)
Item Code: SIC-FB-CWWD-3
. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, open the cross base and fill up the water bag with full of water, and put it on the cross base. Secondly
Ships to United States
340mm(13.4") Double Sides Hot Photo Laminator
Item Code: FMJ-360-RD-I
FMJ-RD Series DOUBLE SIDES HOT Laminator Both cold and hot laminators. It can conduct mounting and hot lamination with a single side or double side lamination, available in 360mm and 650mm. Product Highlights: . Maximum working film width, form 13” up to 24”. . Electric model
Ships to United States
￠0.3" x 3.1" (7 x 80mm) Sign Supports Stand Offs
Item Code: CS-AN-8-74
Description: • Full range of specifications • Convenient and durable • Available for fixing crystal light boxes, crystal handicrafts, glassware, etc. Specifications: Size: ￠0.3"×3.1" (7× 80mm) Material: Galvanized iron Color: Glossy Notice: The price above is
Ships to United States
13.1 ft Pole with Spike Base Flag Banner Stand
Item Code: SIC-FB-S-2
Features: . Carbon composite fiber poles, superb flexibility to prevent breaking. . Ground spike - for use on grass or earth. . Flagpole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Carry bag. Description: The poles made up of 2 piece aluminum pole and 2 piece carbon pole that can be quickly removed from `the` base to bring the unit it at the close of each business day. The ground spike is designed for use outdoors, as it can be hammered into `the` ground. This base option is designed for dirt or grassy areas.
Ships to United States
13.1 ft Pole with Cross Base Flag Banner Stand
Item Code: SIC-FB-C-2
Features: . Carbon composite fiber poles, superb flexibility to prevent breaking. . Rotating Cross Base - For use on concrete or hard floors. . Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Poles, Carry bag. Description: The poles made up of 2 piece aluminum pole and 2 piece carbon pole that can be quickly removed from `the` base to bring the unit it at the close of each business day. The strong cross base can be used on concrete or hard floors. It is can be easy placing your display on the ground indoors or outdoors.
Ships to United States
