Cart 
Order Tracking
Epson Stylus Pro 9700 Main Board-2144290
Item Code: ACC-EPS-234
Epson Stylus Pro 9700 Main Board-2144290 Printer Compatibility: Epson Stylus Pro 9700 Manufacture: Epson
Ships to United States
Epson 7700 / 9700 / 9910 / 7910 Printhead - F191010 / F191040 / F191080 / F191110 / F191140
Item Code: PRH-EPS-013
Epson 7700 / 9700 / 9910 / 7910 Printhead - F191010 / F191040 / F191080 / F191110 / F191140 To be used with: Epson Stylus Pro 7710 / 7900 / 7910 / 9710 / 9900 / 9910 / 9910SPE / Epson SureColor P9080 Part number: F191040 / F191010 / F191080 / F191110 / F191140 Remarks: Original Attention: 1
Ships to United States
Chip Resetter for Epson Stylus Pro 7700 / 9700 / 7710 / 9710 / 7890 / 9890 Ink Cartridge
Item Code: ACC-EPS-147
Attention Please: Reset the chip before the ink level falling to 15%. It won't work when the ink used out! Chip Resetter for Epson 7700 / 9700 / 7710 / 9710 / 7890 / 9890 Ink Cartridge Printer Compatibility: Epson Stylus Pro7900 / 9900 / 7910 / 9910 / 7700 / 9700 / 7710 / 9710 / 7890
Ships to United States
Epson Stylus Pro 9700 Waste Ink Tank Sensor
Item Code: ACC-EPS-244
Attention Please: Reset the chip before the ink level falling to 15%. It won't work when the ink used out! Epson Stylus Pro 9700 Waste Ink Tank Sensor Printer Compatibility: Epson Stylus pro 7700 / 9700 / 7710 / 9710 / 7890 / 9890 / 11880 Manufacturer: Ving Parts
Ships to United States
EPSON Stylus Pro 7700 7710 9700 9710 Printer English Service Manual
Item Code: SER-MAN-EPS-7700
Title: EPSON Stylus Pro 7700 7710 9700 9710 Printer English Service Manual Format: PDF Size: 36 MB Notice: 1. FREE Shipping & Handling cost 2. We will ship the PDF file through your paypal email within 1-12 hours. 3. If you can't find the document that you need, please just click "
Ships to United States
Original Roland FJ-740 / FP-740 Fuse, 3.15A 72V - 12559102
Item Code: ACC-ROL-078
Original Roland FJ-740 / FP-740 Fuse, 3.15A 72V - 12559102 Printer Compatibility: Roland CJ-540 / FJ-540 / FJ-740 / FP-740 / SC-540 / SC-545 EX / SJ-1000 / SJ-1045 EX / SJ-540 / SJ-640 / SJ-645 EX / SJ-740 /SJ-745 EX / SP-300 / SP-300V / SP-540V / FJ-400 Manufacturer: Roland
Ships to United States
Epson Stylus Pro 9700 Cutter
Item Code: ACC-EPS-312
Epson Stylus Pro 9700 Cutter Printer Compatibility: Epson Stylus Pro 7910 / 9910 / 7908 / 9908 / 7710 / 9710 / 7700 / 9700 / 9890 Gross Weight: 100g/pc Manufacture: Epson
Ships to United States
Epson Stylus Pro 9700 / 7700 / 7710 / 9710 Ink Tank Assy
Item Code: ACC-EPS-382
Epson Stylus Pro 9700 / 7700 / 7710 / 9710 Ink Tank Assy Printer Compatibility: Epson Stylus Pro 9700 / 7700 / 7710 / 9710 Manufacture: Epson
Ships to United States
Original Epson Stylus Pro 9700 / 7710 / 7910 Roller Pulley (Flange)
Item Code: ACC-EPS-471
Original Epson Stylus Pro 9700 / 7710 / 7910 Roller Pulley (Flange) Printer Compatibility: Epson Stylus Pro 9700 / 7710 / 7910 / 7908 / 9910 / 9908 / 9710 Epson Stylus SureColor P6080 / P8080 Manufacture: Epson
Ships to United States
Original Epson Stylus Pro 9910 / 9908 / 9900 / 9700 / 9890 Belt - 1504213
Item Code: ACC-EPS-381
Original Epson Stylus Pro 9910 / 9908 / 9900 / 9700 / 9890 Belt - 1504213 Printer Compatibility: Epson Stylus Pro9910 / 9908 / 9900 / 9700 / 9890 Product size: 170 x 5mm Manufacture: Epson
Ships to United States
US Stock - Chip Resetter for Epson Stylus Pro 7700 / 9700 / 7710 / 9710 / 7890 / 9890 Ink Cartridge
Item Code: ACC-EPS-147-US
Other Countries Please Click Here to Order: /products/5993/chip resetter_for_epson_stylus_pro 7700_9700_7710_9710_7890_9890 ink cartridge.html Chip Resetter for Epson 7700 / 9700 / 7710 / 9710 / 7890 / 9890 Ink Cartridge Printer Compatibility: Epson Stylus Pro7900 / 9900 / 7910 / 9910 / 7700
Ships to United States
Original Epson Stylus Pro 7710 / 9710 / 7700 / 9700 Panel Unit (Second Hand)
Item Code: ACC-EPS-490
Original Epson Stylus Pro 7710 / 9710 / 7700 / 9700 Panel Unit (Second Hand) Printer compatibility: Epson Stylus Pro 7710 / 9710 / 7700 / 9700 Manufacturer: Epson
Ships to United States
Original Epson Stylus Pro 9700 / 7910 / 7710 / 9710 / 7908 Long Data Cable, 3pcs/set. CN100, CN101, CN104 (2142275, 2142267, 2142269)
Item Code: ACC-EPS-457
Original Epson Stylus Pro 9700 / 7910 / 7710 / 9710 / 7908 Long Data Cable, 3pcs/set. CN100, CN101, CN104 (2142275, 2142267, 2142269) Printer Compatibility: Epson Stylus Pro 9700 / 7910 / 9910 / 7710 / 9710 / 9908 / 7908 Epson Stylus SureColor P6080 / P8080 Manufacture: Epson
Ships to United States
CALCA ORDER LED MultiSignsBar Channel Letter with Tracks Hoisted
Item Code: CLM-SP-GD-CZ010
. Below and on both sides of the track but also offer wide range of colors for these letter lights,which can be easily changed by simply replace the panel. Additionally. The combination of letters and numbers can take on various forms, creating different word sand customizable patterns to meet the
Ships to United States
Mimaki GP50 Fuse 5A
Item Code: ACC-MIM-182
Mimaki GP50 Fuse 5A Printer Compatibility: Mimaki JV3-130 Manufacturer: Mimaki
Ships to United States
Bulk Order-Sublimation Mugs Blank White Coated Mugs B Grade 11OZ For Heat Press Printing
Item Code: HTC-SKB01-B-BS
sublimation paper by Epson printer with sublimation ink. • Use the kapton tape to secure the paper image tightly around the mug. • Make sure it is centered in the cuff and the handle of the mug is to the far left. • Press down the lever. • Waiting for the right time
Ships to United States
US Stock CALCA ORDER LED MultiSignsBar Channel Letter with Tracks Hoisted
Item Code: CLM-SP-GD-CZ010-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA ORDER L E D MultiSignsBar Channel Letter with Tracks
Ships to United States
220V 8KW Conveyor Tunnel Dryer 31.5in by 7.2ft
Item Code: SPM-HSW-H800-1
220V 8000W Conveyor Tunnel Dryer 7.2ft Long x 31.5in Wide Belt This tunnel dryer, the overall design is reasonable, the heat preservation performance is strong, less heat loss, less power consumption. Advantages: Quick drying, good effect, simple operation, energy conservation, environmental protection, excellent performance, powerful, durable, low maintenance rate, energy saving save electricity above 30%. Fuselage shell: Fine steel material to make a hard and durable of the fuselage, the whole body of the lacquer that bake to imported cars chassis not to drop paint, does not rust, easy cleaning, beautiful appearance design and easy! From a small production shop to large scale drying operation, this series are multi-purpose dryers that can handle water-based textile inks, direct-to-garment inks as well as traditional plastisol and solvent-based evaporative inks. Specification: Total Length: 7.2ft / 220cm Total Width: 46.4 in / 118 cm Belt width: 31.5in / 80cm Belt to the ground height: 29in / 74cm Enter /exit length: 23.6in / 60cm each Oven chamber length: 39.37in / 100cm Chamber height: 43.3in /110cm Lamp: infrared carbon fiber lamp Constant temperature range: 0-356℉ / 0-180 ℃ Heater wattage: 8 KW Ma Power supply: 220V / 60Hz 2 Year Warranty on Heaters Feature: 1.Internal circulation of hot air: the specific operation of the internal circulation device of hot air is as follows: the air in a group of every meter is sucked from the lower part of the mesh belt, and then blown from the upper part to the lamp tube, the hot air flows downward to form the hot air circulation, so as to evenly heat the box and prevent heat accumulation. 2.The tunnel furnace, the whole machine aluminum alloy frame structure, easy installation and relocation, the machine 1 set of fan system, 1 set of temperature control system, 1 set of independent speed regulating device network belt. 3.This structure is the latest high efficiency and energy saving device, which can ensure the rapid dehydration and solidification of the cloth.The machine can run efficiently for a long time.The normal power consumption of the whole machine is about 2-3kw. 4.Automatic tube fault detection function: there is a lamp tube damage alarm prompt, you can know which lamp is damaged. Details: Remarks: The tunnel furnace to clean the filter every 30 days; Please add lubricating oil to the joint bearing every 90 days, the appearance, please keep clean. When the machine runs about 300 hours, the module alarm, three LED lights, the need to promptly clean up the electric box and filter, press the RSET key to return to normal.
Ships to United States
54in by 50yd (1.37m by 45.72m) Matte Textured Printable Anti-slip Floor Lamination Film, 8.66 Mil
Item Code: BS-YL-UV-140G-54R
Anti-slip protective film`s purpose is in it`s name – it is used to cover the floor and prevent slipping. It can be used for floor graphics or advertising as well. Textured transparent surface film with adhesive with silicon coated line This PVC textured laminate was specially designed to be a protective overlay for virtually any substrate with high tack adhesive to create a temporary Floor advertisement. Formulated solvent acrylic adhesive for a strong bond and exceptional clarity. Feature: 1. Anti-slip and wear-resistant, R9 Anti-slip certification; 2. Good surface smoothness and anti-shrinkage, easy to clean and maintain high definition of the picture. 3. the surface can be directly inkjet printing function. Application: Floor / stair graphics (Shopping Malls, Office Buildings, Airports, Supermarkets, Hospitals, Restaurants, Schools, etc.) Point of purchase displays Counter graphics This matte floor Laminate compatible with New Solvent/UV/Latex Print Media for indoor and outdoor floor graphic applications, incorporates a matte slip resistant textured finish. For removable floor graphics or advertising solutions this lamination film can be used with special floor graphics self-adhesive vinyl (code G150) Details Samples Widely used in the production of posters on the ground. Used for advertising and LOGO images of the flat ground in the activity hall of large shopping malls, subway and TV stations, sports venues (basketball courts, volleyball courts, badminton courts, table tennis courts, etc.), In addition, it can be pasted on the surface (such as wood floor stone \ glass), which can protect the surface material from damage and pollution during decoration.
Ships to United States
36in by 50yd (0.914m by 45.72m) Matte Textured Printable Anti-slip Floor Lamination Film, 8.66 Mil
Item Code: BS-YL-LAM-UV-140G-36R
Anti-slip protective film's purpose is in it's name – it is used to cover the floor and prevent slipping. It can be used for floor graphics or advertising as well. Textured transparent surface film with adhesive with silicon coated line This PVC textured laminate was specially designed to be a protective overlay for virtually any substrate with high tack adhesive to create a temporary Floor advertisement. Formulated solvent acrylic adhesive for a strong bond and exceptional clarity. Feature: 1. Anti-slip and wear-resistant, R9 Anti-slip certification; 2. Good surface smoothness and anti-shrinkage, easy to clean and maintain high definition of the picture. 3. the surface can be directly inkjet printing function. Application: Floor / stair graphics (Shopping Malls, Office Buildings, Airports, Supermarkets, Hospitals, Restaurants, Schools, etc.) Point of purchase displays Counter graphics This matte floor Laminate compatible with New Solvent/UV/Latex Print Media for indoor and outdoor floor graphic applications, incorporates a matte slip resistant textured finish. For removable floor graphics or advertising solutions this lamination film can be used with special floor graphics self-adhesive vinyl (code G150) Details Samples Widely used in the production of posters on the ground. Used for advertising and LOGO images of the flat ground in the activity hall of large shopping malls, subway and TV stations, sports venues (basketball courts, volleyball courts, badminton courts, table tennis courts, etc.), In addition, it can be pasted on the surface (such as wood floor stone \ glass), which can protect the surface material from damage and pollution during decoration.
Ships to United States
Roland SP-300 Fuse, CCF1NTE1.6 - 22555109
Item Code: ACC-ROL-151
Roland SP-300 Fuse, CCF1NTE1.6 - 22555109 Printer Compatibility: Roland SP-300 / SP-300V / SP-540V Manufacturer: Roland
Ships to United States
