Products > "exposure unit rubber":156Products found
20W AC100V-240V to DC 24V Waterproof Rubber Shell  LED Power Supply Transformer Driver

20W AC100V-240V to DC 24V Waterproof Rubber Shell LED Power Supply Transformer Driver

Item Code: LED-IM-LMP20-W1V24

Features: Waterproof: IP67,for outdoor use. 100% Brand new and high quality. High-grade coil. High power factor. Low temperature rise. No noise at all. high efficiency. Over current protection and short circuit protection. For Led Strip Lights ,Wireless Router, ADSL Cats, HUB, Switches, Security Cameras. Specification: Power: 20W Efficiency: 86% Input voltage: AC100V ~ 240V 50Hz -60Hz Output voltage: 24V DC Rated output current: 0.83A Waterproof grade :IP67 Net weight: 0.162kg Product size: 142*30*22mm PFC value: 0.6 Overload protection: auto recovery of 115-135% hiccup mode Operating temperature / humidity: -20 ~ 60 DEG C, 20% ~ 90%RH Ripple and noise: = 100mVp-p-- = 120mVp-p Warranty :5years Application: Certification: Factory: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan

LED Power Supply >>

$7.61 - 8.85/pc

Ships to United States

Details >>

35W AC100V-240V to DC 24V Waterproof Rubber Shell  LED Power Supply Transformer Driver

35W AC100V-240V to DC 24V Waterproof Rubber Shell LED Power Supply Transformer Driver

Item Code: LED-IM-LMP35-W1V24

Features: Waterproof: IP67,for outdoor use. 100% Brand new and high quality. High-grade coil. High power factor. Low temperature rise. No noise at all. high efficiency. Over current protection and short circuit protection. For Led Strip Lights ,Wireless Router, ADSL Cats, HUB, Switches, Security Cameras. Specification: Power: 35W Efficiency: 86% Input voltage: AC100V ~ 240V 50Hz -60Hz Output voltage: 24V DC Rated output current: 1.5A Waterproof grade :IP67 Net weight: 0.288kg Product size: 151*40*30mm PFC value: 0.6 Overload protection: auto recovery of 115-135% hiccup mode Operating temperature / humidity: -20 ~ 60 DEG C, 20% ~ 90%RH Ripple and noise: = 100mVp-p-- = 120mVp-p Warranty :5years Application: Certification: Factory: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan

LED Power Supply >>

$11.36 - 13.21/pc

Ships to United States

Details >>

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(3mm)

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(3mm)

Item Code: CS-GZ-400-3

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(3mm) Specification: Model: CS-GZ-400-3 Brand: CALCA Motor: 60 x 88, wire length 2m Driver: MC542 Power: 24V Shaft Length: 350mm(13.8") Wheelbase: 3mm(0.2") Dimensions: 400 x 125 x 110mm(15.7" x 4

Laser Mechanical Parts >>

$290.70 - 306.00/set

Ships to United States

Details >>

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(40mm)

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(40mm)

Item Code: CS-GZ-400

Rubber Roller Rotary Fixture Rotary Attachment Set for Ring Cup Cylinder Laser Marking(40mm) Specification: Model: CS-GZ-400 Brand: CALCA Motor: 60 x 88, wire length 2m Driver: MC542 Power: 24V Shaft Length: 350mm(13.8") Wheelbase: 40mm(1.6") Dimensions: 400 x 125 x 110mm(15.7" x 4

Laser Mechanical Parts >>

$290.70 - 306.00/set

Ships to United States

Details >>

US Stock-Mimaki JV33 / JV5 Capping Unit - M905240

US Stock-Mimaki JV33 / JV5 Capping Unit - M905240

Item Code: ACC-MIM-010-D-US

The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/1312/us_stock_2_pcs_mimaki_jv33_jv5_capping_unit_out_of_stock

Printer Spare Parts >>

$18.03/pc

Ships to United States

Details >>

Original Epson Stylus Photo R2400 Carriage Unit(Second Hand)

Original Epson Stylus Photo R2400 Carriage Unit(Second Hand)

Item Code: ACC-EPS-154

Epson Stylus Photo R2400 Carriage Unit--Second Hand Printer compatibility: Epson Stylus Photo R2400 Manufacture: Epson Quality report:  

Printer Spare Parts >>

$26.44 - 30.05/pc

Ships to United States

Details >>

H-E parts Mimaki JV5 / JV33 / CJV30 Capping Unit

H-E parts Mimaki JV5 / JV33 / CJV30 Capping Unit

Item Code: ACC-MIM-256

H-E parts Mimaki JV5 / JV33 / CJV30 Capping Unit Printer compatibility: Mimaki CJV150-107 / CJV150-107BS / CJV150-130 / CJV150-130BS / CJV150-160 / CJV150-160BS / CJV150-75 / CJV150-75BS / CJV30-100 / CJV30-100BS / CJV30-130 / CJV30-130BS / CJV30-160 / CJV30-160BS / CJV30-60 / CJV30-60BS / CJV300

Printer Spare Parts >>

$10.52 - 11.69/pc

Ships to United States

Details >>

H-E Parts Capping Unit for New Century

H-E Parts Capping Unit for New Century

Item Code: ACC-MIM-262

H-E Parts Capping Unit for New Century Printer compatibility: New Century:SKY COLOR, STORMJET,SUNIKA Manufacturer: H-E Parts

Printer Spare Parts >>

$10.52 - 11.69/pc

Ships to United States

Details >>

Generic Epson Capping Unit for SureColor S30680 / S40680 / S50680 / S60680

Generic Epson Capping Unit for SureColor S30680 / S40680 / S50680 / S60680

Item Code: ACC-EPS-604

Generic Epson Capping Unit for SureColor S30680 / S40680 / S50680 / S60680 Printer Compatibility: Epson SureColor S30680 / S40680 / S50680 / S60680 / S80680 / S30600 / S30610 / S30650 / S30670 / F6080 / F6070 / F7070 / B6080 Manufacturer: Ving Parts

Printer Spare Parts >>

$15.82 - 20.03/pc

Ships to United States

Details >>

Mimaki JV5 Ink Unit Board (Second Hand) - E104086

Mimaki JV5 Ink Unit Board (Second Hand) - E104086

Item Code: ACC-MIM-175

Mimaki JV5 Ink Unit Board (Second Hand) - E104086 Printer Compatibility: Mimaki JV5-130S / JV5-160S / JV5-260S / JV5-320S / JV5-320DS / TS5-1600AMF Manufacturer: Mimaki    

Printer Spare Parts >>

$227.88 - 250.42/pc

Ships to United States

Details >>

H-E Parts Xaar Capping Unit for Sky-Colour Printers

H-E Parts Xaar Capping Unit for Sky-Colour Printers

Item Code: ACC-LFP-349

H-E Parts Xaar Capping Unit for Sky-Colour Printers Description: Xaar Capping Unit for Sky-Colour Printers. H-E Parts, with Outstanding Performance Innovation: 1 Can provide high sealing even at a low pressure. 2 Higher corrosion resistance 3 Stable size Printer Compatibility: Sky-Colour Printers

Printer Spare Parts >>

$15.02 - 16.69/pc

Ships to United States

Details >>

Original Epson WF-C20600c Main Ink Supply Unit - 1849366

Original Epson WF-C20600c Main Ink Supply Unit - 1849366

Item Code: ACC-EPS-663

Original Epson WF-C20600c Main Ink Supply Unit - 1849366 Printer Compatibility: Epson WF-C20600c Manufacturer: Epson

Printer Spare Parts >>

$189.90 - 208.68/pc

Ships to United States

Details >>

Original Epson WF-C20600c Frame Resist Driven Unit

Original Epson WF-C20600c Frame Resist Driven Unit

Item Code: ACC-EPS-665

Original Epson WF-C20600c Frame Resist Driven Unit Printer Compatibility: Epson WF-C20600c Manufacturer: Epson

Printer Spare Parts >>

$53.17 - 58.43/pc

Ships to United States

Details >>

800W 4 Layers Screen Printing Drying Cabinet Max Exposure size 25 x 23in Screen Press Warming Machine

800W 4 Layers Screen Printing Drying Cabinet Max Exposure size 25 x 23in Screen Press Warming Machine

Item Code: SPM-TJWM-SPE-HBX

Screen Drying Cabinet Screen drying cabinet is an important tool in screen printing. Several procedures need a screen drying cabinet like degreasing screen, coating emulsion, coating hardener and washout and so on. Features: 1.The machine adopts the safest, the best technology plane of the carbon fiber heating plate, sheet of the heating and temperature more uniform; The heating plate use environmental protection material of epoxy resin, resistance to water, oil, pulp, it can be scrubbed, easy to clean; If body touch the bad part of the heating plate, no leakage takes place, at the same time it also won't affect use. Normal service life is more than 10000 hours. 2.Installed the silent axial flow fan in the cabinet to make the circulation of the hot air in the cabinet, and it can make the temperature in the cabinet to be the same. The fan can be normal used more than 10000 hours. 3.Four shelves design, this machine can place 2 pieces screen frame with od 23 x 25 inch (62 x 58cm) at the same time; 2 pieces od 22 x 23 inch (55 x 58 cm). 4.The machine adopts CNC processing, ensure the body sealing and be away from light. 5.The total power of the machine heating plate is 800 w, after setting the temperature, the machine will turn on automatically according to the set temperature, power application, more energy saving province electricity; it is more energy-saving than others. Parameters: Voltage: 220V/110V Power: 800W Max frame size: 25"x21"x1.8" (64x53x4.5cm) Max. amount of drying plate: 4 pieces Highest temperature:126℉(52℃) Instructions: 1.Turn on the switch; then the machine will indicate “F000” and the air fan works automatically. 2.Press “+” until to “F070’ . 3.Place thermometer probe on the third drawer; Check the temp after ten minutes. 4.If the temp is not right in your need, you can adjust the meter to “F080” or “F090” to increase temperature or adjust the meter to “F060” or “F050”reduce temperature. 5.After adjusting the available temp, the machine will automatically save and memory your set data. 6.Take out the thermometer probe and finish the set. 7.It is normal that the “F” or “O” displays alternately when the machine is working. Tips: 1. According to the heat resistant temperature of silk screen, the highest temperature of this machine is 126℉(52℃). 2. Under normal conditions, 126℉(52℃) is appropriate for drying screen mesh. 3. It will indicate the last set parameters while used again because of its automatic data memorizing functions of the equipped intelligent temp controlling system. 4. Reference date: When the temperature is 126℉(52℃), drying the screen coated with our photosensitive emulsion for only one layer takes about 2mins. Drying screen without photosensitive emulsion takes about 1min. Please take it in reference while using. 4.5 Kilograms.  

Washout Booth And Drying Cabinet >>

$299.70 - 333.00/set

Ships to United States

Details >>

2400W 6 Layers  Floor Type Screen Printing Drying Cabinet Max Exposure size 24 x 35 in Screen Press Warming Machine

2400W 6 Layers Floor Type Screen Printing Drying Cabinet Max Exposure size 24 x 35 in Screen Press Warming Machine

Item Code: SPM-TJ-SPE-9060DC

2400W 6 Layers Floor Type Screen Printing Drying Cabinet Max Exposure size 23.6 x 35 in Screen Press Warming Machine Application: This machine is mainly used for (1) drying screen plate after screen degreasing; (2) drying screen plate after coating photosensitive emulsion; (3) drying the finished

Screen Printing Ancillary Equipment >>

$255.43 - 283.81/set

Ships to United States

Details >>

Drying Cabinet Warming Machine Max Exposure size 13.8 x 10.2 in for Cambered Screen Plate

Drying Cabinet Warming Machine Max Exposure size 13.8 x 10.2 in for Cambered Screen Plate

Item Code: SPM-TJ-SPE-JRQ240

Drying Cabinet Warming Machine for Cambered Screen Plate This machine is specially matched for all kinds of cap and mask printing machines produced by our company.This machine is composed of two parts, one is the plate heating table; Two is light-proof box with four layers. Application: 1.Avoid dust and drying the screen plate after degrease and cleaning ; 2.Light-proof drying after coating photosensitive emulsion; 3.Used for heating the shaping resin used in the hard material hat printing machine; 4.Take off the light-proof box, using the heating plate alone, and place the products that need to be dried after printing on the heating plate to dry. Feature: 1.The surface size of the plate heating table is 40*28 cm, and the power is 120W; The surface of the heating table is high quality tempered high temperature resistant glass, not afraid of water, glue, acid and alkali resistance, resistant to cleaning. 2.The inner dimension of the light-proof box is 35 x 26 x 19 cm; There are four layers of screen plate partition, suitable for drying the inner size of 100 x 190 mm (outer size 130 x 200 mm); 100 x 240 mm (outer size 130 x 250 mm) cambered mesh plate. The effect of avoiding light and dust is good. 3.Heat and melt the shaping resin of the hard material hat screen printing machine. 4.Drying upper screen plate; The heating and melting of the lower shaping resin can be carried out simultaneously without affecting each other. 5.Box parts are advanced electrostatic spraying surface treatment, corrosion resistance, acid and alkali resistance, cleaning resistance, long - term use without rust. 6.The light-proof box is directly placed on the heating plate, and the power can be turned on. Temperature test: Room temperature 25 degrees Celsius, turn on 120 degrees Celsius switch; After 15 minutes, the upper temperature in the box is about 45 degrees Celsius; After 30 minutes, the upper temperature in the box is about 55 degrees Celsius, and basically stable. Special note: it may take 40-50 minutes to melt the shaping resin. For quick heating, use a household electric oven or a high temperature hot air gun. Package: Gross weight:16.6 lb /7.55kg Packing size:19 x 17.7 x 11.5 inch /48.5 x 45 x 29 cm  

Dip Tanks And Dark Room >>

$93.16 - 103.51/set

Ships to United States

Details >>

Qili HQ-06 Window Tint Rubber Squeegee Blade Handle Tool Red Scrapper Cleaner Scraper For Car Home Office

Qili HQ-06 Window Tint Rubber Squeegee Blade Handle Tool Red Scrapper Cleaner Scraper For Car Home Office

Item Code: BS-HQ-06

Specifications: Glue length:14CM Thick: 0.5CM Handle length:16.5CM Material: Modified PP+tendon strips Applications: Squeegees are ideal for eliminating bubbles and smoothing the surface on films, vinyl, graphics, stickers, wallpaper, etc. They can be used on car explosion-proof membrane and household adornment  too.

Vinyl Finishing & Storaging Tools >>

$2.25 - 2.50/pc

Ships to United States

Details >>

Loop Rubber Timing Belt 300-3M for CO2 Laser Cutter, 15mm Width and 300mm Length, Pitch 3mm

Loop Rubber Timing Belt 300-3M for CO2 Laser Cutter, 15mm Width and 300mm Length, Pitch 3mm

Item Code: CS-BLT-300-3M-15

Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth

Laser Mechanical Parts >>

$3.55 - 3.82/pc

Ships to United States

Details >>

Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm

Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm

Item Code: CS-BLT-384-3M-15

Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth

Laser Mechanical Parts >>

$4.44 - 4.77/pc

Ships to United States

Details >>

US Stock, 2 pcs Rubber Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu SC Series Vinyl cutting plotter

US Stock, 2 pcs Rubber Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu SC Series Vinyl cutting plotter

Item Code: CS-LY-PRA01-2P-US

Description: • With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability. • The dual-spring set makes it easily to adjust the pressure, so there's an even force on each roller. • Please measure your old pinch roller assembly before your

Vinyl Cutter Replacement Parts >>

$25.54/pack

Ships to United States

Details >>

Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm

Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm

Item Code: CS-BLT-327-3M-15

Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth

Roland Service Manual >>

$4.04 - 4.34/pc

Ships to United States

Details >>

CALCA 2.05" 24pcs Rubber Coaster for Sublimation Tumblers Anti-Slip Self Adhesive Skinny Tumblers Bottom Straight 20OZ

CALCA 2.05" 24pcs Rubber Coaster for Sublimation Tumblers Anti-Slip Self Adhesive Skinny Tumblers Bottom Straight 20OZ

Item Code: SUB-XGSH-RC52-24PC

2.05" 24pcs Rubber Coaster for Sublimation Tumblers Anti-Slip Self Adhesive Skinny Tumblers Bottom Straight 20OZ Material: Rubber Diameter: 5.2cm(2.05") Applicable to: 20OZ Straight Skinny Tumblers Quantity: 24pcs/parcel Weight: 0.2kgs(0.44lbs)/parcel, 5.2g/pc Dimension: 20cm*14cm*7cm(7

Sublimation Metal Mugs & Tumblers >>

$0.13 - 0.15/pc

Ships to United States

Details >>

Subscribe to our special offers:
Follow us: 'like' us on Facebook 'Fallow us on Youtube