Products > "co2 laser tubes180 watt":756Products found
RECI CO2 Sealed Laser Tube 100W-130W W4 / S4 + DY13 110V Power Supply

RECI CO2 Sealed Laser Tube 100W-130W W4 / S4 + DY13 110V Power Supply

Item Code: SIC-LT-W4-DY13-110V

RECI CO2 Laser Tube 100W-130W W4, 10000hr Service Life + DY13 110V Power Supply, for the Laser Engraver Here is a list of items included in this package: RECI CO2 Laser Tube 100W-130W W4, Water Cooling for the Laser Engraver, 10000hr Service Life Features: Output Power: Its

CO2 Laser Tubes >>

$1,044.00/set

Ships to United States

Details >>

US Stock, 130W CO2 Sealed Glass Laser Tube (1650mm Length, 80mm Diameter)

US Stock, 130W CO2 Sealed Glass Laser Tube (1650mm Length, 80mm Diameter)

Item Code: CS-LT-KT165080-130-US

US Stock-130W CO2 Glass Laser Tube (1650mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 130W. Maximum 5, 000 Hours Life Span ¢3.15" x 65" L (¢80mm Dimeter x 1650mm L) Good mode, high power, cost effective, suitable for advertising

CO2 Laser Tubes >>

$1,402.00 - 1,476.00/pc

Ships to United States

Details >>

US Stock-80W CO2 Sealed Glass Laser Tube (1250mm Length, 80mm Diameter)

US Stock-80W CO2 Sealed Glass Laser Tube (1250mm Length, 80mm Diameter)

Item Code: CS-LT-KT125080-80-US

US Stock-80W CO2 Glass Laser Tube (1250mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 90W. Maximum 5, 000 Hours Life Span ¢3.15" x 49" L (¢80mm x 1250mm L) Good mode, high power, cost effective, suitable for advertising industry and

CO2 Laser Tubes >>

$809.00 - 852.00/pc

Ships to United States

Details >>

50mA Ammeter Analog Amp Panel Meter Current for CO2 Laser Engraving Cutting Machine

50mA Ammeter Analog Amp Panel Meter Current for CO2 Laser Engraving Cutting Machine

Item Code: CS-LASER-50A

Specification: Model: 85C1 Test Range: 0~50mA Accuracy: Class 2.5 Weight: 112g Size: 64 x 56 x 52mm Work temperature: -40 ~ +70°C Mounting: Vertical Mounting  

Electronic Components >>

$6.15 - 6.68/pc

Ships to United States

Details >>

Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes

Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes

Item Code: CS-PS-ES100

EFR F4, ZS1450 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and

Laser Power Supply >>

$169.03 - 187.81/set

Ships to United States

Details >>

Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm

Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm

Item Code: CS-BLT-HTD-3M-25

Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (25mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface

Laser Mechanical Parts >>

$6.68 - 8.35/m

Ships to United States

Details >>

Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm

Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm

Item Code: CS-BLT-HTD-3M-17

Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (17mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface

Laser Mechanical Parts >>

$4.20 - 5.25/m

Ships to United States

Details >>

Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm  Length, Pitch 3mm

Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm

Item Code: CS-BLT-2388-3M-15

Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm

Laser Mechanical Parts >>

$20.85 - 22.42/pc

Ships to United States

Details >>

Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm  Length, Pitch 3mm

Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm

Item Code: CS-BLT-1800-3M-15

Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm

Laser Mechanical Parts >>

$13.46 - 14.47/pc

Ships to United States

Details >>

12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA

12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA

Item Code: LCM-KH-320-40W

12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA This 40W CO2 Laser Engraver integrates a lot of upgraded and advanced technologies, all of which guarantee the good quality of high precise and speed. It is a suitable machine to process various nonmetal materials including: acrylic

CO2 Laser Engraver and Cutter >>

$412.00 - 434.00/set

Ships to United States

Details >>

High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines

High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines

Item Code: LCM-KH-750-100W

High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines TThis Laser Engraver is equipped with EFR 100W CO2 Laser Tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP

CO2 Laser Engraver and Cutter >>

$2,156.00 - 2,270.00/set

Ships to United States

Details >>

US Stock, 130W CO2 Laser Cutting and Engraving Machine X-1309

US Stock, 130W CO2 Laser Cutting and Engraving Machine X-1309

Item Code: LCM-KT-X-1309-US

Customers in Other Countries Please Click Here to Order: /products/28758/130w_co2_laser_cutting_and_engraving_machine_x_1309.html US Stock, 130W CO2 Laser Cutting and Engraving Machine X-1309 The X-1309 is designed with user convenience and flexibility in mind. Hardware and software are

CO2 Laser Engraver and Cutter >>

$8,984.00 - 9,766.00/set

Ships to United States

Details >>

Refurbished US Stock, Reci DY10 Power Supply for W2 / S2 CO2 Sealed Laser Tube, 110V, OEM

Refurbished US Stock, Reci DY10 Power Supply for W2 / S2 CO2 Sealed Laser Tube, 110V, OEM

Item Code: RFB-CS-PS-DY10-110V-US

for w2_s2_co2_sealed_laser_tube_110v_oem.html Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor

Laser Power Supply >>

$127.29 - 133.99/set

Ships to United States

Details >>

51in x 35in 150W CO2 Laser Cutter FDA Certificate, with Auto - focus Function

51in x 35in 150W CO2 Laser Cutter FDA Certificate, with Auto - focus Function

Item Code: LCM-KH-1390-150W

51" x 35" 150W 1390 format CO2 Laser Cutting Machine, with USB Port and Electric Lifting Worktable, Auto - focus System, FDA Certificate The machine is a laser engraver and cutter equipped with 150W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal, leather

CO2 Laser Engraver and Cutter >>

$6,459.00/set

Ships to United States

Details >>

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine

Item Code: LCM-KH-960-100W

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine This 100W CO2 laser engraver is a ideal product to process wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics and glass. Please notice that metal materials are excluded. It is a suitable and the preferred choice of

CO2 Laser Engraver and Cutter >>

$3,396.00 - 3,575.00/set

Ships to United States

Details >>

51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate

51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate

Item Code: LCM-DR-1390-130W

51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate The machine is a laser engraver and cutter equipped with 130W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics and glass and etc. It is a suitable and

CO2 Laser Engraver and Cutter >>

$5,953.00/set

Ships to United States

Details >>

Subscribe to our special offers:
Follow us: 'like' us on Facebook 'Fallow us on Youtube