Cart 
Order Tracking
190cm Width Vinyl Film Precisely Roll Cutting Slitter Machine
Item Code: CS-FQ750-190
• Roll Slitter with simple structure. • Cutting materials precisely even to 0.2"(5mm) width. • With a motorized core shaft and single-blade. • Simple structure and convenient to operate. New developed CS-FQ750 roll slitter has a simple structure and is very easy to
Ships to United States
160cm Width Vinyl Film Precisely Roll Cutting Slitter Machine
Item Code: CS-FQ750-160
• Roll Slitter with simple structure. • Cutting materials precisely even to 0.2"(5mm) width. • With a motorized core shaft and single-blade. • Simple structure and convenient to operate. New developed CS-FQ750 roll slitter has a simple structure and is very easy to
Ships to United States
13*3mm Plastic Hand Hold ID Card PVC Card Flat Slot Hole Punch
Item Code: CS-A-008
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is convenient and applicable easily. The hole it punches by hand is of standard without coarse edges. It is suitable for suspension nip.
Ships to United States
13*3mm Metal Hand Held Flat Slot Hole Punch for ID Card and PVC Card
Item Code: CS-A-101
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is elegant and convenient and applicable easily. The hole it punches is of standard without coarse edges. It's white color and convenient to punch by hand.
Ships to United States
33.5" W x 80" H Economy Standard Roll Up Banner Stand (Stand Only)
Item Code: DH-R-SIC-10-100
Description: This aluminum based retractable banner stand known as a pull up banner stand, are very lightweight, sturdy, and professional looking. Set up is extremely quick and simple—just flip out the feet, raise the pole, and lift the banner. This roll up display stand
Ships to United States
39" W x 79" H Good Quality Standard Roll Up Banner Stand (Stand Only)
Item Code: DH-R-SIC-02-100
Description: This roll up display stand, also known as a retractable banner system, is ready to set up almost immediately. Just flip out the feet, raise the pole, and lift the banner. This roll up display stand automatically rolls the banner into `the` base for storage and transportation. Feature
Ships to United States
79" W x 79" HSilver Cap Broad Base Roll Up Banner Stand (Stand Only)
Item Code: YLB-SKL1-6A-200
Feature: This is a high quality broad base roll up banner stand with chroming end caps. Includes: • Broad base, silver caps • 3-Section pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner
Ships to United States
47.3" W x 79" H Good Quality Standard Roll Up Banner Stand (Stand Only)
Item Code: DH-R-SIC-02-120
Description: This roll up display stand, also known as a retractable banner system, is ready to set up almost immediately. Just flip out the feet, raise the pole, and lift the banner. This roll up display stand automatically rolls the banner into `the` base for storage and transportation. Feature
Ships to United States
39" W x 79" H Silver Cap Broad Base Roll Up Banner Stand (Stand Only)
Item Code: YLB-SKL1-6A-100
Feature: This is a high quality broad base roll up banner stand with chroming end caps. Includes: • Broad base, silver caps • 3-Section pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner
Ships to United States
39" W x 79" H Good Quality Double Sided Roll Up Banner Stand (Stand Only)
Item Code: DH-R-S-7-100
Feature: • This is a good quality double sided roll up banner stand. Includes: • Broad base • 3-Section pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner system, is ready to
Ships to United States
59" W x 79" H Silver Cap Broad Base Roll Up Banner Stand (Stand Only)
Item Code: YLB-SKL1-6A-150
Feature: This is a high quality broad base roll up banner stand with chroming end caps. Includes: • Broad base, silver caps • 3-Section pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner
Ships to United States
13.1ft Wing Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SWING-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike - for use on grass or earth. • Flagpole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1ft Feather Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CF-3
Easy 4 Steps to Custom Made Your flag banner stand: Note: Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Feather banners/flags are an excellent way to display advertising for your business at trade shows, and events. They can be easily assembled in a few minutes. Our feather banners are made up of 2 piece aluminum poles and 2 piece carbon poles that inside into the hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. The Cross Base could be an ideal fit for you in the event you are placing your Feather Flag Banner Stand a flat surface. The Cross Base also enables your flag to spin around the base when there is a breeze. This portable flag stand are not designed to be used in winds exceeding 20 MPH. With double sided printing we print on two pieces polyester fabric and stitch them together.This offers a readable image from each side of the flag unlike single sided prints. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a feather flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
340mm(13.4") Double Sides Hot Photo Laminator
Item Code: FMJ-360-RD-I
FMJ-RD Series DOUBLE SIDES HOT Laminator Both cold and hot laminators. It can conduct mounting and hot lamination with a single side or double side lamination, available in 360mm and 650mm. Product Highlights: . Maximum working film width, form 13” up to 24”. . Electric model
Ships to United States
13.1 ft Feather Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-SF-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: This feather banner is a flag that has a ground spike base for posting in the front lawn of a property. The flag that flutters in the wind is not only easier for people to see than a traditional sign, but also the carefully engineered design is inexpensive by comparison. A pole consisting of four segments, 2 aluminum and 2 fiberglass, comes with each feather banner. An intuitive design and light weight means only one person is needed to set up this display. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a full color feather flag, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Ground spike – for its use on grass or earth. • Light weighted flagpole. Simple handling, no tools required. Includes: Spike base, Poles, Double sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand. Firstly, stick the spike into ground and connect the four poles. Secondly, fix the banner on the pole and insert the rope through the hole of banner bottom. Thirdly, use the key snap trigger to lock at the bottom of pole. The last step, put the pole into the spike. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
13.1 ft Wing Banner with Cross Base (Single Sided Printing)
Item Code: SIC-FB-CWING-3
Easy 4 Steps to Custom Made Your flag banner stand: Note:Please exactly follow our artwork requirement in "PDF"tag. Especially all the fonts in the file need to be changed to outlines. Description: Wing Banners are great for indoor and outdoor use and are available in a range of sizes. The innovative rotating mechanism allows them to ‘feather’ out the wind and they are effective individually or in a cluster. Our wing banners are made up of 2 piece aluminum pole and 2 piece carbon pole that inside into `the` hem of a digitally printed and a full-color polyester weave banner that stands upright on the steel base. This portable flag stand are not designed to be used in winds exceeding 20 MPH. Graphic file requirement: • CMYK Color Model • Resolution must be 72-125dpi • Convert all fonts to outlines and include all fonts used Product features: • Includes a wing flag with full color, CMYK digitally printed graphics. • Carbon composite fiber poles, superb flexibility to prevent breaking. • Rotating Cross Base - For use on concrete or hard floors. • Flagpole is lightweight .Simple handling, no tools required. Includes: Cross base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are both accepted. It is easy to install banner stand, first open the cross base, and connect the four poles, then fix up the banner on the pole and insert the rope through the hole at the banner bottom. Use the key snap trigger to lock it at bottom of pole and insert the pole into the base. SINGLE-SIDED VS DOUBLE-SIDED Our Flags are available in single as well as double sided display: DOUBLE SIDED Two single sided banners are sewn back to back to make a double sided display. A block-out material is sewn between two banners to prevent light from shining through. SINGLE SIDED Image is printed on one side of the banner for single sided display. The back side shows up to 95% mirror on reverse image of the front side.
Ships to United States
47.3"W x 79"H Silver Cap Broad Base Roll Up Banner (Stand Only)
Item Code: YLB-SKL1-6A-120
Feature: This is a high quality broad base roll up banner stand with chroming end caps. Includes: • Broad base, silver caps • 3-Section pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner
Ships to United States
