Cart 
Order Tracking
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY20-110V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY10-110V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137
Item Code: ACC-ROL-244
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137 Printer Compatibility: Roland SP-540V / SP-300 / VP-300 / SP-300V Package Size: 2.36" x 2.36" x 0.78" (60 x 60 x 20mm) Gross Weight: 8g Manufacturer: Ving Parts Part No.: 21545137 Warm tips：There
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY10-220V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2/S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
Tajima High Quality Acrylic PVC Board Hook Knife Cutter, Arched Acrylic Hook Knife
Item Code: SIC-ZG-MG-010
Feature: • Arched hook knife for easy holding. • Plastic handle and steel blade made in Japan. • Blade setter with auto-lock function to ensure safe. • The blade can be retracted into the holder after use. • Safety lock system achieves, more safe application and low fatigue in use. • Hook shaped cutting blade is designed to scrape plastic surfaces to reach enough depth to snap apart. • Blade made from high quality tool steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Firstly, cut the acrlic board with the hook craft knife and there is a straight scratch line on the board. Secondly, along the scratch line to break off the board. If the board is a large one, cut the board make the scratch line along the table line, and then press the board by one hand along the scratch line to break it off. Notes: The hook knife is also applicable for cutting PS board and PVC board. The arched acrylic board hook knife is mostly used for cutting acrylic, plexiglass or plastic materials, such as acrylic board, PVC board, Plastic board. However, the simple design makes it easy for personal DIY projects as well. Package:
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY20-220V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
18mm Tajima High Quality Rachet Lock Snap Off Utility Knife Cutter
Item Code: SIC-ZG-MG-005
Description: • Material: Out covering: plastic; Blade: fine steel; • Blade setter with auto-lock function to ensure safe; • High quality blades used, easy to replace; • Professional cutter in comfortable streamline style is perfect composing of plastic and metal. &bull
Ships to United States
Generic Roland SC-545EX Pad Cutter (Length 1500mm, Width 8mm) - 22635116
Item Code: ACC-ROL-311
Generic Roland CJ-540 Pad, Cutter - 22635116 Length 1500mm, Width 8mm Printer Compatibility: Roland CJ-540 / SC-540 / SC-545EX / XC-540 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
15mm Belt Width Timing Synchronous Pulley for CO2 Laser Cutter, Dia. 8mm, 24 Teeth
Item Code: CS-BP-HTD-3M-8
To be used with: Dahua, Yueming, Boye, and Argus Sunic, etc. Laser engraving and cutting machine. 24 tooth gears, aluminium alloy
Ships to United States
9mm Snap Off Utility Knife Blade for Tajima Small Size Craft Knife Cutter
Item Code: SIC-ZG-MG-016
Description: • Package:10pcs / parcel • Handle material: Plastic; • Blade material: steel; • Blade setter with auto-lock function to ensure safe; • High quality blades used; Easy to replace the blade; • Safety lock system achieves more safe application and low fatigue in use. • Hook shaped plastic cutting blade is designed to scrape plastic surfaces to reach enough depth to snap apart. • Blade made from high quality tool steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. • The blade can be retracted into the holder after use. Applicable to: Convenient plastic cutting tool is mostly used for cutting plexiglass or plastic materials, such as acrylic. However, the simple design makes it easy for personal DIY projects as well.
Ships to United States
Generic Roland XR-640 Pad, Cutter - 1000009646 Length 1500mm, Width 7.5mm
Item Code: ACC-ROL-310
Generic Roland XR-640 Pad, Cutter - 1000009646 Length 1500mm, Width 7.5mm Printer Compatibility: Roland XR-640 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
Generic Roland VP-540 / VS-540 Pad Cutter(Length 1460mm, Width 5mm) - 1000002598
Item Code: ACC-ROL-456
Generic Roland VP-540 / VS-540 Pad Cutter(Length 1460mm, Width 5mm) - 1000002598 Printer Compatibility: Roland LEC-540 / SP-540i / VP-540 / VP-540i / SP-540v / VS-540 / VS-540i Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
Generic Roland VS-640 / RE-640 Pad Cutter(Length 171cm, Width 0.5cm) - 1000006713
Item Code: ACC-ROL-457
Generic Roland VS-640 / RE-640 Pad Cutter(Length 171cm, Width 0.5cm) - 1000006713 Printer Compatibility: Generic Roland VS-640 / RE-640 / RA-640 / VS-640i Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
Generic Roland GX-500 Pad Cutter; Length 150cm,Width 0.5cm - 1000001383
Item Code: ACC-ROL-466
Generic Roland GX-500 Pad Cutter - 1000001383 Printer Compatibility: Roland GX-500 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
15mm Belt Width Timing Synchronous Pulley for CO2 Laser Cutter, Dia. 12mm, 24 Teeth
Item Code: CS-BP-HTD-3M-12
To be used with: Dahua, Yueming, Boye, and Argus Sunic, etc. Laser engraving and cutting machine. 24 tooth gears, aluminium alloy
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-XJG-150300DT-P700
Laser Cutting Machine integrates optical, mechanical and electrical in one, which adopts laser technology, computer control technology and high-performance CNC laser power system to process all kinds of metal sheet at high speed, high accurate, high efficiently cutting. Its products have smooth edge, small kerfs width and little heat effect. Open design series: 1) Fiber laser cutting is the fastest process for thin sheet metal. 2) "Clean cut" surface quality. 3) Reflective materials aluminum also can be cut with ease. 4) Parts process cost is very low. Equipment Character and Technology advantage • Using Imported Optical components, good beam quality, high efficiency electronic-optic conversion. • High ratio between quality and price, good reliability, long-term stability • High cutting precision, can meet all requirement of sheet metal processing technology. • Focal length automatic follow with cutting head, even if the material surface roughness and also can ensure cutting quality. • Kerfs smooth, perfect, no need clean. • Low operation cost, all material can cut by air only (If need faster cutting speed, using Oxygen). • Collecting trailer with wheel, light weight design, easy to clean material • Powerful smoking device , solve question of metal processing dust and bad environment • Using Smart mechanical mechanism, compact structure, no need take up large area. • Imported Germany Rexroth liner guide, YASKAWA servo motor drive, High precision ABBA ball screw, let the machine work perfect. • All screw and guide rail and other motor with auxiliary lubrication system together, use centralized supply lubrication way, effective ensure lifetime and working precision on each motor. • Use USA PMAC CNC control software , which can realize 8 axis multi-control , compatible with the full closed loop design, which can position the correct real moving distance, then make compensation , even after long-term using , the machine can work with high precision. 700W N-light Fiber laser cutting parameter: Materials Carbon steel Stainless steel Al Brass Gas Oxygen Air Air Air Thickness Speed Speed Speed Speed (mm) (mm/s) (m/min) (mm/s) (m/min) (mm/s) (m/min) (mm/s) (m/min) 1 260 15.6 188 9.3 90 5.4 80 4.8 2 160 9.6 80 4.8 40 2.4 38 2.3 3 80 4.8 20 1.2 12 0.72 13 0.78 4 30 1.8 10 0.6 5 25 1.5 5 0.3 6 20 1.2 8 15 0.9 10 10 0.6 Equipment Main Components: Use USA N-Light Fiber laser generator, the first laser generator supplier in the world, famous for strong fiber laser power mode, stable optical fiber laser point. With strong laser power , better cutting capacity of the laser equipment Use OEM Precitec Laser Cutting Head, full sealed design, ensure long lifetime of mirrors. Drawer design , easy in changing protection mirror Distinctive scale identification, easy in adjusting focus according to different materials Automatic Focusing system, which keep distance between nozzle and materials, avoid collision YASKAWA Servo Motor can correct the cutting path. Cooperate with full closed loop system to ensure the cutting accuracy. Double Germany Atlanta Rack and Pinion in Y axis moving system in Control. Germany ball screw and Germany Rexroth linger guide in X axis. Top brand mechanical laser parts, which realize high processing speed up to 72M/min. 1. Full closed Loop system is our unique machine feature and advantage. 2. Installing the scale ruler on the working table as traveling response. 3. Automatic corrects the moving position; ensure high working speed working precision and anti-interruption. 1. The machine working table is weld by 12mm square mild sheet, which load capacity is 700KG when machine in working process. 2. Through twice age process and annealing treatment, protect body will not deformation. 1. American PMAC control (Programmable Multi-Axis Controller) 2. 8 axis controller, compatible with full closed loop system to realize high accuracy software control 3. With technical parameter database, including in all materials’ cutting parameter 1. Smart nesting software with flexibility and maximum performance. 2. With powerful nesting functions like: copying, moving, rotating, adjoining, etc, automatic lead- in/lead-out line setup for different types of contours. 3. It can calculate the optimum movement track to make the shortest path, least time consuming and improve overall processing efficiency. Equip with Proportional Valves; ensure the equal gas flow, which realize the clean cutting performance on the metal sheet surface. It used Japanese SNC Proportional valves tech, belongs to software control. Efficient and reliable centralized lubrication system can automatically add oil to machine table and mechanical parts at any time. Smart cooling system, process cooling and heating two functions, keep constant temperature in different seasons and circumstance. With automatic cycle function, reduce water-changing frequency. Controller table, user friendly, easy to operate. Compatible with wireless remote control handle, to make operate more simple and easier. Wireless remote control handle, to realize the function of zero home, frame, start/pause, pre-adjust, X, Y, Z axis movement. It is more convenient for practical use. It is optional for Y axis rotary device, which use for cutting round tube with diameter from 15mm~80mm standard. Equipment Configuration: Configuration Name Details Note Pulse Laser Power Supply system Use Professional High frequency pulse laser cutting Power supply Power Invariability, stable performance Fiber laser system Use IPG/COHERENT Fiber laser source Top quality laser source, more powerful and stable electronic -optical conversion up to 30% Laser light path system Use full sealed optical system Sealed Optical system, ensure High laser energy and mirror lifetime Positioning system Using P-MAC control and full closed loop design indicating laser accuracy Automatically cutting compensation, with long time cutting accuracy guarantee Automatic Tracking system Captive non-contact automatic tracking system Automatic adjustment cutting focus length, ensure the cutting quality Cutting Head System Use Unique OEM Precitec Laser Cutting Head Use Unique OEM Precitec Laser Cutting Head Lubrication system Centralized supply system Supply lubrication oil to working table and guide rail Driving and moving system all us Japan YASKAWA servo motor drive and Use famous Taiwan ABBA brand ball screw and Germany Rexroth guide rail, Germany Atlanta Rack and Pinon high speed, large torgue stable and reliable performance, high precision, convenient, maintenance, longer lifetime CNC system PC control, CNC laser cutting professional USA PMAC cutting software Programmable Multi-Axis Controller, compatible with closed -loop magnetic rule system, which ensure the high precision Support For Graphic format Compatible CAD, CORELDRAW, and other mapping software, support DXF/DWG/PLT graphics format Effective ensure lifetime and working precision on each motor unit Running Cost Analysis (for reference): Power Supply Consumption Laser 3.7 kw/h Total power: 3.7+4+6=13.7(kw/h) Total power consumption: 13.7 x 0.15=2USD/Hour Power price(assumed): 0.15USD/kwh Chiller 4 kw/h Machine tool 6 kw/h Gases Consumption (for cutting different material with different thickness, the consumption is different.) Assistant Gases (Purity 99.5%O2) 3 m3/h Cost: Oxygen cutting 2.5÷5.5×3= 1.36USD/Hour Air cutting costs as low as 0.3USD/Hour 1.Gas price(assumed): 2.5USD/5.5m3 2.Workingcondition(assumed):0.8~2Mpa,continuous processing Consumable and spare parts consumption Focusing lens About 1piece/year Cost: 1600÷4000=0.4 USD/Hour 1.Lens price(assumed): 1600USD/piece 2.Working time(assumed): 4000Hours Protection lens About 2piece/week Cost: 25÷30=0.83 USD/Hour 1.Lens price(assumed): 25USD/piece 2.Working time(assumed) 30 Hours Nozzle 400 hours (according to actual use) Cost: 8÷400=0.02 USD/h 1.Nozzle price(assumed): 8 USD/piece 700W fiber running cost analysis Total cost: 2+1.36+0.4+0.83+0.02=4.61USD/H 1.This table takes N-light 700W laser as an example to make the running cost analysis of laser cutting machine; 2. This tale carried out the analysis of power consumption, gas consumption and consumables consumption and so on. But it do not include the analysis of site rent, management cost, staff salary ,depreciation of machinery and so on; 3.This table is only for reference since the specific consumption will slightly differ with different users under different conditions; Laser Metal cutting Sample: Factory real photos: International Certificate: In metal cutting industry, the metal process group have developed small and medium size metal cutting machine, large area laser cutting machine and combine metal cutting and marking functions in one machine, these three serial 10 type of machine have widely used into Sign marking, electronic switch marking, sheet metal cutting, cabinet producing, spectacle frame cutting, metal craft, machine tools, car, mobile, watch, jewelry industries. Most of the product passed CE and FDA certification, and export to Europe, America and Asia countries.
Ships to United States
R5 5mm Rounder, Round Corner Punch,Paper, Card Photo Cartons Corner Trimmer Cutter, Plastic
Item Code: CS-C-002
Description: This corner trimmer adopts environmental protective design, convenient for carrying and operation. It can change the photos or name cards with right corners into the ones with round corners. It's convenient to operate and carry, it can cut the photos, name cards and others with right angle into the ones with round angle. Features: • Used to turn the right angle to round one. • Suitable for paper,photographs,and card up to 200gsm. • Easy to carry and operate. • Convenient to clean up the chips.Just uncover the transparent side. • Warm tips:We do not suggest cutting materials beyond 200gsm,as it may not work so well. Specifications: Material: Stainless Steel & Plastic Modle: R5 Fillet radius after cutting: 5mm / 0.20" Size: 8.0cmx8.0mx3.2cm Color: Red Details: Usage: Application: The plastic chamfering machine suitable for all kinds of photo paper or name paper. This is smaller one with S model. Before Cutting: After Cutting: Package:
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet, Close Design
Item Code: LCM-XJG-150300JH-P700C
Laser Cutting Machine integrates optical, mechanical and electrical in one, which adopts laser technology, computer control technology and high-performance CNC laser power system to process all kinds of metal sheet at high speed, high accurate, high efficiently cutting. Its products have smooth edge, small kerfs width and little heat effect. Equipment Character and Technology advantage • Using Imported Optical components, good beam quality, high efficiency electronic-optic conversion. • High ratio between quality and price, good reliability, long-term stability • High cutting precision, can meet all requirement of sheet metal processing technology. • Focal length automatic follow with cutting head, even if the material surface roughness and also can ensure cutting quality. • Kerfs smooth, perfect, no need clean. • Low operation cost, all material can cut by air only (If need faster cutting speed, using Oxygen). • Collecting trailer with wheel, light weight design, easy to clean material • Powerful smoking device , solve question of metal processing dust and bad environment • Using Smart mechanical mechanism, compact structure, no need take up large area. • Imported Germany Rexroth liner guide, YASKAWA servo motor drive, High precision ABBA ball screw, let the machine work perfect. • All screw and guide rail and other motor with auxiliary lubrication system together, use centralized supply lubrication way, effective ensure lifetime and working precision on each motor. • Use USA PMAC CNC control software , which can realize 8 axis multi-control , compatible with the full closed loop design, which can position the correct real moving distance, then make compensation , even after long-term using , the machine can work with high precision. 700W N-light Fiber laser cutting parameter: Materials Carbon steel Stainless steel Al Brass Gas Oxygen Air Air Air Thickness Speed Speed Speed Speed (mm) (mm/s) (m/min) (mm/s) (m/min) (mm/s) (m/min) (mm/s) (m/min) 1 260 15.6 188 9.3 90 5.4 80 4.8 2 160 9.6 80 4.8 40 2.4 38 2.3 3 80 4.8 20 1.2 12 0.72 13 0.78 4 30 1.8 10 0.6 5 25 1.5 5 0.3 6 20 1.2 8 15 0.9 10 10 0.6 Equipment Main Components: Use USA N-Light Fiber laser generator, the first laser generator supplier in the world, famous for strong fiber laser power mode, stable optical fiber laser point. With strong laser power , better cutting capacity of the laser equipment Use OEM Precitec Laser Cutting Head, full sealed design, ensure long lifetime of mirrors. Drawer design , easy in changing protection mirror Distinctive scale identification, easy in adjusting focus according to different materials Automatic Focusing system, which keep distance between nozzle and materials, avoid collision YASKAWA Servo Motor can correct the cutting path. Cooperate with full closed loop system to ensure the cutting accuracy. Double Germany Atlanta Rack and Pinion in Y axis moving system in Control. Germany ball screw and Germany Rexroth linger guide in X axis. Top brand mechanical laser parts, which realize high processing speed up to 72M/min. 1. Full closed Loop system is our unique machine feature and advantage. 2. Installing the scale ruler on the working table as traveling response. 3. Automatic corrects the moving position; ensure high working speed working precision and anti-interruption. 1. The machine working table is weld by 12mm square mild sheet, which load capacity is 700KG when machine in working process. 2. Through twice age process and annealing treatment, protect body will not deformation. 1. American PMAC control (Programmable Multi-Axis Controller) 2. 8 axis controller, compatible with full closed loop system to realize high accuracy software control 3. With technical parameter database, including in all materials’ cutting parameter 1. Smart nesting software with flexibility and maximum performance. 2. With powerful nesting functions like: copying, moving, rotating, adjoining, etc, automatic lead- in/lead-out line setup for different types of contours. 3. It can calculate the optimum movement track to make the shortest path, least time consuming and improve overall processing efficiency. Equip with Proportional Valves; ensure the equal gas flow, which realize the clean cutting performance on the metal sheet surface. It used Japanese SNC Proportional valves tech, belongs to software control. Efficient and reliable centralized lubrication system can automatically add oil to machine table and mechanical parts at any time. Smart cooling system, process cooling and heating two functions, keep constant temperature in different seasons and circumstance. With automatic cycle function, reduce water-changing frequency. Controller table, user friendly, easy to operate. Compatible with wireless remote control handle, to make operate more simple and easier. Wireless remote control handle, to realize the function of zero home, frame, start/pause, pre-adjust, X, Y, Z axis movement. It is more convenient for practical use. It is optional for Y axis rotary device, which use for cutting round tube with diameter from 15mm~80mm standard. Equipment Configuration: Configuration Name Details Note Pulse Laser Power Supply system Use Professional High frequency pulse laser cutting Power supply Power Invariability, stable performance Fiber laser system Use N-light Fiber laser source Top quality laser source, more powerful and stable electronic -optical conversion up to 30% Laser light path system Use full sealed optical system Sealed Optical system, ensure High laser energy and mirror lifetime Positioning system Using P-MAC control and full closed loop design indicating laser accuracy Automatically cutting compensation, with long time cutting accuracy guarantee Automatic Tracking system Captive non-contact automatic tracking system Automatic adjustment cutting focus length, ensure the cutting quality Cutting Head System Use Unique OEM Precitec Laser Cutting Head Use Unique OEM Precitec Laser Cutting Head Lubrication system Centralized supply system Supply lubrication oil to working table and guide rail Driving and moving system all us Japan YASKAWA servo motor drive and Use famous Taiwan ABBA brand ball screw and Germany Rexroth guide rail, Germany Atlanta Rack and Pinon high speed, large torgue stable and reliable performance, high precision, convenient, maintenance, longer lifetime CNC system PC control, CNC laser cutting professional USA PMAC cutting software Programmable Multi-Axis Controller, compatible with closed -loop magnetic rule system, which ensure the high precision Support For Graphic format Compatible CAD, CORELDRAW, and other mapping software, support DXF/DWG/PLT graphics format Effective ensure lifetime and working precision on each motor unit Running Cost Analysis (for reference): Power Supply Consumption Laser 3.7 kw/h Total power: 3.7+4+6=13.7(kw/h) Total power consumption: 13.7 x 0.15=2USD/Hour Power price(assumed): 0.15USD/kwh Chiller 4 kw/h Machine tool 6 kw/h Gases Consumption (for cutting different material with different thickness, the consumption is different.) Assistant Gases (Purity 99.5%O2) 3 m3/h Cost: Oxygen cutting 2.5÷5.5×3= 1.36USD/Hour Air cutting costs as low as 0.3USD/Hour 1.Gas price(assumed): 2.5USD/5.5m3 2.Workingcondition(assumed):0.8~2Mpa,continuous processing Consumable and spare parts consumption Focusing lens About 1piece/year Cost: 1600÷4000=0.4 USD/Hour 1.Lens price(assumed): 1600USD/piece 2.Working time(assumed): 4000Hours Protection lens About 2piece/week Cost: 25÷30=0.83 USD/Hour 1.Lens price(assumed): 25USD/piece 2.Working time(assumed) 30 Hours Nozzle 400 hours (according to actual use) Cost: 8÷400=0.02 USD/h 1.Nozzle price(assumed): 8 USD/piece 700W fiber running cost analysis Total cost: 2+1.36+0.4+0.83+0.02=4.61USD/H 1.This table takes N-light 700W laser as an example to make the running cost analysis of laser cutting machine; 2. This tale carried out the analysis of power consumption, gas consumption and consumables consumption and so on. But it do not include the analysis of site rent, management cost, staff salary ,depreciation of machinery and so on; 3.This table is only for reference since the specific consumption will slightly differ with different users under different conditions; Laser Metal cutting Sample: Factory real photos: International Certificate: In metal cutting industry, the metal process group have developed small and medium size metal cutting machine, large area laser cutting machine and combine metal cutting and marking functions in one machine, these three serial 10 type of machine have widely used into Sign marking, electronic switch marking, sheet metal cutting, cabinet producing, spectacle frame cutting, metal craft, machine tools, car, mobile, watch, jewelry industries. Most of the product passed CE and FDA certification, and export to Europe, America and Asia countries.
Ships to United States
AOKE DCZ70 Series 1300 x 1000mm High Speed Flatbed Digital Cutter
Item Code: CS-DCZ70-1310
Description： DCZ70 series flatbed digital cutter is AOKE new developed carton box sample making system, the capability improves a lot comparing with the former, not only the processing speed, processing accuracy, convenient operation, but also the impressive surface.DCZ70 series sample
Ships to United States
US Stock, 96” x 52” XL2513 Laser Cutter, with 150W Laser Tube
Item Code: LCM-XL-2513-150W-US
Free Installation Service is available, welcome contact us! 96” x 52” XL2513 Laser Cutter, with 150W Laser Tube, expand your services and enhance your production! XL 2513 Laser Cutter / Laser Engraver has been designed to maximize productivity. Its powerful 150W laser provides ample
Ships to United States
27.5" 70cm Sliding KT Board Cutting Ruler, Paper Trimmer Ruler, Photo Cutter with Ruler
Item Code: CS-KTPT-HL-001
Description: It is a trimmer which combines a ruler and cutter and on which the cutter slides on the ruler for cutting. It can cut thin materials or thicker ones at thickness max 10mm. There are trapezoid blades furnished which can substitute the art cutting blade when it is broke off. Using hook
Ships to United States
CALCA 63 Inch Manual Large Format Paper Trimmer Cutter with Support Stand
Item Code: CS-JXHY-MT-01
Description: 63 Inch Manual Large Format Paper Trimmer Cutter with Support Stand can cut engineering drawing, photographic paper, wall paper, transfer paper, car sticker, adhesive sticker, PVC,PP,KT board, etc. Adopted ordinary trapezoid blade , blade width can be adjustable. Equipped with a
Ships to United States
14 Inch Manual Precision Rotary Paper Trimmer, Sharp Photo Paper Cutter
Item Code: CS-I-001
Rotary paper trimmer is all designed with automatically paper-fixing function. The automatically rotary blade makes the cutter sharp and durable. The scale indicating both centimeter and inch makes it more accurate, more convenient, more efficient and more applicable, avoiding the movement of paper
Ships to United States
