Cart 
Order Tracking
Roland / Mimaki Bulk Ink System Parts ( for 4 Bottles, 4 Cartridges )
Item Code: ACC-ROL-384
Roland / Mimaki Bulk Ink System Parts ( fpr 4 Bottles, 4 Cartridges ) Printer Compatibility: Nearly almost Roland Inkjet Printer Machines.(not include Roland RA-640 / RE-640 / VS-300 / VS-420 / VS-540 / VS-640) Almost all Mimaki Inkjet Printer Machines Manufacturer: Ving Parts
Ships to United States
Ving Parts Four-way Connector, Water Hydrogen Flame Closed Connection Accessories
Item Code: CS-MS-WC4
Description: Material: A3 steel or brass chrome plated; Used for 6 x 4mm soft tube resistant to chemical; Screw pressing design in hose interface; Screw pressing design, reliable and not disengaged the hose; Can be used for any other similar machines.
Ships to United States
Ving Parts Three-way Connector, Water Hydrogen Flame Closed Connection Accessories
Item Code: CS-MS-WC3
Description: Material: A3 steel or brass chrome plated; Used for 6 x 4mm soft tube resistant to chemical; Screw pressing design in hose interface; Screw pressing design, reliable and not disengaged the hose; Can be used for any other similar machines.
Ships to United States
Roland / Mimaki Bulk Ink System Parts ( for 6 Bottles, 6 Cartridges )
Item Code: ACC-ROL-385
Roland / Mimaki Bulk Ink System Parts ( for 6 Bottles, 6 Cartridges ) Printer Compatibility: Nearly almost Roland Inkjet Printer Machines.(not include Roland RA-640 / RE-640 / VS-300 / VS-420 / VS-540 / VS-640) Almost all Mimaki Inkjet Printer Machines Manufactuer: Ving Parts
Ships to United States
H-E parts DX5 Damper for Mutoh Blizzard / Rockhopper 3 / Spitfire
Item Code: ACC-EPS-508-WT
DX5 Damper for Mutoh Blizzard / Rockhopper 3 / Spitfire Printer compatibility: Mutoh Blizzard / Rockhopper 3 / Spitfire Manufacturer: H-E parts Comparison:
Ships to United States
Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu TC Series Vinyl Cutter
Item Code: CS-LY-PRA02
Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu TC Series Vinyl Cutter Product Details: Description: • With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability. • The dual-spring set makes it easily to adjust
Ships to United States
22mm Fitting Parts Stainless Steel Decorative Screw Cap Mirror Nails for Acrylic Fixings
Item Code: CS-AN-ZG-DIA22
Description: • Material: Stainless steel • Diameter: 22mm • Color: Stainless steel color • Component Parts: 1 cap cover + 1 screw + 1 plastic mouting washer/pc • Package: 4 pcs/pack Details: Cap Screw Mirror Nails Caps Silver Tone Caps Mirror Nail Parts Application
Ships to United States
H-E Parts Pagoda Type Straight Tube Fitting for I.D 3-6mm Tube
Item Code: ACC-LFP-358
Description: 4mm Pagoda Type Straight Tube Fitting for I.D 3-6mm Tube. H-E Parts, with Outstanding Performance Innovation: 1. Extra Large Flow 2. High strength POM material 3. Smooth with No Glitches Printer Compatibility: All Wide Format Printers. Manufacturer: H-E Parts
Ships to United States
US Stock RECI CO2 Laser Tube W4 100W-130W for Replacement Laser Parts (Local Pick-Up)
Item Code: CS-LT-W4-PKU-US
The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: /products/6090/reci_w4_s4_100w_130w_co2_sealed_laser_tube.html High power rate, fast - speed cutting and small size Origin: Asia and Pacific Area China Quality standard: International H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc. Model Rated Power Max Power length Φ Catalyze Life span Warranty W4 100W 130W 1400mm 80mm Yes 10,000h 10 months We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Output Power: Its output power can reach 115w. The production process of the tube is standardized, so the output power and output model are guaranteed. Its cutting effect and cutting speed is the same as 120w laser tube of other brands. (The other laser tubes are handmade, so the quality is different from one tube to another) Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors). Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.) Length: The length is only 1.4m. It reduces the volume of the machine and minimizes freight cost. (The length of other 80w tubes is 2m. 400mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W4 CO2 laser tube is featured as high power rate, good model, fast - speed cutting and small size, which is used for the cutting of leather, cloth and processing of lampshade and handicraft. • Cutting function • Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving. Laser is used in more and more applications! Hollow - out Engraving, you need it! Garment cutting & tailoring, you need it! Leather cutting, you need it!Acrylic board cutting, you need it! DIE board cutting, you need it! Rubber sheet cutting, you need it! Bamboo engraving, you need it! The glass laser tube made in China (i.e. the laser tube) is same with the one imported in processing and applications, but there are big differences in appearance, structure, life span, performance and same to prices. However, for the same power, the imported laser is tens of times higher in comparison with the former. (There is as big differences with same life spans, the imported CO2 laser can be recharged for use while the laser tube made in China is generally disposable to be used one time only). So the Chinese laser is recognized and accepted by domestic & foreign customers since it is economical and practical with lower price. As long as the length parameter is applicable, you can use our tube to substitute! High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃) Very good engraving function: It can compare with 60w laser tubes of other manufacturer. The tube can engrave with 5mA working current when there is still no laser beam in the laser tube. (Other brands: No engraving function) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service） High performance cost ratio: When you buy Reci W4 100W-130W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. How to identify a good or bad laser tube? 1)Install the laser tube properly; 2)Prepare a piece of acrylic board; 3)Put the acrylic board on the light outlet of the laser tube for laser dot test; 4)If it can form a standard conical hole (it proofs the standard TEMOO Basement Membrane Mode was applied), it means the laser tube is qualified. Then you can use it without any worry; Having the TEMOO Basement Membrane Mode is the basic condition for identifying a good quality of laser tube. Only the laser tube possessing the TEMOO Basement Membrane Mode and enriched spectral lines is a first class laser tube. Operating Instruction Installation Requirement 1. Make sure to follow the operation instructions of model W4 as shown in the illustration. The dedicated power DY13 should be equipped. The positive pole is in high voltage (The ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. 2. Operation conditions • Water cooling: Using purified water; 2 to 5 liter / minute; water temperature: 10℃ - 40℃. • The operating environment: temperature 2 - 40℃, humidity 10-60%. • Test current is 29mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. 3. Working Performance 4. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. 5. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. 6. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way. Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. 7. Tubes operated in wrong way will not be guaranteed by Manufacturer. How to check the laser? The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube. We need to exclude other reason of the problem. Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water. Secondly, make sure the mirrors, lens and light rought are all good. Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser. In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Ships to United States
H-E Parts 4mm Threaded Three-way Tube Fitting for 3 x 4mm Tube
Item Code: ACC-LFP-364
Description: 4mm Threaded Three-way Tube Fitting for 3 x 4mm Tube. H-E Parts, with Outstanding Performance Innovation: 1. Extra Large Flow 2. High strength POM material 3. Smooth with No Glitches Printer Compatibility: All Wide Format Printers. Manufacturer: H-E Parts
Ships to United States
MK8 Nozzle 0.4mm Copper 3D Printers Parts Extruder Threaded 1.75mm Filament Head Brass Nozzles
Item Code: 3DP-CXSW-PZ
Description: Item Name:Makerbot MK8 Specification:13mm*6mm Material: Copper of National standard Weight:2g/Pic Hexagon Diameter：6mm Screw Thread :M6 Feed Inlet Diameter:2mm Package Included: 1Xnozzles (0.4MM size) We will send the size and quantity as you choose.
Ships to United States
H-E parts Epson Stylus Pro 7000 Water Based Ink Pump
Item Code: ACC-ROL-313-E
Epson Stylus Pro 7000 Water Based Ink Pump Printer compatibility: Epson Stylus Pro 7000 Manufacturer: H-E parts
Ships to United States
Ving Parts Five-way Connector, Water Hydrogen Flame Closed Connection Accessories
Item Code: CS-MS-WC5
Description: Material: A3 steel or brass chrome plated; Used for 6 x 4mm soft tube resistant to chemical; Screw pressing design in hose interface; Screw pressing design, reliable and not disengaged the hose; Can be used for any other similar machines.
Ships to United States
Ving Parts Six-way Connector, Water Hydrogen Flame Closed Connection Accessories
Item Code: CS-MS-WC6
Description: Material: A3 steel or brass chrome plated; Used for 6 x 4mm soft tube resistant to chemical; Screw pressing design in hose interface; Screw pressing design, reliable and not disengaged the hose; Can be used for any other similar machines.
Ships to United States
H-E Parts Ink Bag Connector for I.D. 2.5-3mm Tube
Item Code: ACC-LFP-361
Description: Ink Bag Connector for I.D. 2.5-3mm Tube. H-E Parts, with Outstanding Performance Innovation: 1. Extra Large Flow 2. High strength POM material 3. Smooth with No Glitches Printer Compatibility: All Wide Format Printers. Manufacturer: H-E Parts
Ships to United States
MIMAKI JV2-130 JV2-90 English Service Manu + Spare Parts Manual (Direct Download)
Item Code: SER-MAN-MIM-JV2-130
Title: Mimaki JV2-130 JV2-90 English Service Manu + Spare Parts Manual (Direct Download) Format: PDF Size: 4.3 MB Description: This manual covers MECHANICAL DRAWING for the JV2/PV series of color inkjet plotter in the field. Content Abstract: The manual includes following content. COVER
Ships to United States
MUTOH Blizzard 65, Blizzard 90 Service Manual - NO PARTS LIST (Direct Download)
Item Code: SER-MAN-MUT-BLI-65
Title: MUTOH Blizzard 65, Blizzard 90 Service Manual - NO PARTS LIST (Direct Download) Format: .zip Size: 13 MB Notice: 1. You can download the PDF when the payment is made. 2. If you can't find the document that you need, please just click "Ask a Question" Button above
Ships to United States
CANON DR-6050C/DR-7550C/DR-9050C Scanner English Service Manual, Parts List (Direct Download)
Item Code: SER-MAN-CAN-DR-6050C
Title: CANON DR-6050C/DR-7550C/DR-9050C Scanner English Service Manual, Parts List (Direct Download) Format: .ZIP Size: 5.4 MB Notice: 1. You can download the PDF when the payment is made. 2. If you can't find the document that you need, please just click "Ask a Question"
Ships to United States
Gear Base Set Machine Mechanical Parts for Laser Engraving Cutting Machine
Item Code: CS-LM-GB01
Gear Base Set Machine Mechanical Parts for Laser Engraving Cutting Machine Style 1: 3:1 Reduction Gear Box (Y axis 24 / 72 Teeth) 1 Pcs Style 2: Synchronous Gear Base (Y axis 24 Teeth) 1 Pcs Style 3: 3:1 / 2:1 Reduction Gear Box (Y axis 24 / 72 Teeth) 1 Pcs Style 4: Tensioner For X axis 1 Pcs
Ships to United States
Mimaki JV4 Series Color Inkjet Plotter Service Manual + Spare Parts Manual(Direct Download)
Item Code: SER-MAN-MIM-JV4-S
Title: Mimaki JV4 Series Color Inkjet Plotter Service Manual + Spare Parts Manual(Direct Download) Format: .ZIP Size: 4.18MB Include: Mimaki JV4 Series Color Inkjet Plotter Service Manual Mimaki JV4 Series Color Inkjet Plotter Spare Parts Manual Notice: 1. You can
Ships to United States
Waterproof Danger Sign-Keep Hands Away From Moving Parts, Safety Sticker 65x45mm
Item Code: SIC-AQT-02
Description: Keep your facility safe with this OSHA regulated sign. This sign is 65x45mm with self-sticker. Our facility and workplace safety signs help prevent injuries on a daily basis and are often your last line of defense. A safe place to work is a happy and healthy place to work. Details:
Ships to United States
UV Ink Tube 4mmx6mm for Wide Format UV Printers
Item Code: ACC-OT-009
high quality black UV tube(ID mm4, OD mm6) can be used on all UV printers. Printer Compatibility: All UV wide format printers Manufacturer: Ving parts Details: Installation:
Ships to United States
UV Ink Tube 4mmx2.3mm for Wide Format UV Printers
Item Code: ACC-OT-010
Solvent Ink Tube 4mmx2.3mm for UV Wide Format Printers Made by the biggest printer parts supplier in china and offers best performance. Produced by a highly sophisticated machine, perfectly matched with the other parts, all products have to undergo a rigorous testing and optical inspection to
Ships to United States
UV Ink Tube 3mmx5mm for Wide Format UV Printers
Item Code: ACC-OT-008
high quality black UV tube(ID mm3, OD mm5) can be used on all UV printers. Printer Compatibility: All UV wide format printers Manufacturer: Ving parts Details: Installation:
Ships to United States
