Products > "sign stock vector 252525252525252525252527nvopzp":2424Products found
US Stock - 10 pcs 4.3" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder-older

US Stock - 10 pcs 4.3" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder-older

Item Code: CS-MOC-11-10P-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/26887/4_3_quot_vinyl roll_clamp_clip_film_coil_hoop

Vinyl Finishing & Storaging Tools >>

$11.09 - 11.67/pack

Ships to United States

Details >>

US Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

US Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

Item Code: FMJ-1600-H-WARM-US

Customers in Other Countries Please Click Here to Order:  /products/21563/Qomolangma_63_high_end_warm_assist laminator_single_piece_metal construction with_entire_abs_ ooling_cover.html  This 63" Full - auto Wide Format Roll Heat Assisted Laminator with Stand can be widely used for pre - masking vinyl graphic, mount prints on substrate, over laminating inkjet prints and so on. The warm laminator is used to after printing. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc. Features: High End Full auto Warm assist laminator, heat up to 60℃, high speed, take up liner paper automatically ;  One side roller up by hand crank. Roll to roll ; With Side Trimmer installed;  Easy operation by one person; Foot switch for hands free operation;  ABS tooling side cover,more attractive.  Specification: Max. Working Width: 1600mm (63in) Variable Working Speed: 0-9m/min Max. Nip Opening: 35mm (1.378in) Working Temp.: 0-40℃ Alarm Temp.: 80℃ Roller Diameter: 120mm (4.72in) Top Roller Material: Silicone rubber Bottom Roller Material: Natural rubber Drive Motor: AC110V 230V/90W Power Consumption: 1300W Power Requirement: AC110V/50-60Hz Machine Size: 2020mm x 630mm x 1260mm (79.5in x 24.8in x 49.6in) Packing Size: 2050mm x 770mm x 1450mm (80.7in x 30.3in x 57in) Neight Weight: 312KG (686.4lbs) Gross Weight: 400KG (880lbs) Details:

Qomolangma Laminators >>

$5,660.00 - 5,660.00/set

Ships to United States

Details >>

US Stock, HIX Swingman25 Digital Manual Swing-away Heat Press with 20" x 25" Platen

US Stock, HIX Swingman25 Digital Manual Swing-away Heat Press with 20" x 25" Platen

Item Code: HTM-HIX-SWM25-US

Description: Go for it! Apply an astounding 1200 lbs of downward force and transfer images in excess of 19” x 24” in one pressing. The HIX SwingMan 25 features a huge 20” x 25” swing-away heat platen that meets the needs of any commercial textile or sublimation business. The SwingMan 25 is perfect for applying oversized designs on the full front of a shirt It will also be able to accomplish jobs such as applying reflective stripping or names to 3XL and 4XL shirts in one pressing. You can even press an 18″ x 24″ ceramic tile mural in one cycle, saving you time and money. With repeatable print gap settings up to a maximum of 1-3/4’ thick, the SwingMan 25 is also adequate for tiles, plaques, garments, and 3-D items. Uneven pressure is eliminated with the self-leveling design of the lower platens, rendering only high-quality impressions across the surface. The SwingMan 25 20” x 25” platen opens up more opportunities for cut-and-sew manufacturers, signage, and sublimation applications that cover a multitude of substrates. Not only can you press larger items, but the increased size also allows you to press multiple smaller items in one press – perfect for increased production! If your shop has hundreds of pressings to do in one day, you will recognize the advantages this press offers. Using about one-tenth of the energy as you normally would with a regular press, you will appreciate the reduced effort on your arms and shoulders. Features: • Totally integrated digital time and temperature. Turn the heat press on and easily set the temperature (with the press open) on the integrated touch-screen controller. When the press reaches the pre-set temperature (max is 450º), it maintains this value within +/- 2º. Next, set cycle time. When you close the press, the timer will start its countdown. When it reaches “0,” the buzzer will sound. Lifting the upper platen will automatically reset the timer. Note: The press will display its current temperature between cycles.
 • The SwingMan swing-away design not only ensures that the heat is always away from your face, but also that there is no danger of accidentally running your hands up into a very hot heater block (as there may be with a clamshell press). • The SwingMan 25 has the ability to achieve very even pressure on large, thick items or multiple small, thick items because all pressure is exerted perpendicularly onto the lower platen when the press is closed. Upon opening, the heater block lifts straight up and is then swung to the right. The procedure is reversed when closing. Using the convenient swing-arm, the heater block is swung back left (an internal stop positions it over the lower platen). It is then ready to close. It should be noted that the swing requires very little effort to maneuver. • The press accepts setups up to 1.75” thick. This is a very desirable benefit for those shops that want to truly maximize the potential of their press operations. The SwingMan 20 presses tiles, plaques, really thick jackets, sublimatable awards, etc. • ETL Listed. The Electrical Testing Laboratory (ETL) listing for manufacturers is similar to the UL (Underwriters Laboratory) listing for household appliances. The ETL Listed Mark is issued to products that have met the requirements of product safety standards in the US and Canada for residential and commercial use. On a practical basis, this means that all components, wiring, connections, and construction meet a pre-described set of specifications as outlined in that standard. This means that the press is safe in your home or business. • Touch-screen controller with integrated digital timer reading in minutes and seconds, digital temperature settings that range up to 450º F, and full-range repeatable pressure adjustments for items up to 1-3/4” thick. • Lifetime warranty on the heater element and a one-year warranty on other parts of the press. • Heat Platen Size: 20” x 25” (51 x 64 cm) • Voltage: 220V Packing Details: • Dimensions: W 31” x H 25” x D 43” • Weight: 208 lbs (94 kg)  

T-shirt Heat Presses >>

$3,372.00/set

Ships to United States

Details >>

US Stock, HIX HT-400 Digital Manual Clamshell Heat Press with 15"x 15" Platen and Splitter Stand

US Stock, HIX HT-400 Digital Manual Clamshell Heat Press with 15"x 15" Platen and Splitter Stand

Item Code: HTM-HIX-HT400-US

Description: The graphics industry calls this machine “The Workhorse” for good reason – the HIX HT-400 Clamshell Press is rugged, durable, and made to perform. A must-have for any serious start-up business, the HIX HT-400 has earned respect for its numerous capabilities and reliability. With over 100,000 units sold throughout the world, this machine is regarded as an industry standard. Many customers have used this heat press for over 30 years of worry-free service. If you’re looking for high production capabilities, this is the heat press you need! The secret to our success is in the casting. Every heat casting at HIX is manufactured in a permanent steel cavity mold using a HIX-exclusive aluminum alloy for maximum heat transfer. The HT-400 has a 15″ x 15″ heat platen that can apply all types of transfers on items up to 1″ thick. The floating lower platen helps provide even pressure on thicker items, no matter where it’s applied. HIX presses provide completely even pressure from edge to edge, even at high temps. The HT-400 features a touch-screen controller that is adjustable up to 999 seconds, shows time countdown on readout, beeps after elapsed time, and resets when the handle is raised. The calibrated digital temperature control is adjustable up to 450°F (232°C) and displays the current temperature. The easy-to-use open-and-close handle has spring assist and a full range pressure adjustment, provides even pressure on thicker items, and adds 20% more pressure over straight handle designs. Features: • Easy integrated digital time and temperature settings – Touch-screen controller allows simple dialing in of time and temperature. • From the touch-screen controller, preset selections of temperature-time combinations can be easily programmed into the machine. • The current pressure is displayed on the touch-screen display each time the press closes. The pressure is easily changed with the black pressure dial on the face of the control housing (clockwise for more, counter-clockwise for less). There are nine settings: 0-3 for light pressure, 4-6 for medium, and 7-9 for heavy. This is a great feature if you need to press a lot of different thicknesses. • Tilting (floating) lower platen – The bottom platen tilts up toward the upper platen as the heat press closes. This equalizes pressure even when pressing thick items, like a quarter-inch thick 8×10” ceramic tile. • Top Pressure Plate – The handle attaches to a 4″x5″ pressure plate on the top platen instead of a single screw going into the top platen. This provides more even pressure on the outside edges of the press (think of it as pushing down with your entire hand, versus just your thumb). • Certified electrically safe (ETL) – The “Electrical Testing Laboratory” seal means HIX presses have passed a rigid and very demanding independent testing process, and have been certified electrically safe. • 100% Made in the USA – HIX has its own 110,000 sq ft manufacturing facility with its very own fully integrated aluminum foundry, CNC mill operation, welding, metal forming, wiring, fabrication, assembly, and packaging departments. • A one-year general warranty and lifetime warranty on the heater element. • Heat Platen Size: 15” x 15” (38 x 38 cm) • Voltage: 120V Packing Details: • Dimensions: W 21” x H 23” x D 33” • Weight Shipping: 84 lbs(39kg)

T-shirt Heat Presses >>

$1,614.00/set

Ships to United States

Details >>

US Stock, HIX Swingman20 Digital Manual Swing-away Heat Press with 16" x 20" Platen

US Stock, HIX Swingman20 Digital Manual Swing-away Heat Press with 16" x 20" Platen

Item Code: HTM-HIX-SWM20-US

Description: This heat press is for professionals who are serious about maximum production, high-quality impressions, safety, and minimal effort on the operator. The HIX SwingMan 20 sets the industry standard in heat press design for sublimation and textile heat transfer production. This will provide incredible advantages to the operator – reducing fatigue and increasing productivity. The Swingman 20 features a large 16″x 20″ surface area heat platen with our exclusive swing-away design and lifetime warranty on the heating element. What makes the HIX Swingman 20 stand out from all others is the ability to apply over 1200 lbs of downward force with very little effort. Our exclusive progressive linkage method provides a mechanical advantage where a small amount of force on the hand end produces a much larger force on the press end. With the Swingman 20 at maximum pressure, you can literally open and close the press with two fingers! If you are a pro shop with hundreds of pressings to do in one day, you will recognize the advantages this press offers. Using about one-tenth the energy as you normally would with a regular press, you will appreciate the reduced effort on your arms and shoulders. Additional features include: integrated touch-screen controller including a digital timer reading in minutes and seconds, digital temperature settings that range up to 450º F, and full-range repeatable pressure adjustments for items up to 1-3/4” thick. The SwingMan 20 is perfect for pressing ceramic tiles, puff transfers, license plates, hot split transfers, glass cutting boards, rhinestones, mouse pads, garments, plaques, and nail heads. This full-sized swing-away press is a must-have for any serious sublimation shop. Features: • Totally integrated digital time and temperature. Turn the heat press on and easily set the temperature (with the press open) on the integrated touch-screen controller. When the press reaches the pre-set temperature (max is 450º), it maintains this value within +/- 2º. Next, set cycle time. When you close the press, the timer will start its countdown. When it reaches “0,” the buzzer will sound. Lifting the upper platen will automatically reset the timer. Note: The press will display its current temperature between cycles.
 • The SwingMan swing-away design not only ensures that the heat is always away from your face, but also that there is no danger of accidentally running your hands up into a very hot heater block (as there may be with a clamshell press). • The SwingMan 20 has the ability to achieve very even pressure on large, thick items or multiple small, thick items because all pressure is exerted perpendicularly onto the lower platen when the press is closed. Upon opening, the heater block lifts straight up and is then swung to the right. The procedure is reversed when closing. Using the convenient swing-arm, the heater block is swung back left (an internal stop positions it over the lower platen). It is then ready to close. It should be noted that the swing requires very little effort to maneuver. • The press accepts setups up to 1.75” thick. This is a very desirable benefit for those shops that want to truly maximize the potential of their press operations. The SwingMan 20 presses tiles, plaques, really thick jackets, sublimatable awards, etc. • ETL Listed. The Electrical Testing Laboratory (ETL) listing for manufacturers is similar to the UL (Underwriters Laboratory) listing for household appliances. The ETL Listed Mark is issued to products that have met the requirements of product safety standards in the US and Canada for residential and commercial use. On a practical basis, this means that all components, wiring, connections, and construction meet a pre-described set of specifications as outlined in that standard. This means that the press is safe in your home or business. • Lifetime warranty on the heater element and a one-year warranty on other parts of the press. • Heat Platen Size: 16” x 20” (41 x 51 cm) • Voltage: 120V Packing Details: • Dimensions: W 22” x H 20” x D 34” • Weight: 121 lbs (55 kg)  

T-shirt Heat Presses >>

$2,234.00/set

Ships to United States

Details >>

US-Stock CALCA A4 DTF UV Printing Christmas DIY Stickers for Water Bottle, Phone Case, Laptop, Skateboard, Guitar, Wall Window

US-Stock CALCA A4 DTF UV Printing Christmas DIY Stickers for Water Bottle, Phone Case, Laptop, Skateboard, Guitar, Wall Window

Item Code: SIC-DTF-UV-FP-US

US-Stock CALCA A4 DTF UV Printing Christmas DIY Stickers for Water Bottle, Phone Case, Laptop, Skateboard, Guitar, Wall Window Easy, fast, low cost and no minimum quantity request make it as one of the new trend of printing technology. The new crystal label AB films printing solution has features

CALCA UV DTF Transfer Film >>

$6.94/pc

Ships to United States

Details >>

US Stock, HIX FH3000 Digital Manual Flathead Small Format Heat Press with 3-3/4" x 6" Platen

US Stock, HIX FH3000 Digital Manual Flathead Small Format Heat Press with 3-3/4" x 6" Platen

Item Code: HTM-HIX-FH3000-US

Description: The HIX FH-3000 is for those who want the ability to create transfers onto shirt pockets, sleeves, cuffs, collars, bags, aprons, name badges, tiles, gloves, and small application jobs. The flat attachment has a maximum area of 3-3/4″ x 6-1/4″. The FH-3000 can be purchased with the flat attachment, the cube attachment, or with both attachments. It features a touch-screen controller that is adjustable up to 999 seconds and shows countdown on readout. Then it beeps after the elapsed time, and resets when the open-and-close handle (with full-range pressure adjustment) is raised. The calibrated digital temperature control is adjustable up to 450°F (232°C) and displays the current temperature. The flat attachment has a maximum area of 3-3/4″ x 6-1/4″ and is great for doing shirt pockets, sleeves, cuffs, collars, bags, aprons, name badges, tiles, gloves, and small application jobs where a full sized machine is more than required or too large to work with. The cube attachment can be used for cube photo displays or any square workable substrate, and it will do a maximum area of 3-1/2″ x 3-1/2″. The flat and cube attachments are easily interchangeable. What makes this press stand out from any regular press is its ability to give great control (and much less aggravation) on small items, odd shapes, and unwieldy goods. Ever try to put a transfer on an umbrella with a 15” x 15” press? It is much easier with this little dynamo. Some other difficult items the FH-3000 easily tackles include: shirt collars, cuffs and pockets, aprons, tote bags, luggage and golf bag tags, gloves, small tiles, watch faces, and much more. For small imprints on hard to handle or bulky items, this is a dandy little solution! As an added bonus, the FH-3000 only draws a maximum of 4 amps to maintain temperature. This means less energy and reduced electric bills by about 66% (compared to a standard 15” x15” press). This hardworking little press is manufactured with the same features, warranty, and craftsmanship as its bigger brothers and sisters. Single-pass milled heat platens provide an ultra flat surface for even heating, while finger-tip heating, timing and pressure controls, and an easy-to-read temperature gauge complete the package. This specialized press could turn the most difficult projects into the easiest. Features: • It has a limited 1-year warranty and a lifetime warranty on the heating element. • A manual pressure adjustment is located at the back of the platen mount. • ETL-certified. The “Electrical Testing Laboratory” seal means HIX presses have passed a rigid and very demanding independent testing process and have been certified electrically safe. • 100% Made in the USA – HIX has their own fully integrated aluminum foundry, CNC mill operation, welding, metal forming, wiring, fabrication, assembly, and packaging departments. • Voltage: 120V Packing Details: • Dimensions: W 16” x H 19” x D 19” • Weight Shipping: 30 lbs    

T-shirt Heat Presses >>

$1,157.00/set

Ships to United States

Details >>

US Stock, HIX HT-600 Digital Manual Clamshell Heat Press with 16"x 20" Platen and Splitter Stand

US Stock, HIX HT-600 Digital Manual Clamshell Heat Press with 16"x 20" Platen and Splitter Stand

Item Code: HTM-HIX-HT600-US

Description: The HIX HT-600 Clamshell Press ensures that your larger heat transfer impressions are perfect from edge to edge. With a larger 16” x 20” platen surface, you’ll be capable of handing those transfers that require more surface area. Built with the same features and performance characteristics as the HT-400, the HT-600 has an increased heat platen (16″x20″) that can apply even pressure on all types of transfers, even on items up to ½-inch thick. The floating lower platen helps provide even pressure on thicker items, no matter were it’s applied. The HT-600 drives the industry in the manual heat presses for its ruggedness, durability, and years of trouble-free performance. There is no better press that will handle the production demands and provide the coverage quality like the HT-600. The HT-600 features a touch-screen controller with a digital timer. It is adjustable up to 999 seconds, shows time countdown on readout, beeps after elapsed time, and resets when the handle is raised. The calibrated digital temperature control is adjustable up to 450°F (232°C) and displays the current temperature. The easy to use open and close handle has spring assist and a full-range pressure adjustment. It provides even pressure on thicker items and adds 20% more pressure over straight handle designs. Features: • Easy integrated digital time and temperature settings – Touch-screen controller allows simple dialing in of time and temperature. • From the touch-screen controller, preset selections of temperature-time combinations can be easily programmed into the machine. • The current pressure is displayed on the touch-screen display each time the press closes. The pressure is easily changed with the black pressure dial on the face of the control housing (clockwise for more, counter-clockwise for less). There are nine settings: 0-3 for light pressure, 4-6 for medium, and 7-9 for heavy. This is a great feature if you need to press a lot of different thicknesses. • Tilting (floating) lower platen – The bottom platen tilts up toward the upper platen as the heat press closes. This equalizes pressure even when pressing thick items, like a quarter-inch thick 8×10” ceramic tile. • Top Pressure Plate – The handle attaches to a 4″x5″ pressure plate on the top platen instead of a single screw going into the top platen. This provides more even pressure on the outside edges of the press (think of it as pushing down with your entire hand, versus just your thumb). • Certified electrically safe (ETL) – The “Electrical Testing Laboratory” seal means HIX presses have passed a rigid and very demanding independent testing process, and have been certified electrically safe. • 100% Made in the USA – HIX has its own 110,000 sq ft manufacturing facility with its very own fully integrated aluminum foundry, CNC mill operation, welding, metal forming, wiring, fabrication, assembly, and packaging departments. • A one-year general warranty and lifetime warranty on the heater element. • Heat Platen Size: 16” x 20” (41 x 51 cm) • Voltage: 120V Packing Details: • Dimensions: W 21” x H 23” x D 33” • Weight Shipping: 95 lbs(44kg)

T-shirt Heat Presses >>

$1,822.00/set

Ships to United States

Details >>

US Stock 10 pcs 5.9" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder

US Stock 10 pcs 5.9" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder

Item Code: CS-MOC-15-10P-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/26889/5_9_quot vinyl_roll_clamp_clip_film_coil_hoop

Vinyl Finishing & Storaging Tools >>

$10.22 - 10.76/pack

Ships to United States

Details >>

US Stock, 63" x 164´ Digital Direct Print Frame Fabric 100% Polyester (250gsm) (Local Pick-Up)

US Stock, 63" x 164´ Digital Direct Print Frame Fabric 100% Polyester (250gsm) (Local Pick-Up)

Item Code: CS-HTP-TCH-DSGPB10A-PKU-US

Marks: The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: /products/27456/63_quot_250gsm_digital_direct_print_frame_fabric_100_polyester.html 63" x 164' Digital Direct Print Frame Fabric 100% Polyester (250gsm

Direct Printing and Dye Sublimation Fabric >>

$131.11/roll

Ships to United States

Details >>

US Stock-Pneumatic Dual-axis Metal Strip Letter Bending Machine for Making LED Letter Signs 3.9"(100mm)

US Stock-Pneumatic Dual-axis Metal Strip Letter Bending Machine for Making LED Letter Signs 3.9"(100mm)

Item Code: CS-PLBM-005-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/16037/pneumatic_dual_axis_metal_strip_letter_bending

Channel Letter Making Tools >>

$134.90 - 142.00/set

Ships to United States

Details >>

Australia Stock, 51" x 35" 1390 Luxury Laser Engraving and Cutter, with EFR F4 100W-130W Laser Tube

Australia Stock, 51" x 35" 1390 Luxury Laser Engraving and Cutter, with EFR F4 100W-130W Laser Tube

Item Code: LCM-BY-Z1390-100W-AU

Main Configuration: Max. Working Area: 51" x 35" (1300mm x 900mm) Max. Cutting Speed: 15.7" (400mm) / s Max. Engraving Speed: 23.6" (600mm) / s Laser Power: EFR F4 CO2 glass laser tube 100W-130W (Normal lifespan: about 10000 working hours) Max. Cutting Thickness (Acrylic): ≤1.2" (30mm) Resolution Ratio: 0.0064mm Min. Shaping Character: Chinese Character: 0.1"  x  0.1" (2mm x 2mm), letter: 1mm x 1mm Location Precision: <0.01mm Power Supply: AC220V±10%, 50Hz Gross Power: <1250W Electric Lifting Worktable(Optional) Control Panel Honey Comb Table(Optional) Laser Head Linear Guide Rotary Fixture(Optional) Instructions of Laser Engraving Cutting Software There are three kinds of RD laser cutting software. One is the direct output software based on CorelDraw (hereinafter referred to as CorelDraw_Laser); the other is based on the direct output software based on AutoCAD (hereinafter referred to as AutoCAD_Laser). In addition, there is another kind of independent software (hereinafter referred to as LaserWork), which is more simple to use in the first stage of using laser cutting machines. Why buy from us? Best quality control system in low power laser industry! Parts quality guaranteed The main board and power supply of laser cutting machine were put into an oven at temperature of 50 degree for an aging test, minimally 4 hours. Laser head Enclosed, with air blowing device, which is safer than unclosed head. Laser Test Each laser tube and its power source shall be tested for 8 hours on/off power test: There are strict inspection criterions for its light beam quality and laser power. Guide rail High precision equilibrium linear guide rail imported from Korea. Each guide rail shall be tested before installation. 100% Check of Materials We perform 100% check to all the parts of laser cutting machine in order to avoid any disqualified parts coming into the next step of work. Inspection Before Delivery Any laser cutting machine before departing the factory, we will perform cutting test with the cutting precision at 0.1mm to test its verticality and dimensional deviation. Test of Main Board & Power Supply Put the main board and power supply of laser cutting machine into an oven at temperature of 50 degree for an aging test, minimally 4 hours. Test of Transmission Parts Check the synchronizing wheel and bearing of the laser engraver whether are concentric and easy in rotation as well as its deviation whether is less or equal to 0.02mm. Processing Crotrol During the production of laser engraving machines, our quality inspector will patrol and check its installation quality. It is mainly to check the parts of mechanics and electrics, cables whether satisfy the requirements of installation blueprint. If any error or problem found, the correction treatment will be executed immediately. Test of Guideway and Rectangular Tube Mainly to test the flatness, linearity and torsion resistance of t the guideway and rectangular tube. Put the rectangular tube and the guideway onto a marble platform, then use dial gage calibrator to check: the tolerance bigger than 0.05mm/m is disqualified. Stretching Force Tester for the Belt of Laser Cutting Machine Ensure the machine platform cutting in consistency. Collimator Test The test method for the linearity, flatness and verticality of the laser cutting machine’s guideway is to use Auto Pricise Collimator 1401 Double-way. Handy Power Indicator of Laser Cutting Machine Any point of the laser cutting machine’s power test, ensure the laser cutting machine to give best cutting effect. Electromagnetic Oscillograph of Laser Cutting Machine To test the electromagnetic interference and ensure the running stability of laser cutting machine. Product Highlights: – 51" x 35" (1300mm x 900mm) working area – Up to 23.6" IPS (600mm/s) high working speed – Pass-through front and rear doors to accommodate long work pieces Three unique protection functions, i.e. anti-interference function, water-protective function and power cut-off function ensure longer working life, safety and effectiveness.  – Laminated Safety Glass, glass viewing windows creating a safe enclosure for laser processing.  – Adopt the super fine cutting technology, which has features of extensive material processing, smooth cutting edge and burr-free, avoid polishing, processing high speed, high precision. – Original Singapore imported lens with molybdenum base, making the equipment produce smaller facula and stronger cutting force, greatly improving working efficiency and reducing cost.  – Exhausting, absorbing and assistant blowing systems solve the problem that troubles the laser equipments manufacturing industry for years, extending the life of the laser tube.  – The laser cutter is equipped with aluminum strip shape platform, which can bear heavier materials, such as organic glass, wood and much more. – This machine uses USB port to transmit data, it is equipped with large internal memory capacity, improving the working speed with greater efficiency. – LCM-BY-Z1309 laser cutting machine, adopts high quality CO2 glass laser tube made in China, with a fine cutting effect and price advantage. – Equipped with high quality water chiller CW5000, which can prolong the lifespan of the laser tube and ensures a better engraving effect. Please download the PDF file of User Manual of LCM-BY-Z Series Laser machine to learn more! I.Machine Installation Include: Laser tube assembly; Water chiller installation; Air pump connection; Exhaust fan installation; Grounding wire connection. II. Software and USB driver Installation  III. Software Operation Edit the images in the engraving software or input the color pictures into the engraving software, edit it, and then set the processing parameters, output images to our laser cutting machine, finish the work. IV. Finished works! Customer Case: Comment: I am dealing with printing and carving business, three months ago, we purchased a set 1300*900mm laser cutting machine, finally we received this machine on October, my technician help install this machine, it works well and it has enough power to cut material, we are satisfied with this machine, thanks for your good service, I will go on our business in future. Quality  report:

CO2 Laser Engraver and Cutter >>

$5,939.00 - 6,387.00/set

Ships to United States

Details >>

US Stock-64" Automatic Media Take up Reel D64 for Mutoh/ Mimaki/ Roland/ Epson Printer (Local Pick-Up)

US Stock-64" Automatic Media Take up Reel D64 for Mutoh/ Mimaki/ Roland/ Epson Printer (Local Pick-Up)

Item Code: SZQ-SH-D64-PKU-US

Customers in Other Countries Please Click Here to Order: /products/17192/64_quot automatic_media_take_up_reel d64 for mutoh mimaki_roland_epson printer_.html The Media Take Up D64 is a convenient and easy-to-use media winding system for selected Roland, Mimaki, Mutoh and other printers that keeps your prints dust free when they leave the printer. Description: The take up system allows you to leave production unattended, with the completed job securely wound, and it is particularly useful for long print runs and large graphics. In print then laminate workflows, the take-up system enables an easy and precise workflow from completion of printing to loading and feeding through roll-to-roll lamination units. The take up unit also reduces media waste and maximizes quality of output by automatically tensioning the vinyl, keeping it tightly wound on the reel to help avoid nicks, creases and scratches in the media. All roll-to-roll materials are automatically wound onto the unit to help you maintain a clean and safe workspace while providing an easy storage. Packing list: 1. Motor: 31 x 31 x 31cm; 7KG 2. Reel: 6 x 4 x 200cm; 5KG Features: Easy installation; Universal system that fits different printer models; Reinforced metallic structure ensures excellent stability; Holds up to 35 kg of printed media; Suitable for outwards and inwards take up; To be used with:  Roland RA-640 / RE-640 / RS-640 / SC-500 /SJ-645ex /VS-640 / XR-640  Mutoh Valuejet 1604 / Valuejet 1614 / Valuejet 1608 / Valuejet 1618 / Valuejet 1624 / Valuejet 1638 / Valuejet 1638W  Mimaki JV2 / JV22 / TX2-1600 / JV3 / JV4 / JV400-160LX /JV400-160SUV / TS3-1600  Epson SureColor SC-S30600 / SureColor SC-S70600 (8C) / SureColor SC- S50600 (4C) / SureColor SC-S70600 (10C) / SureColor SC- S50600 (5C)  Seiko Colorpainter 64S / Colorpainter V-64S / Colorpainter W-64S HP Designjet 9000 If your printer is other 64 inch wide format printers, please contact us before placing the order. The square, round tube through the power head (pictured above), according to the direction of the arrow from the locking bracket fastening ring to wear, with 2.5# respectively M5 inner six angle wrench set screw locking, square tube. Quality Report:  

Auto Media Take up System and Dryer >>

$154.77/set

Ships to United States

Details >>

US Stock Handheld Portable Metal Letter Bender Rapid Bending Tools Shaping Pliers Width 3.9"(100mm)

US Stock Handheld Portable Metal Letter Bender Rapid Bending Tools Shaping Pliers Width 3.9"(100mm)

Item Code: CS-MLB-SP-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Handheld Portable Metal Letter Bender Rapid Bending Tools Shaping

Channel Letter Making Tools >>

$38.76/set

Ships to United States

Details >>

Canada Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

Canada Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

Item Code: FMJ-1600-H-WARM-CA

This 63" Full - auto Wide Format Roll Heat Assisted Laminator with Stand can be widely used for pre - masking vinyl graphic, mount prints on substrate, over laminating inkjet prints and so on. The warm laminator is used to after printing. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc. Features: High End Full auto Warm assist laminator, heat up to 60℃, high speed, take up liner paper automatically ;  One side roller up by hand crank. Roll to roll ; With Side Trimmer installed;  Easy operation by one person; Foot switch for hands free operation;  ABS tooling side cover,more attractive.  Specification: Max. Working Width: 1600mm (63in) Variable Working Speed: 0-9m/min Max. Nip Opening: 35mm (1.378in) Working Temp.: 0-40℃ Alarm Temp.: 80℃ Roller Diameter: 120mm (4.72in) Top Roller Material: Silicone rubber Bottom Roller Material: Natural rubber Drive Motor: AC110V 230V/90W Power Consumption: 1300W Power Requirement: AC110V/50-60Hz Machine Size: 2020mm x 630mm x 1260mm (79.5in x 24.8in x 49.6in) Packing Size: 2050mm x 770mm x 1450mm (80.7in x 30.3in x 57in) Neight Weight: 312KG (686.4lbs) Gross Weight: 400KG (880lbs) Details:

Qomolangma Laminators >>

$5,302.00 - 5,302.00/set

Ships to United States

Details >>

Brazil Stock, 51" x 35" 1390 Luxury Laser Engraving and Cutter, with EFR F4 100W-130W Laser Tube

Brazil Stock, 51" x 35" 1390 Luxury Laser Engraving and Cutter, with EFR F4 100W-130W Laser Tube

Item Code: LCM-BY-Z1390-100W-BR

Main Configuration: Max. Working Area: 51" x 35" (1300mm x 900mm) Max. Cutting Speed: 15.7" (400mm) / s Max. Engraving Speed: 23.6" (600mm) / s Laser Power: EFR F4 CO2 glass laser tube 100W-130W (Normal lifespan: about 10000 working hours) Max. Cutting Thickness (Acrylic): ≤1.2" (30mm) Resolution Ratio: 0.0064mm Min. Shaping Character: Chinese Character: 0.1"  x  0.1" (2mm x 2mm), letter: 1mm x 1mm Location Precision: <0.01mm Power Supply: AC110V±10%,60HZ; AC220V±10%, 50HZ Gross Power: <1250W Electric Lifting Worktable(Optional) Control Panel Honey Comb Table(Optional) Laser Head Linear Guide Rotary Fixture(Optional) Instructions of Laser Engraving Cutting Software There are three kinds of RD laser cutting software. One is the direct output software based on CorelDraw (hereinafter referred to as CorelDraw_Laser); the other is based on the direct output software based on AutoCAD (hereinafter referred to as AutoCAD_Laser). In addition, there is another kind of independent software (hereinafter referred to as LaserWork), which is more simple to use in the first stage of using laser cutting machines. Why buy from us? Best quality control system in low power laser industry! Parts quality guaranteed The main board and power supply of laser cutting machine were put into an oven at temperature of 50 degree for an aging test, minimally 4 hours. Laser head Enclosed, with air blowing device, which is safer than unclosed head. Laser Test Each laser tube and its power source shall be tested for 8 hours on/off power test: There are strict inspection criterions for its light beam quality and laser power. Guide rail High precision equilibrium linear guide rail imported from Korea. Each guide rail shall be tested before installation. 100% Check of Materials We perform 100% check to all the parts of laser cutting machine in order to avoid any disqualified parts coming into the next step of work. Inspection Before Delivery Any laser cutting machine before departing the factory, we will perform cutting test with the cutting precision at 0.1mm to test its verticality and dimensional deviation. Test of Main Board & Power Supply Put the main board and power supply of laser cutting machine into an oven at temperature of 50 degree for an aging test, minimally 4 hours. Test of Transmission Parts Check the synchronizing wheel and bearing of the laser engraver whether are concentric and easy in rotation as well as its deviation whether is less or equal to 0.02mm. Processing Crotrol During the production of laser engraving machines, our quality inspector will patrol and check its installation quality. It is mainly to check the parts of mechanics and electrics, cables whether satisfy the requirements of installation blueprint. If any error or problem found, the correction treatment will be executed immediately. Test of Guideway and Rectangular Tube Mainly to test the flatness, linearity and torsion resistance of t the guideway and rectangular tube. Put the rectangular tube and the guideway onto a marble platform, then use dial gage calibrator to check: the tolerance bigger than 0.05mm/m is disqualified. Stretching Force Tester for the Belt of Laser Cutting Machine Ensure the machine platform cutting in consistency. Collimator Test The test method for the linearity, flatness and verticality of the laser cutting machine’s guideway is to use Auto Pricise Collimator 1401 Double-way. Handy Power Indicator of Laser Cutting Machine Any point of the laser cutting machine’s power test, ensure the laser cutting machine to give best cutting effect. Electromagnetic Oscillograph of Laser Cutting Machine To test the electromagnetic interference and ensure the running stability of laser cutting machine. Product Highlights: – 51" x 35" (1300mm x 900mm) working area – Up to 23.6" IPS (600mm/s) high working speed – Pass-through front and rear doors to accommodate long work pieces Three unique protection functions, i.e. anti-interference function, water-protective function and power cut-off function ensure longer working life, safety and effectiveness.  – Laminated Safety Glass, glass viewing windows creating a safe enclosure for laser processing.  – Adopt the super fine cutting technology, which has features of extensive material processing, smooth cutting edge and burr-free, avoid polishing, processing high speed, high precision. – Original Singapore imported lens with molybdenum base, making the equipment produce smaller facula and stronger cutting force, greatly improving working efficiency and reducing cost.  – Exhausting, absorbing and assistant blowing systems solve the problem that troubles the laser equipments manufacturing industry for years, extending the life of the laser tube.  – The laser cutter is equipped with aluminum strip shape platform, which can bear heavier materials, such as organic glass, wood and much more. – This machine uses USB port to transmit data, it is equipped with large internal memory capacity, improving the working speed with greater efficiency. – LCM-BY-Z1309 laser cutting machine, adopts high quality CO2 glass laser tube made in China, with a fine cutting effect and price advantage. – Equipped with high quality water chiller CW5000, which can prolong the lifespan of the laser tube and ensures a better engraving effect. Please download the PDF file of User Manual of LCM-BY-Z Series Laser machine to learn more! I.Machine Installation Include: Laser tube assembly; Water chiller installation; Air pump connection; Exhaust fan installation; Grounding wire connection. II. Software and USB driver Installation  III. Software Operation Edit the images in the engraving software or input the color pictures into the engraving software, edit it, and then set the processing parameters, output images to our laser cutting machine, finish the work. IV. Finished works! Customer Case: Comment: I am dealing with printing and carving business, three months ago, we purchased a set 1300*900mm laser cutting machine, finally we received this machine on October, my technician help install this machine, it works well and it has enough power to cut material, we are satisfied with this machine, thanks for your good service, I will go on our business in future. Quality  report:    

CO2 Laser Engraver and Cutter >>

$8,538.00 - 9,181.00/set

Ships to United States

Details >>

US Stock 54" x 50yd Roll Glossy Cold Laminating Film (Monomeric 3.15 mil, Japan Mirror Liner)

US Stock 54" x 50yd Roll Glossy Cold Laminating Film (Monomeric 3.15 mil, Japan Mirror Liner)

Item Code: BS-YL-G110-54-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/28225/54_quot_x_50yd_roll_glossy_cold_laminating_film

Cold Laminating Films >>

$177.30/roll

Ships to United States

Details >>

Australia Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

Australia Stock, Qomolangma 63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover

Item Code: FMJ-1600-H-WARM-AU

Click Here to Order: www.sign-in-china.com/products/21563/Qomolangma_63 quot_high_end_warm_assist_laminator_single piece_metal construction_with entire_abs_tooling_cover.html This 63" Full - auto Wide Format Roll Heat Assisted Laminator with Stand can be widely used for pre - masking vinyl graphic

Qomolangma Laminators >>

$5,286.00 - 5,286.00/set

Ships to United States

Details >>

US Stock 5 pcs 5.9" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder

US Stock 5 pcs 5.9" Vinyl Roll Clamp Clip Film Coil Hoop Storage Tool Film Holder

Item Code: CS-MOC-15-5P-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/26889/5_9_quot vinyl_roll_clamp_clip_film_coil_hoop

Vinyl Finishing & Storaging Tools >>

$6.81 - 7.17/pack

Ships to United States

Details >>

US Stock, 8ft Tension Fabric Pop Up Display Backdrop Stand Trade Show Exhibition Booth and Walls (Frame Only)

US Stock, 8ft Tension Fabric Pop Up Display Backdrop Stand Trade Show Exhibition Booth and Walls (Frame Only)

Item Code: SIC-09D-T-33F-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/27725/8ft_tension_fabric_pop_up_display

Pop Up Displays >>

$185.95 - 195.74/pc

Ships to United States

Details >>

US Stock, HIX S450 Digital Auto Open Clamshell Heat Press with 15"x 15" Platen and Splitter Stand

US Stock, HIX S450 Digital Auto Open Clamshell Heat Press with 15"x 15" Platen and Splitter Stand

Item Code: HTM-HIX-S450-US

Description: Close the lid and walk away. Set up another job, or grab a soda. With the HIX S-450 Auto Release Heat Transfer machine, you have worry-free operation. When the job is finished, the clamshell lid pops open and stops the heat transfer process – but the upper platen stays hot and set to your pre-set temperature. It’s ready to work when you are! Hands-free opening saves time and effort, allowing the operator to apply more transfers in a shift with less effort than a traditional heat transfer press. Direct-To-Garment applications are also a large driving force in the success of the auto-open feature. This allows you the freedom of loading your printer while the last print is curing, eliminating any risk of scorching or compromising transfer quality due to overheating. The HIX S-450 utilizes an exclusive electronically activated mechanical latch release mechanism with a gas shock assist to help enhance and support your operations. No compressor required. Free operation, reduce fatigue, and increase productivity – all with one press. The easy-to-use open and close handle has spring assist and a full range pressure adjustment. It also provides even pressure on thicker items while adding 20% more pressure over straight handle designs. Quality driven at every point, the HIX S-450 is built to be rugged and durable for years of reliable service. Every heat casting at HIX is manufactured in a permanent steel cavity mold using HIX-exclusive aluminum alloy for maximum heat transfer. The HIX S-450 has a 15″ x 15″ heat platen that can apply all types of transfers on items up to 1″ thick. The floating lower platen helps provide even pressure on thicker items, no matter were it’s applied. HIX presses provide completely even pressure from edge to edge, even at high temps. The S-450 features a touch-screen controller with digital time that is adjustable up to 999 seconds. It shows a time countdown on readout, beeps after elapsed time, and resets when the handle is raised. The calibrated digital temperature control is adjustable up to 450°F (232°C) and displays the current temperature. The S-450 sets the standard in the auto release heat press industry because of its ruggedness, quality construction, and years of trouble-free performance. If you’re looking for high production capabilities, this is the heat press you need! Features: • Easy integrated digital time and temperature settings – Touch-screen controller allows simple dialing in of time and temperature.From the touch-screen controller, preset selections of temperature-time combinations can be easily programmed into the machine. • The current pressure is displayed on the touch-screen display each time the press closes. The pressure is easily changed with the black pressure dial on the face of the control housing (clockwise for more, counter-clockwise for less). There are nine settings: 0-3 for light pressure, 4-6 for medium, and 7-9 for heavy. This is a great feature if you need to press a lot of different thicknesses. • Tilting (floating) lower platen – The bottom platen tilts up toward the upper platen as the heat press closes. This equalizes pressure even when pressing thick items, like a quarter-inch thick 8×10” ceramic tile. • Top Pressure Plate – The handle attaches to a 4″x5″ pressure plate on the top platen instead of a single screw going into the top platen. This provides more even pressure on the outside edges of the press (think of it as pushing down with your entire hand, versus just your thumb). • Certified electrically safe (ETL) – The “Electrical Testing Laboratory” seal means HIX presses have passed a rigid and very demanding independent testing process, and have been certified electrically safe. • 100% Made in the USA – HIX has its own 110,000 sq ft manufacturing facility with its very own fully integrated aluminum foundry, CNC mill operation, welding, metal forming, wiring, fabrication, assembly, and packaging departments. • A one-year general warranty and lifetime warranty on the heater element. • Heat Platen Size: 15” x 15” (38 x 38 cm) • Voltage: 120V Packing Details: • Dimensions: W 21” x H 23” x D 33” • Weight Shipping: 85 lbs(38.5kg)

T-shirt Heat Presses >>

$1,927.00/set

Ships to United States

Details >>

US Stock 54in Automatic Media Take up Reel SD54 Two Motors for Mutoh / Mimaki / Roland / Epson Printer(Local Pick-Up)

US Stock 54in Automatic Media Take up Reel SD54 Two Motors for Mutoh / Mimaki / Roland / Epson Printer(Local Pick-Up)

Item Code: SZQ-SH-SD54-PKU-US

The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: /products/17197/54 quot automatic media take_up_reel sd54 two motors for mutoh mimaki roland epson printer.html The Media Take Up SD54 is a convenient and easy-to-use

Auto Media Take up System and Dryer >>

$201.42 - 212.02/set

Ships to United States

Details >>

US Stock,QOMOLANGMA 110mm (4.3") x 50m (164ft) Black Color Aluminum Trim Cap with PC & Foam (Channelume)

US Stock,QOMOLANGMA 110mm (4.3") x 50m (164ft) Black Color Aluminum Trim Cap with PC & Foam (Channelume)

Item Code: CS-TLTY3-11-BK-US

The Products in US Stock Only Free Shipping to USA,  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/22463/110mm_4_3_quot_x_50m_164ft_color_aluminum_trim_cap

Channel Letter Coil >>

$96.79 - 120.99/roll

Ships to United States

Details >>

US Stock - 10ft High Quality Portable Tension Fabric Exhibition Stand Backdrop Advertising Wall Banner (Graphic Included/Single Sided)

US Stock - 10ft High Quality Portable Tension Fabric Exhibition Stand Backdrop Advertising Wall Banner (Graphic Included/Single Sided)

Item Code: SIC-BLVM-ST-E17U24-IS-US

The Products in US Stock Only Free Shipping to USA.  Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/27302/10ft high_quality_portable_tension_fabric exhibition

Fabric Tension Displays >>

$446.00 - 470.00/pc

Ships to United States

Details >>

Subscribe to our special offers:
Follow us: 'like' us on Facebook 'Fallow us on Youtube