Cart 
Order Tracking
60"(1.52m*200m) 21Mic PET Thermal Laminatoin Film (Glossy), 1" Core
Item Code: CS-PET-YK1520-24
Specification: Thickness: 21 mic Base: PET Adhesive: EVA Width(mm): 1520 Length(m): 200 Paper core: 1 inch Temperature: Normal:95~105℃ Roller pressure: 10-20Mpa Speed: 8-20 m/min Advantage: • Environmental friendly: non-hazardous to health and safe to use as no toxic gases or
Ships to United States
10pcs Connector for LED Strip 8mm or 10mm; 1 Clip + 1 Cable 15cm
Item Code: LED-BLT-05
8mm or 10mm Single colour LED strip power connector with 15cm cable (pack of 10) Single colour LED strip solderless power connector for 8mm or 10mm strips with 15cm cable (pack of 10) This connector is used to power up single colour LED strips without any soldering to be required. The LED strip light must be 8mm or 10mm wide in order to use this connector. In order to use that with IP rated LED strips, waterproof coating (resin) must be removed from the end of both LED strips. You can use on the top of the connection heat shrinkable tubing to maintain IP rating. Please ensure connector clips are aligned with the copper contacts of the LED Strip and notice the polarity. If connecting IP rated strips remove any gel coating from copper contacts completely. In some cases might be required to move the LED forward or backwards in order for connector contacts to be aligned properly. Then insert strip in the slot and before closing the connector cover ensure the teeth clamps will hold the circuit board of LED strip in place. If an LED chip is located near by the copper connection contacts of the strip the cover might not be able to close and you may try in such a case to use the other end of your LED strip and install the connector upside down in order to match the polarity. We do suggest using this connector for powering up to 5m of LED strip. To power longer runs a soldered connection is suggested. We still suggest soldering but those connectors are best available in the market today. After lots of testing they are the only ones that are approved to be used but still not the perfect solution.
Ships to United States
1.5KW Laser Welding Machine With 4 in 1 Suplaser Wobble Gun With Auto Feeder FDA
Item Code: LWM-CY-FL1500
heat dissipation area, good beam quality, and small size. It has obvious advantages compared with the bulky gas laser and solid laser, and has gradually developed into Important candidate in the fields of precision laser processing, lidar systems, space technology, laser medicine, etc. Feature: 1
Ships to United States
10pcs Connector for RGB LED Strip 8mm or 10mm; 1 Clip + 1 Cable 15cm
Item Code: LED-BLT-06
8mm or 10mm RGB colour LED strip power connector with 15cm cable (pack of 10) RGB colour LED strip solderless power connector for 8mm or 10mm strips with 15cm cable (pack of 10) This connector is used to power up RGB colour LED strips without any soldering to be required. The LED strip light must be 8mm or 10mm wide in order to use this connector. In order to use that with IP rated LED strips, waterproof coating (resin) must be removed from the end of both LED strips. You can use on the top of the connection heat shrinkable tubing to maintain IP rating. Please ensure connector clips are aligned with the copper contacts of the LED Strip and notice the polarity. If connecting IP rated strips remove any gel coating from copper contacts completely. In some cases might be required to move the LED forward or backwards in order for connector contacts to be aligned properly. Then insert strip in the slot and before closing the connector cover ensure the teeth clamps will hold the circuit board of LED strip in place. If an LED chip is located near by the copper connection contacts of the strip the cover might not be able to close and you may try in such a case to use the other end of your LED strip and install the connector upside down in order to match the polarity. We do suggest using this connector for powering up to 5m of LED strip. To power longer runs a soldered connection is suggested. We still suggest soldering but those connectors are best available in the market today. After lots of testing they are the only ones that are approved to be used but still not the perfect solution.
Ships to United States
13Pcs Torx Star Bit Socket Set 1/2inch 3/8inch 1/4inch Drive
Item Code: SIC-YY-W10798648
Set 1 x Plastic Case Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 1-2 cm differences due to manual measurement.
Ships to United States
SMD 2835 IP67 Waterproof LED Module (3LEDs, 1.08W, L74.1.x W16 x H11mm)
Item Code: LEDM-MNS-M23GW11D
Features: 1. Uniform and efficient illumination at high LED module distance thanks to new excellent lens design. 2. New technology to get high efficiency. 3. 5 Years warranty. 4. 160 lm/w Areas of application - Signage and illuminated advertising. - Backlighting of channel letters and light box
Ships to United States
1.5KW Portable Handheld Laser Welding Machine Laser Cut Rusty Remove 4-in-1 Air Cool
Item Code: LWM-CY-FL1500M
Features: 1. 4 in 1 with Super cost-effective; 2. 0.7kg smallest size welding torch; 3. Drop-protected covered with industry plastic; 4. Sturdy wire feeding attachment; 5. Multi-functions: Laser Welding is the main function with side functions of Laser Rust removal and Laser Cutting; 6. 2 - 4
Ships to United States
3D Sublimation Silicone Mug Wrap 11OZ Cup Clamp Fixture for Printing Mugs
Item Code: CS-3D11M
sublimation. Package included: 1 x Cup Clamp Used for: 3D 11oz mugs sublimation printing
Ships to United States
CALCA 81gsm 64in x328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core
Item Code: STP-P810A-64
;Stored in an airtight environment with air humidity 40～50% ·Before usage, it is recommended to keep it for one day in the printing environment. Recommendations: 1. The product packaging has been well treated from moisture, but it is recommended to keep it in a dry place before used. 2. Before
Ships to United States
US Stock, CALCA 81gsm 63in x328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core
Item Code: STP-P810A-63-US
% RH. Printing Tips: The product packaging has been well treated from moisture, but in order to the product can reach a balance with the environment, you'd better to open the material to adapt the indoor print environment at least 24 hours before usage, and the environment is best controlled between
Ships to United States
CALCA 81gsm 44in x 328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core
Item Code: STP-P810A-44
;Stored in an airtight environment with air humidity 40～50% ·Before usage, it is recommended to keep it for one day in the printing environment. Recommendations: 1 . The product packaging has been well treated from moisture, but it is recommended to keep it in a dry place before used. 2. Before
Ships to United States
CALCA 81gsm 63in x328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core
Item Code: STP-P810A-63
CALCA 81gsm 63in x328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core An economical, CALCA 81 gsm water-based sublimation transfer paper with high ink transferability producing fast-dry, full-color graphics, ideal for high speed print and transfer onto a wide range of flexible
Ships to United States
US Stock, CALCA 81gsm 64in x328ft Textile Dye Sublimation Paper for Heat Transfer Printing, 3in Core
Item Code: STP-P810A-64-US
Condition: ·Storage life: three years ·Perfect packing ·Stored in an airtight environment with air humidity 40～50% ·Before usage, it is recommended to keep it for one day in the printing environment. Recommendations: 1. The product packaging has been well treated from moisture
Ships to United States
CALCA 60pcs/Pack 750ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-750-60PC
Specifications: • Capacity: 750ml • Material: Aluminum • Color: White • Quantity: 60pcs / carton • Net Weight: 10kgs / carton • Shipping Weight: 22kgs / carton • Dimension: 79cm x 48cm x 28cm / carton • Suitable for thermal transfer personal photo, picture, company logo etc. • Each bottle comes in one individual white box. Application: Suggested Transfer Instructions:
Ships to United States
12pcs 3D Sublimation Silicone Mug Wrap 11OZ Cup Clamp Fixture for Printing Mugs
Item Code: CS-3D11M-12P
Main Material: Heat-resistant silicon and metal Main Color: Green Size: 240 X 110mm Weight: 84g Package: 12pcs/parcel Used for: 3D 11oz mugs sublimation printing
Ships to United States
CALCA 60pcs/Pack 500ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-500-60PC
Specifications: • Capacity: 500ml • Material: Aluminum • Color: White • Quantity: 60pcs/carton • Weight: 6.5kgs / carton • Dimension: 79cm x 41cm x 23cm / carton • Suitable for thermal transfer personal photo, picture, company logo etc. • Each bottle comes in one individual white box. Details: Application:
Ships to United States
US Stock, CALCA 60pcs/Pack 500ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-500-US-60PC
sublimation printing white.html Specifications: • Capacity: 500ml • Material: Aluminum • Color: White • Quantity: 60pcs/carton • Weight: 6.5kgs / carton • Dimension: 79cm x 41cm x 23cm / carton • Suitable for thermal transfer personal photo, picture, company logo
Ships to United States
US Stock, CALCA 60pcs/Pack 750ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-750-US-60PC
sublimation printing white.html Specifications: • Capacity: 750ml • Material: Aluminum • Color: White • Quantity: 60pcs / carton • Net Weight: 10kgs / carton • Shipping Weight: 22kgs / carton • Dimension: 79cm x 48cm x 28cm / carton • Suitable for thermal
Ships to United States
US Stock, 60pcs/Pack 750ml Blank Aluminum Sports Bottle for Sublimation Printing, White (Local Pick-Up)
Item Code: CS-MK-LH-750-PKU-US-60PC
The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: /products/27470/60pcs pack 750ml blank_aluminum sports bottle for sublimation printing white.html Specifications: • Capacity: 750ml • Material: Aluminum &bull
Ships to United States
CALCA 10pcs/Pack 500ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-500-A10P
Specifications: • Capacity: 500ml • Material: Aluminum • Color: White • Quantity: 10pcs / carton • Weight: 2kgs / carton • Dimension: 43cm x 21cm x 32cm /carton • Suitable for thermal transfer personal photo, picture, company logo etc. • Each bottle comes in one individual white box. Application:
Ships to United States
CALCA 10pcs/Pack 750ml Blank Aluminum Sports Bottle for Sublimation Printing, White
Item Code: CS-MK-LH-750-A10P
Specifications: • Capacity: 750ml • Material: Aluminum • Color: White • Quantity: 10pcs / carton • Weight: 2kgs / carton • Dimension: 43cm x 21cm x 32cm /carton • Suitable for thermal transfer personal photo, picture, company logo etc. • Each bottle comes in one individual white box. Application:
Ships to United States
Sublimation Mugs Blank White Coated Mugs B Grade 11OZ For Heat Press Printing With Box
Item Code: HTC-SKB01-B
Description: Sublimation Mugs Blank White Coated Mugs B Grade 11OZ For Heat Press Printing With Box Quality: B Grade Material: Ceramic Size: ᴓ8.2 × 9.5cm Color: White Package: 36pcs/carton This 11oz sublimation blank white mug is white coated surface and it’s smooth and bright. The
Ships to United States
8.2 ft Teardrop Banner with Spike Base (Single Sided Printing)
Item Code: SIC-FB-ST-1
composite fiber poles, superb flexibility to prevent breaking. • Ground spike - for use on grass or earth. • Flag pole is lightweight .Simple handling, no tools required. Includes: Spike base, Poles, Single sided graphic printing, Carry bag. Note: Graphic artwork and printing idea are
Ships to United States
