Supply roland encoder strip sp-540 at wholesalepirce - $19.93

5-24V T1000S SD Card LED Pixel Controller WS2812B 6803 WS2811 RGB LED Strip

Item Code: LEDKQC-YXGH-F

Feature: Input voltage: 5V-24V Dimensions: 6.30 in x 2.95 in x 0.91 in (16.0 cm x 7.5 cm x 2.3 cm) Weight: 230g Number of programs: 16 MAX MAX number of pixels: 2048 Compatible with single line or double line chips. 32-256 Gray, Support software Gamma correction. Support the rules and special-shaped handle. Single-port output, can support 2048 lights. Off-line(SD Card) control, play back content stored in the SD card. T-1000S store a maximum of 16 programs, copy multiple files to the SD card in order after formatting the SD card as "FAT" format. The program must be named in orders . Ex. : 00_1.led, 01_1.led, 02_1.led. Support Chips Chip type Software code& Lamps/(MAX) Note Controller type LPD6803,D705,1101,6909,6912 T-1000-6803 2048 pixels LPD8806,LPD8809 T-1000-8806 2048 pixels TM1803,TM1804,TM1809,TM1812 T-1000-TM 2048 pixels TM1804 and TM1809 are divided into high and low TM1903，TM1904，TM1909，TM1912 T-1000-TM19 2048 pixels UCS6909，UCS6912，UCS7009，UCS5903 T-1000-UCS-32 2048 pixels UCS1903，UCS1909，UCS1912 T-1000-UCS-256 2048 pixels 1903 and 1909 are divided into high and low UCS3903 T-1000-UCS-1024 2048 pixels DMX512 T-1000-DMX 170/512 pixels Compatible with standard DMX512 WS2801,WS2803 T-1000-WS 2048 pixels WS2811 T-1000-WS2811 2048 pixels WS2811 be divided into high and low DS189 T-1000-DS189 2048 pixels TLS3001,TLS3002，TLS3008 T-1000-TLS * pixels P9813 T-1000-P9813 2048 pixels SM16715 T-1000-SM16715 2048 pixels SM16715 be divided into high and low SM16716 T-1000-SM16716 2048 pixels BS0901,BS0902 T-1000-0901 2048 pixels BS0815 T-1000-0815 2048 pixels NOTE: When T1000S controller load less than 512 pixels the frame rate can reach 30fps. When T-1000s control more than 512 pixels the frame rate will slow down automatically. Trouble Shooting: Question 1: After power, the T-1000S ERROR indicator has been flashing without display output Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems: ①SD card is empty, with no effect file. ②The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led. ③SD card did not format to FAT before copy effect files. ④Please check the supply power voltage, the controller can be individually powered to exclude power reasons ⑤Changing the SD card and then test to exclude the possibility of a bad SD card Question 2: The controller is powered on, the indicator is normal, but the lamps have no effect change Answer: The reasons for this are as follows: ① Check if the lighting′s signal line and the controller connected correctly ② If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together ③ Check if the model chose during making display files on the SD card match the chips used in the lighting Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan

LED Controller & LED Dimmers >>

$17.14 - 19.93/set

Ships to United States

Item Code: LEDKQC-YXGH-F

Item Code: LEDK-YXGH-44KEY-24A

Item Code: CS-PCUT-CGS1200

Item Code: CS-PCUT-CGS630

Item Code: LEDK-YXGH-20KEY-C

Item Code: LED-BLT-10

Item Code: CS-COP-CGS04

Item Code: LED-BLT-09

Item Code: CS-GR-CGS03

Item Code: CS-MG-002-PD

Item Code: LED-BLT-05

Item Code: CS-COP-CGS05

Item Code: LEDKT-YXGH-TR

Item Code: LED-BLT-07

Item Code: LED-JX-NEON-ACC-CH05

Item Code: LED-BLT-03

Item Code: CS-PCUT-CGS900

Item Code: LEDS-CM-5050-12V30F68

Item Code: CS-GR-CGS05

Item Code: CS-GR-CGS06

Item Code: CS-COP-CGS02

Item Code: LED-BLT-01

Item Code: LED-BLT-02

Item Code: LED-CM-5730-RGB12V30IP66