Cart 
Order Tracking
36" W x 30" T Countertop Safety Barrier Acrylic Sneeze Guard
Item Code: CS-EB-ASG01-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. 36" W x 30" T Countertop Safety Barrier Acrylic Sneeze Guard How to solve the problems of enterprise resumption
Ships to United States
30" W x 30" T Countertop Safety Barrier Acrylic Sneeze Guard
Item Code: CS-EB-ASG03-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. 30" W x 30" T Countertop Safety Barrier Acrylic Sneeze Guard How to solve the problems of enterprise resumption
Ships to United States
Generic 220ml One-time Roland Eco-UV 4 Ink Cartridge Chip,W
Item Code: ACC-ROL-540
Generic 220ml One-time Roland Eco-UV 4 Ink Cartridge Chip,W
Ships to United States
16oz/500ml Sublimation Blanks Frosted Gradient Mason Jar w/ Lantern Lid and Hemp Rope Handle
Item Code: SUB-LAT-MASR-16OZ-36PC
Our stunning sublimation gradient color mason jars lanterns come with solar-powered lids, which can be recharged automatically during daytime and make the lights inside shine in the dark! The frosted finish makes the lights more gentle and creates a lovely cozy ambience! Print your designs on these beautiful mason jar starlight-like lanterns, then you can put them on the floor, stairs, your dining table and night table to warm up your room or celebrate for holidays, hang them up to decorate your balcony, garden, patio and yard, or grab them out to brighten up the campsite! Specifications: Brand: CALCA Material: Glass, and copper wire lamp Capacity: 16oz. (500ml) Mug Size: H 5.4in (13.6cm), Φ 3.15in (8cm) Lid Size: Φ2.8in (7cm) Available Colors: Dark Blue, Light Blue, Green, Pink, Rose Red, Yellow, Mixed (6 x Dark Blue, 6 x Light Blue, 6 x Green, 6 x Pink, 6 x Rose Red, 6 x Yellow) Finish: Frosted Gradient Print Applications: Dye-Sublimation Package: 36pcs/ctn Packing Size: 19.7in x 13.4in x 13.4in (500mm x 340mm x 340mm)/ctn Gross Weight: 35.2lbs (16kgs)/ctn Usages: Note: For best results we highly recommend pre pressing the jar for 10-15 seconds. Temperature and time settings are only a guide, please test in your press machine for accurate time and temperature. Use a Mug Press Referential Press Temprature: 356°F (180℃) Time: 80 Seconds Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the mason jar with thermal tape. Place mason jar in press at the press temperature, and close the element around the jar. Press for the specified time above needed using specified pressure. If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds. Once done, remove the jar from the press and remove the transfer paper immediately. Allow the jar to cool completely before use. Warm Tips: 1. Please allow 0.5-1cm (0.2in - 0.4in) tolerance due to manual measurement. 2. In order to make the glass jar cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. 3. The color may exist slight difference due to different screen display. 4. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry. 5. For use with a mug press, Oven is not recommended
Ships to United States
6pcs 16oz/500ml Sublimation Blanks Frosted Gradient Mason Jar w/ Lantern Lid and Hemp Rope Handle
Item Code: SUB-LAT-MASR-16OZ-6PC
Our stunning sublimation gradient color mason jars lanterns come with solar-powered lids, which can be recharged automatically during daytime and make the lights inside shine in the dark! The frosted finish makes the lights more gentle and creates a lovely cozy ambience! Print your designs on these beautiful mason jar starlight-like lanterns, then you can put them on the floor, stairs, your dining table and night table to warm up your room or celebrate for holidays, hang them up to decorate your balcony, garden, patio and yard, or grab them out to brighten up the campsite! Specifications: Brand: CALCA Material: Glass, and copper wire lamp Capacity: 16oz. (500ml) Mug Size: H 5.4in (13.6cm), Φ 3.15in (8cm) Lid Size: Φ2.8in (7cm) Available Colors: Dark Blue, Light Blue, Green, Pink, Rose Red, Yellow, Mixed(1 x Dark Blue, 1 x Light Blue, 1 x Green, 1 x Pink, 1 x Rose Red, 1 x Yellow) Finish: Frosted Gradient Print Applications: Dye-Sublimation Package: 6pcs/ctn Packing Size: 6.7in x 13.4in x 6.7in (170mm x 340mm x 170mm)/ctn Gross Weight: 6.6lbs (3kgs)/ctn Usages: Note: For best results we highly recommend pre pressing the jar for 10-15 seconds. Temperature and time settings are only a guide, please test in your press machine for accurate time and temperature. Use a Mug Press Referential Press Temprature: 356°F (180℃) Time: 80 Seconds Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the mason jar with thermal tape. Place mason jar in press at the press temperature, and close the element around the jar. Press for the specified time above needed using specified pressure. If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds. Once done, remove the jar from the press and remove the transfer paper immediately. Allow the jar to cool completely before use. Warm Tips: 1. Please allow 0.5-1cm (0.2in - 0.4in) tolerance due to manual measurement. 2. In order to make the glass jar cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. 3. The color may exist slight difference due to different screen display. 4. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry. 5. For use with a mug press, Oven is not recommended
Ships to United States
16oz/500ml Sublimation Blanks Frosted Gradient Mason Jar w/ LED Waterproof Solar Lid and Metal Handle
Item Code: SUB-LAT-MASM-16OZ-36PC
Our stunning sublimation gradient color mason jars lanterns come with LED Waterproof Solar Lid, which can be recharged automatically during daytime and make the lights inside shine in the dark! The frosted finish makes the lights more gentle and creates a lovely cozy ambience! Print your designs on these beautiful mason jar starlight-like lanterns, then you can put them on the floor, stairs, your dining table and night table to warm up your room or celebrate for holidays, hang them up to decorate your balcony, garden, patio and yard, or grab them out to brighten up the campsite! Specifications: Brand: CALCA Material: Glass, and copper wire lamp Capacity: 16oz. (500ml) Mug Size: H 5.4in (13.6cm), Φ 3.15in (8cm) Lid Size: Φ2.8in (7cm) Available Colors: Orange, Light Blue, Green, Purple, Rose Red, Yellow Mixed(6 x Orange, 6 x Light Blue, 6 x Green, 6 x Purple, 6 x Rose Red, 6 x Yellow) Finish: Frosted Gradient Print Applications: Dye-Sublimation Package: 36pcs/ctn Packing Size: 19.7in x 13.4in x 13.4in (500mm x 340mm x 340mm)/ctn Gross Weight: 35.2lbs (16kgs)/ctn Usages: Note: For best results we highly recommend pre pressing the jar for 10-15 seconds. Temperature and time settings are only a guide, please test in your press machine for accurate time and temperature. Use a Mug Press Referential Press Temprature: 356°F (180℃) Time: 80 Seconds Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the mason jar with thermal tape. Place mason jar in press at the press temperature, and close the element around the jar. Press for the specified time above needed using specified pressure. If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds. Once done, remove the jar from the press and remove the transfer paper immediately. Allow the jar to cool completely before use. Warm Tips: 1. Please allow 0.5-1cm (0.2in - 0.4in) tolerance due to manual measurement. 2. In order to make the glass jar cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. 3. The color may exist slight difference due to different screen display. 4. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry. 5. For use with a mug press, Oven is not recommended
Ships to United States
Generic One-time Chip for Mimaki PHT50 Cartridge 5 Colors (C,M,Y,K,W)
Item Code: ACC-MIM-479
Generic One-time Chip for Mimaki PHT50 Cartridge 5 Colors (C,M,Y,K,W) Printer compatibility: Mimaki TxF150-75 / TxF300-75 Volume: 600ml for C M Y K, 500ml for W Manufacturer: Ving Parts
Ships to United States
S&A CW-5000TG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 220-240V, 50Hz
Item Code: CW-5000TGTY
Description CW-5000DG industrial water chillers have been popular for over 16 years with the annual output of 30,000 units.It is designed for cooling the one CO2 glass laser tube under 120W of the laser engraving and cutting machine. (Its emitting rate is higher than 60%.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features： It is suitable for cooling the laser tube under 120W, and the temperature can be adjusted precisely. You can choose different models according to local voltage and frequency. It can extend the using life of laser tube and ensure the engraving effect better. With completed water flow and over high temperature alarm functions It can control the water temperature, precision is ±0.3℃, which provide stable working conditions for laser devices. Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. CW-5000 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely. Specific disconnection alarm securing protection. Enclosed water tanks, water used for a long time. Equipped with alarm output port, can quickly protect sensitive components. High cost performance, low failure rate. Multiple power specifications; CE approval; REACH approval; RoHS approval. Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. ONTOUR AND PARTS INTRODUCTION Independent production of sheet metal User-friendly control panel The temperature controller offers high precision temperature control of ±0.3°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Dust-proof filter Integrated with the grill of the side panels, easy mounting and removal. Ease of moving and water filling The firm handle can help move the water chillers easily. Ventilation Distance Application Chiller CW-5000 for 120W metal laser cutting machine Water chiller CW-5000 for acrylic co2 laser cutting machine Industrial chiller CW-5000 for laser cutter Air cooled chiller CW-5000 for co2 laser cutting & engraving machine Water cooled chiller CW-5000 for uv laser marking machine CW-5000 chiller for 3w-5w uv laser machine Refrigeration water chiller CW-5000 for laser marking machine Compressor water chiller CW-5000 for UV curing system printer Industrial water chiller CW-5000 for laser marker Certificate Warehouse Test System Installation Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of cooling water additive (anti-corrosion water aqua). Working in cold north area, it’s better to use noncorrosive antifreeze fluid. According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set value, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start over the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. Adjust parameters of temperature controller. CW-5000/5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to page 15, “Operating status and parameters adjustment.” Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Professional use only! The appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction,children being supervised not to play with the appliance! Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place Check and ensure the power interface and the power plug is plugged in place and in good contact. Fuse burnt-out Pull out the fuse box from the power supply interface of the chiller, check the fuse, replace with spare fuse if necessary and check whether the power supply voltage is stable; Check and ensure the power interface and the power plug is plugged in place and in good contact. Flow Alarm (panel red light is on)use a water pipe directly connect to the water outlet and inlet but still without water flowing Water level in the storage water tank is too low Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. Flow Alarm occurs while running with other equipment (panel red light is on),but there is water flowing and no alarm when use a water pipe directly connected to the chiller water outlet and inlet. Water circulation pipes are blocked or a pipe bending deformation. Check water circulation pipe Ultra-high temperature alarm Blocked dust gauze, bad thermolysis Unpick and wash the dust gauze regularly Poor ventilation for air outlet and inlet To ensure a smooth ventilation for air outlet and inlet Voltage is extremely low or astable To improve the power supply circuit or use a voltage regulator Improper parameter settings on thermostat To reset controlling parameters or restore factory settings Switch the power frequently To ensure there is sufficient time for refrigeration (more than 5 minuets) Excessive heat load Reduce the heat load or use other model with larger cooling capacity Alarm for ultra-high room temperature The working ambient temperature is too high for the chiller To improve the ventilation to guarantee that the machine is running under 40℃. Serious problem of condensate water Water temperature is much lower than ambient temperature, with high humidity Increase water temperature or to preserve heat for pipeline Water drains slowly from outfall during water changing Injection port is not open Open the injection port
Ships to United States
S&A CW-5000DG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 110V, 60Hz
Item Code: CW-5000DGTY
It is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This water chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features: • It is suitable for cooling the laser tube under 150W, and the temperature can be adjusted precisely. • You can choose different models according to local voltage and frequency. • It can extend the using life of laser tube and ensure the engraving effect better. • With completed water flow and over high temperature alarm functions • It can control the water temperature, precision is ±0.3℃, which provide stable working conditions for laser devices. • Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; • This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. • CW-5000 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely. • Specific disconnection alarm securing protection. • Enclosed water tanks, water used for a long time. • Equipped with alarm output port, can quickly protect sensitive components. • High cost performance, low failure rate. • Multiple power specifications; CE approval; RoHS approval. Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. User-friendly control panel The temperature controller offers high precision temperature control of ±0.3°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Dust-proof filter Integrated with the grill of the side panels, easy mounting and removal. Ease of moving and water filling The firm handle can help move the water chillers easily. Ventilation Distance Alarm Function’s Description: Flow alarm and output ports: In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5000series chillers possesses an unique low flow alarm protection. The cooling water circulation loop alarm causes and the work of the state table Normal Flow Indicator Flow Alarm Indicator Buzzer Output Ports Hi, H2 Output Ports H1, H3 Circulating pump works properly ON OFF NOT RING DISCONNECTION BREAKOVER Blocked cooling water circulation loop OFF ON RING BREAKOVER DISCONNECTION Alarm of water shortage OFF ON RING BREAKOVER DISCONNECTION Faulted circulating pump OFF ON RING BREAKOVER DISCONNECTION Power interruption / / / BREAKOVER DISCONNECTION Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. Fill the water tank with purified water. Connect the water inlet of the water tank to the water outlet of the laser machine and connect the water outlet of the water tank to the water inlet of the laser machine. Connect the signal line of the water tank with that of the laser machine. Please see pictures below. Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps. A.Open the package to check if the machine is intact and all the necessary accessories are completed. B.Open the injection port to feed cooling water. Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid. C.According to system conditions, please connect the water inlet and outlet pipe well. D.Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. E.Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. F.Adjust parameters of temperature controller. CW-5000 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to “Operating status and parameters adjustment.” Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non – corrosive antifreeze if you are in the northern cold regions. Cautions 1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps). 2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us. 3. To protect the pump, it’s strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! 4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. 5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. 6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Application： CW5000-water-chiller-cool-for-Picosecond-Lasers CW5000-water-chiller-cool-for-UV-laser-marking-machine CW5000-water-chiller-cool-for-Uv-solid-laser CW5000-water-chiller-for-cooling-700W1500W-UV-light-source CW5000-water-chiller-for-cooling-UV-LED-source Industrial-chiller-CW-5000-for-HF-welding-machine Quality Report:
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
0.4~0.9A Machine power 0.07kW Radiating capacity 50W/℃ Pump pressure 1bar Max.flow 10L/min N.W 9Kgs(19.8lb) G.W 11 Kgs(24.3lb) Protection flow alarm Tank capacity 9L Inlet and outlet OD 10mm barbed connector Dimension 49cm x 27cm x 38cm (19.3" x 10.6" x 15"
Ships to United States
CALCA 12in x 328ft (31cm x 100m) UV DTF Transfer Film B Roll Crystal Label Transfer Film, Positioning Film
Item Code: DTF-UV-BR31100
12in x 328ft (0.31m x 100m) UV DTF Transfer Film Crystal Label Film B Easy, fast, low cost and no minimum quantity request make it as one of the new trend of printing technology. The new crystal label AB films printing solution has features of no waste discharge, no glue, high polymer glue, high
Ships to United States
CALCA 12in x 328ft (31cm x 100m) UV DTF Transfer Film B Roll Crystal Label Transfer Film, Positioning Film
Item Code: DTF-UV-BR31100PRO
12in x 328ft (0.31m x 100m) UV DTF Transfer Film Crystal Label Film B Easy, fast, low cost and no minimum quantity request make it as one of the new trend of printing technology. The new crystal label AB films printing solution has features of no waste discharge, no glue, high polymer glue, high
Ships to United States
CALCA CALCA 12in x 164ft (31cm x 50m) UV DTF Transfer Film B Roll Crystal Label Transfer Film, Positioning Film
Item Code: DTF-UV-BR3150
CALCA 12in x 164ft (31cm x 50m) UV DTF Transfer Film Crystal Label Film B Easy, fast, low cost and no minimum quantity request make it as one of the new trend of printing technology. The new crystal label AB films printing solution has features of no waste discharge, no glue, high polymer glue
Ships to United States
CALCA 24in x 328ft (61cm x 100m) UV DTF Transfer Film B Roll Crystal Label Transfer Film, Positioning Film
Item Code: DTF-UV-BR61100
discharge. Specifications: A/B Film For UV Printer Model: UV printing film B Film Type: PET Film Thickness: 0.08mm Package: 0.61*100m / roll Packing Size: 117mm x 117mm x 623mm (4.6in x 4.6in x 24.5in) Gross Weight: 4.35kg (9.6 lbs) Remarks: The B film must be covered with a matte surface and a glue
Ships to United States
CALCA 24in x 328ft (61cm x 100m) UV DTF Transfer Film B Roll Crystal Label Transfer Film, Positioning Film
Item Code: DTF-UV-BR61100PRO
discharge. Specifications: Type: UV transfer film B Film Type: PET Roll Size: 0.615m x 100m (24.3in x 328ft) / roll Packing Size: 155mm x 155mm x 655mm (6.1in x 6.1in x 26in) Gross Weight: 7.14kg (16lbs) Remarks: The B film must be covered with a matte surface and a glue surface. Otherwise, it won't
Ships to United States
Generic Mimaki JV33 / TS3 Panel Board Film
Item Code: ACC-MIM-156
Generic Mimaki JV33 / TS3 Panel Board Film Printer Compatibility: Mimaki JV33 / TS3 Packing Size: 7.9" x 4.7" x 0.79" (200 x 120 x 20mm) Gross Weight: 0.3kg Manufacturer: Ving Parts
Ships to United States
Generic Mutoh VJ-1624 Panel Board Film
Item Code: ACC-WT-214
Generic Mutoh VJ-1624 Panel Board Film Printer Compatibility:Mutoh VJ-1624 Manufacturer:Ving Parts
Ships to United States
Generic Roland RA-640 Panel Board Film
Item Code: ACC-ROL-360
Generic Roland RA-640 Panel Board Film Printer Compatibility: Roland RA-640 Manufacturer:Ving Parts
Ships to United States
