Cart 
Order Tracking
A4 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky Printed Grid
Item Code: SIC-CM-CP-A4
• Non Slip. • Sticky Printed Grid. • Durable and Convenient. • Comes with marking grids for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the paper moving during work, it’s better to use the cutting mat because of the feature of cutting mat sticky when cut normal material without backing paper. And the material should be sticking on the mat to ensure it non slip. The material size should be smaller than the cutting mat. There are printed grids on the mat that is convenient for you to meature the size you need. 1. To avoid the paper moving during work, it’s better to use the cutting mat when cut normal paper. 2. It can be used about 100 times. 3. Normally, the stickiness will weaken when it was used 20 - 30 times; you’d better use 3M no. 67 glue to spray it in order to prolong its lifespan. 4. The paper should be sticking on the mat. The paper size should be smaller than the cutting mat. Reusing Method: After several times using, the surface of the cutting mat becomes non-sticky. You should wash it before use, and the cutting mat will be re-sticky after cleaning. If the cutting mat is not sticky completely or not sticky enough, you should make use of the bedplate adhesive. 1. Before using, you should wash and clean the cutting mat with a brush. 2. After being cleaned, the cutting mat should be dried in the air, and it will be re-sticky. 3. If the cutting mat is still not sticky, please spread on the cutting mat a layer of bedplate adhesive on the end of cutting mat. 4. Then scraping the bedplate adhesive from one end to the other end of the cutting mat using a squeegee. 5. Make sure the bedplate adhesive evenly on the cutting mat. 6. Dry the cutting mat in the air, and then stick the material to be cut on the cutting mat, and smoothing it out. Warm Tips: You can control the cutting procedure according to the typesetting order, for example, edit graphics will cut firstly. when the stickiness is weaken, you'd better cut the internal pattern first, and then the external in order to prolong the lifespan. It is widely used together with cutting plotter to cut paper, vinyl, heat transfer vinyl, etc. for any shapes, numbers, letters.
Ships to United States
Flora LJ-320P Printer Raster Sensor Cable
Item Code: ACC-FLO-031
Flora LJ-320P Printer Raster Sensor Cable Printer Compatibility: Flora LJ-320P Printer Manufacturer: Flora
Ships to United States
Economic U Shape Alloy Steel Staple Gun Tacker
Item Code: CS-GT-ZG-E
Description: The Staple Gun is easy to refill and has a high powered spring action and a hanging bracket for safe and convenient storage. This heavy duty staple gun is a widely used accessory in architecture or mechanism field. Features: • Light weight and well balanced for easy operating. • Made of high quality stainless steel, durable for being used for a long time. • Ergonomic design, comfortable and easy to operate by just one hand. • Can use it with less force, but it will give you more power. • Executes every task quickly, neatly and professionally. This staple gun is used extensively by building contractors, home DIY'ers and specialty trade applicators for re-covering furniture, decorating, applying fabric to walls or wood, ceiling tile, window screening, upholstering, carpet padding, fence wire, metal lath, cornerite, and many other jobs ranging from light to heavy duty work.
Ships to United States
High Quality SK5 Acrylic Hook Knife Cutter Blades
Item Code: SIC-ZG-MG-012
Description: • Package: 5pcs / parcel • Material: High carbon steel • Sharp and durable: easy to cut and has a long life service. • Protected from the air with rust-preventing oil. • It can be used for cutting Cut wall paper, plywood, plastic, leather, etc. • Blade made from high quality carbon steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Applicable to: It can be applied in home decoration, office supplies, manual cutting, conventional machine cutting, etc.
Ships to United States
Flora LJ-320K Printer Level Sensors Cable
Item Code: ACC-FLO-022
Flora LJ-320K Printer Level Sensors Cable Printer Compatibility: Flora LJ-320K Printer Manufacturer: Flora
Ships to United States
A2 Non Slip Printed Grid lines Cutting Mat (A level 3-Layer)
Item Code: SIC-CM-JWX-3LA-A2
Description: Material: PVC Color: grey and dark green • Comes with marking grids for accurate cutting. • Non-slip surface - for cutting paper, card and other materials. • High quality self-healing Cutting Mat (Cutting Pad) provides a self-healing, non-slip and non-marring cutting surface with cm grid lines. • Impervious to cuts, abrasions and liquid spills. • Preprinted different guidelines on double sides ensure accurate, measured cutting. • The mats are made to be incredibly durable, being capable of withstanding very sharp crafts blades. • Guide markings can help to measure different types of paper and card accurately and minimize cutting errors. • Made from strong flexible material and will not dull blade.
Ships to United States
GZ-3208 Printer Power Board
Item Code: ACC-GZ-031
GZ-3208 Printer Power Board Printer compatibility: GZ-3208 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
Original Flora LJ-320P Printer 7M Pump Power Cable
Item Code: ACC-FLO-020
Original Flora LJ-320P Printer 7M Pump Power Cable Printer Compatibility: Flora LJ-320P Printer Manufacturer: Flora
Ships to United States
GZ-3212 Printer Supply Ink Board
Item Code: ACC-GZ-030
GZ-3212 Printer Supply Ink Board Printer compatibility: GZ-3212 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
GZ-3212 Printer Power Board
Item Code: ACC-GZ-032
GZ-3212 Printer Power Board Printer compatibility: GZ-3212 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
GZ-3208 Printer Supply Ink Board
Item Code: ACC-GZ-029
GZ-3208 Printer Supply Ink Board Printer compatibility: GZ-3208 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
Flora LJ-320K Printer Printhead DC Power Cable
Item Code: ACC-FLO-023
Flora LJ-320K Printer Printhead DC Power Cable Printer Compatibility: Flora LJ-320K Printer Manufacturer: Flora
Ships to United States
Semi-Automatic Business Card Cutter (89 x 54mm)
Item Code: CS-SSB-004
Description: This semi-automatic business card cutter is used for cutting business card. It’s durable for the steel blade and the blade could be milled by itself to ensure it will be sharp. This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This business name card cutter can also cut laminated card or photo. It’s with multi-adjustment with nice out appearance and the cutter is very smart that's easy to take and operate. Warm Tips: 1. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. 2. Test it before using if the business card cutter does not work for a long time. 3. Make sure the business card is aligned with the blade and tighten the screw of the cutter. 4. Don't put your hands under the blade when the machine is running. 5. Please operate under the operation manual strictly. 1. See-through window 9. Feed tension 1 2. Housing 10. Adjustable paper feed knob 2 3. Push mark 11. Paper margin adjustment knob 4. Receptacle 12. Feed tension 2 5. Pass through No. 2 13. Adjustable paper feed knob 1 6. Switch 14. Arrow mark 2 7. Arrow mark 1 15. Warning Mark 8. Pass through No. 1 Item Semi-auto Business Card Cutter Hand Press Card Cutter Feature Automatic type, it’s easy and convenient to operate that is power saving. Manual type, it’s exhausting to operate. High Efficient 30-40pcs/minute 10-20pcs/minute Durable It adopts aluminum alloy blade which is durable with long life-span. Short life time 1. Prepare the business card cutter and then plug the power plug. 2. Insert the card paper along the fixed feed tesion1 to the feed table in pass through No.2. 3. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arriow mark 1. 4. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed. 5. Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1. 6. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window. 7. Power on again followed by pressing “the push mark” with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. 8. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off. The business card cutter is widely used for cutting business card, photo and picture card, etc. Quality Report:
Ships to United States
Semi-Automatic Business Card Cutter (85 x 55mm)
Item Code: CS-SSB-003
Description: This semi-automatic business card cutter is used for cutting business card. It’s durable for the steel blade and the blade could be milled by itself to ensure it will be sharp. This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This business card cutter can also cut laminated card or photo. It’s with multi-adjustment with nice out appearance and the cutter is very smart that's easy to take and operate. Warm Tips: 1. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. 2. Test it before using if the business card cutter does not work for a long time. 3. Make sure the business card is aligned with the blade and tighten the screw of the cutter. 4. Don't put your hands under the blade when the machine is running. 5. Please operate under the operation manual strictly. 1. See-through window 9. Feed tension 1 2. Housing 10. Adjustable paper feed knob 2 3. Push mark 11. Paper margin adjustment knob 4. Receptacle 12. Feed tension 2 5. Pass through No. 2 13. Adjustable paper feed knob 1 6. Switch 14. Arrow mark 2 7. Arrow mark 1 15. Warning Mark 8. Pass through No. 1 Item Semi-auto Business Card Cutter Hand Press Card Cutter Feature Automatic type, it’s easy and convenient to operate that is power saving. Manual type, it’s exhausting to operate. High Efficient 30-40pcs/minute 10-20pcs/minute Durable It adopts aluminum alloy blade which is durable with long life-span. Short life time 1. Prepare the business card cutter and then plug the power plug. 2. Insert the card paper along the fixed feed tesion1 to the feed table in pass through No.2. 3. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arriow mark 1. 4. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed. 5. Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1. 6. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window. 7. Power on again followed by pressing “the push mark” with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. 8. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off. The business card cutter is widely used for cutting business card, photo and picture card, etc. Quality Report:
Ships to United States
Boutique and Shop Promotional Advertising Battery Swing
Item Code: SIC-YB01
, banking, food, clothing, pharmacy, supermarket monopoly, exhibition showcase and so on. Usage: Posting a pop advertising screen, an explosion stickers or advertising slogans, you can put it where you want to show. It can make the atmosphere active, and it can be used as a silent salesman.
Ships to United States
Paper airplane shaped memo clip holder
Item Code: SIC-PH006-4
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
Supermarket Promotion Adjustable Poster Holder
Item Code: SIC-JHB02
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective
Ships to United States
Small house shaped memo clip holders
Item Code: SIC-PH004-6
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
Bone shaped memo clip holders
Item Code: SIC-PH007-9
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
Five-pointed star shaped memo clip holder
Item Code: SIC-PH012-8
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
Musical note shaped memo clip holder
Item Code: SIC-PH014-8
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
Letter M shape memo clip holder
Item Code: SIC-PH019-7
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is
Ships to United States
Letter S shaped memo clip holder
Item Code: SIC-PH011-8
Description: 1. All the memo clip holders are made of high quality iron. 2. Treated with baking finish which is nontoxic, flavorless and environmental friendly, and it is applicable to food display. 3. Elegant appearance and good durability. Usage: Its operation is very
Ships to United States
