Products > "photo frame wood engraver machine":1898Products found
DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 220V
10%

DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 220V

Item Code: CS-PS-DY13-220V

Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape!     I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:  

Laser Power Supply >>

$125.93 - 143.10/set
$113.34 - 128.79/set

Ships to United States

Details >>

25.6" x 35" (650mm x 900mm) High Precision AD CNC Engraver Machine

25.6" x 35" (650mm x 900mm) High Precision AD CNC Engraver Machine

Item Code: CNCR-CP-6590

CNCR-CP-Y series engraving machine, is released for the sign advertising industry with a high performance / cost ratio. It has a new look, fast speed and high precision. It comes with DSC control system, HD LCD screen, and friendly interface. Main Configuration Information: Engraving Area: 

CNC Engraver and Router >>

$3,269.00 - 3,633.00/set

Ships to United States

Details >>

DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 110V

DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 110V

Item Code: CS-PS-DY13-110V

Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:    

Laser Power Supply >>

$125.93 - 143.10/set

Ships to United States

Details >>

DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V

DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V

Item Code: CS-PS-DY20-110V

Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:  

Laser Power Supply >>

$188.88 - 214.64/set

Ships to United States

Details >>

DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 110V

DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 110V

Item Code: CS-PS-DY10-110V

Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:    

Laser Power Supply >>

$104.94 - 119.25/set

Ships to United States

Details >>

DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V

DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V

Item Code: CS-PS-DY10-220V

Mark & model: DY10, small size, quick response, it is suitable for Reci W2/S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape!     I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:    

Laser Power Supply >>

$104.94 - 119.25/set

Ships to United States

Details >>

DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V

DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V

Item Code: CS-PS-DY20-220V

Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape!     I. Instruction for sub - connection wire of the control end   1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA.  2) TH. TL refers to high and low power level respectively, and WP refers to water protection.  3) Footer 5 G refers to ground and 6 refers to input end.  4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively.  7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions.  10) The ammeter is concatenated to the cathode line.   II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation.  III. Instruction for laser connection wire  1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal.    VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:  

Laser Power Supply >>

$188.88 - 214.64/set

Ships to United States

Details >>

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine

Item Code: LCM-KH-960-100W

35 " x 23 " 100W CO2 Laser Engraver and Cutter Machine This 100W CO2 laser engraver is a ideal product to process wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics and glass. Please notice that metal materials are excluded. It is a suitable and the preferred choice of

CO2 Laser Engraver and Cutter >>

$3,396.00 - 3,575.00/set

Ships to United States

Details >>

30W Separated CO2 Laser Marking Machine Non-Metal Laser Marker Engraver

30W Separated CO2 Laser Marking Machine Non-Metal Laser Marker Engraver

Item Code: LMM-JL-C-30W

30W Separated CO2 Laser Marking Machine Non-Metal Laser Marker Engraver This Co2 laser markers are quite suitable for users requiring highest precision and fastest speed batch production, tags, nameplate, and logos. Co2 laser markers take high quality metal laser tube as the laser source. By 2D

Laser Marking Machine >>

$4,718.00 - 4,967.00/set

Ships to United States

Details >>

All-in-One Design Chiller Machine 3000ENW12 for 3kW Handheld Welder Cutter Engraver Cleaner

All-in-One Design Chiller Machine 3000ENW12 for 3kW Handheld Welder Cutter Engraver Cleaner

Item Code: CWFL-3000ENW12TY

All-in-One Design Chiller Machine 3000ENW12 for 3kW Handheld Welder Cutter Engraver Cleaner Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local. Description: All-in-one handheld chiller machine CWFL-3000ENW12 is user

Industry Water Chiller >>

$1,287.00 - 1,399.00/set

Ships to United States

Details >>

51" x 98" 1325 Flatbed Laser Cutter Machine

51" x 98" 1325 Flatbed Laser Cutter Machine

Item Code: LCM-BLC-1325

specialized in cutting boards. If this machine is equipped with honeycomb working table, material conveyer belt and automatically roller, it is very fit for cutting rolling cloth and leather. Materials that can be engraved: Cutting: Acrylic, board, wood model, textile, and leather. Engraving: fur. Product

CO2 Laser Engraver and Cutter >>

$11,101.00 - 11,101.00/set

Ships to United States

Details >>

Eyelet Hand Press Grommet Machine Tool for Banner Including One Mold

Eyelet Hand Press Grommet Machine Tool for Banner Including One Mold

Item Code: CS-MGM-SD

Description: This manual Grommet Machine is smart which is very easy to carry and convenient for shipping. The eyelet punch tool can exchange different die sets (3 different sizes of die set meet customers different requirements). It is very easy to operate because of the simple structure. &bull

Grommet Machine >>

$37.60 - 44.24/set

Ships to United States

Details >>

9" x 7" Sublimation Blank Glass Photo Frame with Outer Mirror Border

9" x 7" Sublimation Blank Glass Photo Frame with Outer Mirror Border

Item Code: CS-GP-BL01

Specification: Size: 180x230x5mm Material: Glass Qty: 25pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame meets the

Sublimation Glass & Crystal Blanks >>

$1.22 - 1.35/pc

Ships to United States

Details >>

11" x 9" Hypoteneuse Sublimation Blank Glass Photo Frame

11" x 9" Hypoteneuse Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL09

Specification: Size: 280x230x10mm Material: Glass Qty: 12pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame meets the

Sublimation Glass & Crystal Blanks >>

$5.26 - 5.84/pc

Ships to United States

Details >>

11.8" x 6.3" Sublimation Blank Glass Photo Frame with Glossy Clock

11.8" x 6.3" Sublimation Blank Glass Photo Frame with Glossy Clock

Item Code: CS-GP-BL28

Specification: Size: 300x160x5mm Material: Glass Spare Parts: 1pc Support Stand Qty: 12pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and

Sublimation Glass & Crystal Blanks >>

$2.63 - 2.92/pc

Ships to United States

Details >>

11.8"x 6.3" Rectangle Sublimation Blank Glass Photo Frame with Clock

11.8"x 6.3" Rectangle Sublimation Blank Glass Photo Frame with Clock

Item Code: CS-GP-BL11

Specification: Size: 300x160x5mm Material: Glass Qty: 12pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame meets the

Sublimation Glass & Crystal Blanks >>

$34.41 - 38.23/carton

Ships to United States

Details >>

7.8"x7.8" Rectangle Sublimation Blank Glass Photo Frame

7.8"x7.8" Rectangle Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL25

Specification: Size: 200x200x5mm Material: Glass Spare Parts: 1pc Support Stand Qty: 20pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and

Sublimation Glass & Crystal Blanks >>

$1.26 - 1.40/pc

Ships to United States

Details >>

7.0" x 9.0" Glossy Square Sublimation Blank Glass Photo Frame

7.0" x 9.0" Glossy Square Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL31

Specification: Size: 180x230x5mm Material: Glass Spare Parts: 1pc Support Stand Qty: 25pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and

Sublimation Glass & Crystal Blanks >>

$1.26 - 1.40/pc

Ships to United States

Details >>

4.7" x 9" Rectangle Sublimation Blank Glass Photo Frame

4.7" x 9" Rectangle Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL08

Specification: Size: 120x230x10mm Material: Glass Qty: 20pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame meets the

Sublimation Glass & Crystal Blanks >>

$2.76 - 3.07/pc

Ships to United States

Details >>

15"x 11" Hypotenuse Sublimation Blank Glass Photo Frame

15"x 11" Hypotenuse Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL13

Specification: Size: 390x290x10mm Material: Glass Qty: 12pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame meets the

Sublimation Glass & Crystal Blanks >>

$86.39 - 95.99/carton

Ships to United States

Details >>

8.6" x 4.9" Rectangle Sublimation Blank Glass Photo Frame

8.6" x 4.9" Rectangle Sublimation Blank Glass Photo Frame

Item Code: CS-GP-BL19

Specification: Size: 220x125x10mm Material: Tempered Glass Qty: 20pcs/CTN Description: The sublimation glass photo frame is fashionable and flashy, it creates a new era of photo frame.  With the continuous improvement of people's aesthetic taste, produce a unique and personalized photo frame

Sublimation Glass & Crystal Blanks >>

$5.84 - 6.49/pc

Ships to United States

Details >>

8 in 1 Combo Heat Press Machine 11.0" x 15.0" (280 x 380mm)

8 in 1 Combo Heat Press Machine 11.0" x 15.0" (280 x 380mm)

Item Code: HTM-MLF-8IN1-II

perfect printing. • CE approved. Description: This combo Heat press machine is consisted of 8 accessories they are: T-shirt heating plate, mug heating plate(4kinds),cap heating plate and plate heating plate (two sizes). This heat press machine enjoys multifunctions in one machine, it can be

Combo Heat Presses >>

$377.00 - 424.00/set

Ships to United States

Details >>

Subscribe to our special offers:
Follow us: 'like' us on Facebook 'Fallow us on Youtube