Cart 
Order Tracking
2 PCS EFR F10 180W CO2 Sealed Laser Tube for Laser Engraver
Item Code: CS-LT-F10-180W-2
Tips: • We will send a new one freely if the tube is broken during transit. • Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Model Length (mm) Diameter (mm) Output Power (W) Max Power (W) Current (mA) Catalyst Lifespan Warranty Period F10 2050±20 Ø80±2 170 185 30 Yes 6000h 300days Feature: F10 CO2 Laser Tube is launched in October 2011 with 3 years development, its working life is up to 6000hours, the single tube power is up to 185W. The laser output is stable. The discharge tube is catalyst coated, the working life is much increased. Compared to similar product, the tube body length is shorter, the laser beam mode is better, the cutting speed is higher. • Stability: The discharge glass tube body is imported from Germany. The laser beam mode is up to TEM00. The power is table. It is competitive for industrial application. • Power: The power is 30% higher than other laser tube with same length. • Long Life: The catalyst coating on discharge tube with unique electrode processing makes the laser out put is more stable, avoid power weaken during long time working. Product upgrade: • Use USA IIVI lens and windows & Germany Schott glass tube as discharge tube, performance, reliability, consistency is higher than other similar product. • High voltage side uses a ceramic water cooling jacket, reduce problems compared to glass cap which is made by hand.Ceramic heat dissipation better. • The silicone pipe is once molded product, water flow more smoothly. • Improved production processing, reduce gas leakage. • New machining electrode makes discharge more stable. Product details: Application: Warranty: 300 Days • Within 90 days from exit work date, if the user operates same as our manual and the output power is less than 80% of the rated power, we will provide new one instead of the defected one. The replaced laser tube has same new laser tube warranty. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged changed, we will not be responsible. • From 90 days to 300 days, if the user operates same as our manual and the output power is less than 80% of the rated power, we will repair or provide new one instead of the defected one according to fact. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged changed, we will not be responsible.
Ships to United States
Yongli A2S 80W 1250mm CO2 Laser Tube for the Laser Engraver
Item Code: CS-LT-YL-A2S
Description: Yongli A2S 80W 1250mm CO2 Laser Tube for the Laser Engraver,12 Months Service Life Description:AS series is new patent products with better spot, power and life thanks for imported lens from II-VI company, advanced production processing and catalytic reduction technology coating, which
Ships to United States
Motorized Up and Down Patform for LEM-RS-X700 Series Laser Engraver
Item Code: CS-LM-MUD02
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
60W Upgrade to 90W Reci S2 Laser Tube for Redsail Laser Engraver
Item Code: CS-LM-LT6090
60W Upgrade to 90W Reci S2 Laser Tube for LEM-RS redsail Laser Engraver Remarks: Product must be orderd by upgrade laser tube power of redsail laser engraving machine.You can not buy it separatly.
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-25
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (25mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-17
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (17mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm
Item Code: CS-BLT-2388-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA
Item Code: LCM-KH-320-40W
12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA This 40W CO2 Laser Engraver integrates a lot of upgraded and advanced technologies, all of which guarantee the good quality of high precise and speed. It is a suitable machine to process various nonmetal materials including: acrylic
Ships to United States
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines
Item Code: LCM-KH-750-100W
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines TThis Laser Engraver is equipped with EFR 100W CO2 Laser Tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP
Ships to United States
51" x 35" Laser Engraver Engraving Honeycomb Work Table Platform
Item Code: CS-LM-HWT1390
51" x 35" Laser Engraver Engraving Honeycomb Work Table Platform The Work Table is for LCM-BY-Z1390 Laser Engraver. Assembly line production, fine workmanship, the surface is flat and smoothly. Parameters: Material: Aluminum alloy (frame) and galvanized steel (body) Size: 1320mm x 950mm
Ships to United States
US Stock, 35" x 25" 9060 CNC Engraver CNC Router
Item Code: CNCR-LD-9065H-US
operation with the instructions of the technician from `factory` or agent) Product Features Base Frame: it is an iron casting base being precisely processed by gantry milling machine and stress relieved by vibration device so that the foundation remains true and steady over the operational life of
Ships to United States
150W Laser Power Supply with Real-time Data for CO2 Laser Tube Engraver Cutter
Item Code: CS-PS-HY-XA150
150W Laser Power Supply with Real-time Data for CO2 Laser Tube Engraver Cutter Features: 1. Good compatibility, HY-XA150 Power Supply can be applicable to 130W-150W laser tubes manufactured by other factories. 2. Power Supply is small in size, light in weight, easy to operate, and has a high
Ships to United States
Handheld Passport ID Photo Cutter 35x45mm Photo Punch Cutter
Item Code: CS-E-003-3545
• Hand held. • Cutting photos for smaller sizes. • No rough edges on the finished products. • Customized sizes are welcome. Descriptions: This photo cutter series can cut photo within the scope of 1 to 3 inch. It has correct and convenient orientation. There are
Ships to United States
PMS18A Mini Photo Book Station
Item Code: SIC-HY-PMS18A
Description: The PMS18A features a photo book mounting that has a part hard cover. It can produce any book format from 2.0"×2.0" (50×50mm) up to 18.0"×18.0" (457×457mm) and 3.1" (80mm) thick. Fast, precise, convenient and high quality photo
Ships to United States
PMS18 Mini Photo Book Station
Item Code: SIC-HY-PMS18
Description: . Fast, precise, convenient and high quality photo book manufacture system. In side table top, easy to use and low cost production to create a beautiful, professional photobook in minutes. . It has a special process against tacky mounting unit. . The unique lift damping makes the
Ships to United States
PMS12 Mini Photo Book Station
Item Code: SIC-HY-PMS12
mounting process easier and faster. Fast, precise, convenient and high quality photo book manufacture system. Cover location guide rail makes a precisely and fast cover attach of the block. In side table top, easy to use and low cost production to create a professional photo book in minutes. Application
Ships to United States
