Cart 
Order Tracking
DC-400A bill binding machine
Item Code: SIC-DC-400A
punching and binding , improve the efficiency. 5. Self inspection of all the functions, and warnings for errors. 6. Intelligent supportive mat can remind the punching, and the design of functions is humanly. Application: The model is widely used in financial institutes, government departments, and so on
Ships to United States
DC-400B Bill Binding Machine
Item Code: SIC-DC-400B
punching and binding , improve the efficiency. 5. Self inspection of all the functions, and warnings for errors. 6. Controlled by micro-computer, the temprature can be set according to requirements Application: The model is widely used in financial institutes, government departments, and so on.
Ships to United States
DC-3000 bill binding machine
Item Code: SIC-DC-3000
Description: DC-3000manually thermal punching and binding machine, The model is widely used in financial institutes, government departments, Archives Bureau, files departments of hospitals, and the binding of accounting files, bills, archives, documents and materials in enterprises (especially for
Ships to United States
Hand Held ID Card License Photo Picture Punch Cutter
Item Code: CS-E-002
Highlights: • Hand type • Cutting photos for smaller sizes • No rough edges on the finished products • Customized sizes are welcome. Descriptions: This photo cutter series can cut photo within the scope of 1 to 3 inch. It has correct and convenient orientation. There are no rough edges on the finished products. As an ideal tool of cutting all kinds of photos, it is convenient to carry and proves efficiency. Item Photo Cutter Cutter Knife Application Specially for cutting photo paper. It can cut paper, photo, KT board, etc. Convenient It’s convenient to cut without other tools. It need to use together with ruler. Efficient It’s high efficient to use the photo cutter. You just press the handle that you can get the photo you want. It’s slower because it need the ruler to cut or it can not cut with straight line. Cutting Effect There are no rough edges on the cut photos. It’s easy to make rough edges. Warm Tips: • This photo cutter is suitable for cutting the photo paper with the thickness between 150g-200g. It will get not very good effect when the thickness is out of the range of 150g-200g and the photo is laminated film. • Please check the size you want in the specification form before you place an order. • There are many sizes of the cutter, but one cutter with one size and it can not adjustable. The photo cutter is used for cutting photos, such as ID card photo, photo for driver's license, photo for passport, etc. Packing Details: Packing Size: 9.84" x 3.93" x 3.15" (250 x 100 x 80mm) G.W.: 0.6kg
Ships to United States
Hand Held Passport ID License Photo Punch Cutter
Item Code: CS-E-003
• Hand held. • Cutting photos for smaller sizes. • No rough edges on the finished products. • Customized sizes are welcome. Descriptions: This photo cutter series can cut photo within the scope of 1 to 3 inch. It has correct and convenient orientation. There are no rough edges on the finished products. As an ideal tool of cutting all kinds of photos, it is convenient to carry and proves efficiency. Item Photo Cutter Cutter Knife Application Specially for cutting photo paper. It can cut paper, photo, KT board, etc. Convenient It’s convenient to cut without other tools. It need to use together with ruler. Efficient It’s high efficient to use the photo cutter. You just press the handle that you can get the photo you want. It’s slower because it need the ruler to cut or it can not cut with straight line. Cutting Effect There are no rough edges on the cut photos. It’s easy to make rough edges. Warm Tips: • This photo cutter is suitable for cutting the photo paper with the thickness between 150g-200g. It will get not very good effect when the thickness is out of the range of 150g-200g and the photo is laminated film. • Please check the size you want in the specification form before you place an order. • There are many sizes of the cutter, but one cutter with one size and it can not adjustable. The photo cutter is used for cutting photos, such as ID card photo, photo for driver's license, photo for passport, etc.
Ships to United States
Hand Held Passport ID Photo Picture Punch Cutter
Item Code: CS-E-004
Hand Held Passport ID Photo Picture Punch Cutter Passport Punch Cutter has the specifications of 40x60mm Right Corner/50x70 Right Corner/50x70 Round Corner. Please choose the correct size • Hand held. • Cutting photos for smaller sizes. • No rough edges on the finished products. • Customized sizes are welcome. Descriptions: This photo cutter series can cut photo within the scope of 1 to 3 inch. It has correct and convenient orientation. There are no rough edges on the finished products. As an ideal tool of cutting all kinds of photos, it is convenient to carry and proves efficiency. Item Photo Cutter Cutter Knife Application Specially for cutting photo paper. It can cut paper, photo, KT board, etc. Convenient It’s convenient to cut without other tools. It need to use together with ruler. Efficient It’s high efficient to use the photo cutter. You just press the handle that you can get the photo you want. It’s slower because it need the ruler to cut or it can not cut with straight line. Cutting Effect There are no rough edges on the cut photos. It’s easy to make rough edges. Warm Tips: • This photo cutter is suitable for cutting the photo paper with the thickness between 150g-200g. It will get not very good effect when the thickness is out of the range of 150g-200g and the photo is laminated film. • Please check the size you want in the specification form before you place an order. • There are many sizes of the cutter, but one cutter with one size and it can not adjustable. The photo cutter is used for cutting photos, such as ID card photo, photo for driver's license, photo for passport, etc.
Ships to United States
300W 75L Portable Acrylic Polishing Machine Oxygen Hydrogen Welder
Item Code: APM-H160
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. Description: • Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. • The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. This machine has two colors, blue and white.Color will be shipped at random. • Take water (Distilled water and pure water) as fuel; • "low working voltage, cut off automatically beyond the set voltage" design; • Improved model from APM-H60; • Its electrolysis adopts series and parallel compound technique. • Economical, environmental protection, fuel obtained easily; • The design makes the machine safer and save more energy; • The New Model No. is APM-H160, and its maximum output gas is up to 75l / h; • The electrolysis is more efficient. • Heat treatment for metal parts. • Weld the hinge of spectacles rim. • Seal the injection glass bottle, conforming to GMP industrial standards. • Fuse the lead or tin alloy plate for storage battery. • Cut and fuse quartz or fine parts etc. • Peel off FPC of computer, fuse LED chip and thermocouple. • Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. • Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny. • Strong and durable, light weight and portable. • Save a lot of money and time for you. • Economical and practical. • Energy saving, environmental friendly, safe and reliable • The edge polished by this machine is more smooth and shiny. The flame acrylic polishing machine’s instruction: Flame gun instruction: 1. Adjusting valve; 2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 5. Flame gun bar; 6. Air inlet port; 7. Pin type flame nozzle (option). Add water timely After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. How to add water? 1. Turn off the torch. 2. Switch off the power and open the valve on the torch to let out the remaining gas. 3. Screw off the top cover. 4. Add water close to the “high” line. 5. Screw on the cover and switch on the machine, and it can work again. Attention: KOH or NaOH is dangerous, please do not eat them. The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. Warning: When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. Do not repair it by yourself, you should contact us. The above cover; please do not load metal pieces. Please connect the ground wire. Forbid ignite while no air pressure • Synthetic Glass Industry. The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article. • Electronic Industry. IC encapsulation. • Semiconductor. • Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect. 2. Lead and tin pole fusion accumulator. 3. Engineering precision. • School laboratory.） Provides a convenient and safe oxy-hydrogen flame. Quality report:
Ships to United States
Ving 300W 95L Portable Acrylic Polishing Machine, Oxygen Hydrogen Flame Generator 1 Gas Torch free, 110V
Item Code: APM-H180A-110V
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. Description: • Synthetic glass (acrylic) polishing, Oxy - hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. • The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. • Take water (Distilled water and pure water) as fuel; • "low working voltage, cut off automatically beyond the set voltage" design; • H180 is updated from H100, it is economical type acrylic flame polishing machine; • Its electrolysis adopts series and parallel compound technique. • Economical, environmental protection, fuel obtained easily; • The design makes the machine safer and save more energy; • APM-H180 is safe and reliable with low energy consumption; • The electrolysis is more efficient. • Heat treatment for metal parts. • Weld the hinge of spectacles rim. • Seal the injection glass bottle, conforming to GMP industrial standards. • Fuse the lead or tin alloy plate for storage battery. • Cut and fuse quartz or fine parts etc. • Peel off FPC of computer, fuse LED chip and thermocouple. • Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. • Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny. • Strong and durable, light weight and portable. • Save a lot of money and time for you. • Economical and practical. • Energy saving, environmental friendly, safe and reliable • The edge polished by this machine is more smooth and shiny. The flame acrylic polishing machine’s instruction: Flame gun instruction: 1. Adjusting valve; 2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 5. Flame gun bar; 6. Air inlet port; 7. Pin type flame nozzle (option). Add water timely After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. How to add water? 1. Turn off the torch. 2. Switch off the power and open the valve on the torch to let out the remaining gas. 3. Screw off the top cover. 4. Add water close to the “high” line. 5. Screw on the cover and switch on the machine, and it can work again. Attention: KOH or NaOH is dangerous, please do not eat them. The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. Warning When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. Do not repair it by yourself, you should contact us. The above cover; please do not load metal pieces. Please connect the ground wire. Forbid ignite while no air pressure • Synthetic Glass Industry. The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article. • Electronic Industry. IC encapsulation. • Semiconductor. • Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect. 2. Lead and tin pole fusion accumulator. 3. Engineering precision. • School laboratory.） Provides a convenient and safe oxy-hydrogen flame. Quality report:
Ships to United States
Qomolangma 26" Small Home electric Business Card Cold Laminating Machine
Item Code: FMJ-650-II
, so it is crucial to give good care and maintenance to the roller. FMJ-650-II is common manual and electrical cold laminator, cannot take up the liner paper mechanically. But it is very cheap. FMJ-650-II-PLUS is semi – auto cold laminator (Automatic take - up rolls of liner paper, without
Ships to United States
Qomolangma 63" Full-auto Wide Format Liquid Laminator Aqueous Liquid Coater
Item Code: FMJ-1600-WL
Random delivery is gray machine, If you need white machine, please contact customer service for customization. Qomolangma 63" Full-auto Wide Format Liquid Laminator Aqueous Liquid Coater Liquid laminates provide UV protection and image enhancement for a wide variety of graphic applications. Liquid laminates are often a great alternative to film laminates and can be an effective way to protect billboards, prints, fine art, signs, banners, awnings and other products from the elements. Liquid laminates come in many formulas and offer a number of advantages over rolled film coatings. They are extremely economical and don’t produce much waste when machine applied. Vinyl that has been treated with a liquid laminate is weldable (hot air and radio frequency) and the coating offers as much or more UV and abrasion protection as film laminates. They will also stretch and conform to uneven surfaces better than a hard coat film product. Description: Support Roll To Roll Operation. Mainly used for roll to roll coating of vinyl, banner, canvas etc. This series of liquiq laminator is widely used in the post-production of outside/inside advertisement and vehicle body advertisement. Available size in 63.0" (1600mm), 78.7" (2000mm), 86.6" (2200mm) width. Coating process Products Highlights: . This liquid laminator has both drying system and cooling system, which make the coating film from `liquid` state to solid state. After laminating, the media can be crack resist, more flexible, UV protection, scratch resist etc. . 61", 76", 83" Maximum working film width for your option. . Easy operation panel: Dryer, fan, motor, pump button Various speed and temperature adjustment Temperature indication Emergency Stop Button . Compatible with most roll-to-roll solvent, eco-solvent and pigmented inkjet printers, this liquid laminator protect inkjet graphics on vinyl, PSA, non-porous textiles, wet strength wall covering, canvas and other flexible substrates. . Liquid film is formed directly on the picture surface, and the film thickness is up to the size of Mayer bar. You can change the Mayer bar to increase film thickness according to requirement. . Has both flash drying system and cooling system, which make the coating film from `liquid` state to solid state, especially for hard-to-dry inks. . The liquid laminator is cost-effective and environmentally friendly. Coating costs range from $0.25 to $0.32 per sqm, depending on application and coating used. . Easy to operate and clean, requires minimal operator training. Applications: The series liquid laminator is one kind of after printing equipments, it is applicable to outdoor advertisements (printed by solvent ink). Detailed pictures: Liquid film tube Liquid film tank Control panel Liquid film status lights Mayerbar Laminator showroom
Ships to United States
5 in 1 Combo Heat Press Machine 11.0" x 15.0" (280 x 380mm)
Item Code: HTM-MLF-5IN1-II
. • Heating coil and heating panel are integrated, safe and durable. • Issues with certain thickness can also be transferred. • Adopting advanced technology and good material for better effect. • Swing-away design and more even pressure guarantees your perfect printing. • CE
Ships to United States
5 in 1 Combo Heat Press Machine 5.9" x 7.9" (150 x 200mm)
Item Code: HTM-MLF-5IN1-I
; Heating coil and heating panel are integrated, safe and durable. • Issues with certain thickness can also be transferred. • Adopting advanced technology and good material for better effect. • Swing-away design and more even pressure guarantees your perfect printing. • CE approved
Ships to United States
