Cart 
Order Tracking
300W 75L Portable Acrylic Polishing Machine Oxygen Hydrogen Welder
Item Code: APM-H160
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. Description: • Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. • The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. This machine has two colors, blue and white.Color will be shipped at random. • Take water (Distilled water and pure water) as fuel; • "low working voltage, cut off automatically beyond the set voltage" design; • Improved model from APM-H60; • Its electrolysis adopts series and parallel compound technique. • Economical, environmental protection, fuel obtained easily; • The design makes the machine safer and save more energy; • The New Model No. is APM-H160, and its maximum output gas is up to 75l / h; • The electrolysis is more efficient. • Heat treatment for metal parts. • Weld the hinge of spectacles rim. • Seal the injection glass bottle, conforming to GMP industrial standards. • Fuse the lead or tin alloy plate for storage battery. • Cut and fuse quartz or fine parts etc. • Peel off FPC of computer, fuse LED chip and thermocouple. • Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. • Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny. • Strong and durable, light weight and portable. • Save a lot of money and time for you. • Economical and practical. • Energy saving, environmental friendly, safe and reliable • The edge polished by this machine is more smooth and shiny. The flame acrylic polishing machine’s instruction: Flame gun instruction: 1. Adjusting valve; 2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 5. Flame gun bar; 6. Air inlet port; 7. Pin type flame nozzle (option). Add water timely After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. How to add water? 1. Turn off the torch. 2. Switch off the power and open the valve on the torch to let out the remaining gas. 3. Screw off the top cover. 4. Add water close to the “high” line. 5. Screw on the cover and switch on the machine, and it can work again. Attention: KOH or NaOH is dangerous, please do not eat them. The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. Warning: When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. Do not repair it by yourself, you should contact us. The above cover; please do not load metal pieces. Please connect the ground wire. Forbid ignite while no air pressure • Synthetic Glass Industry. The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article. • Electronic Industry. IC encapsulation. • Semiconductor. • Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect. 2. Lead and tin pole fusion accumulator. 3. Engineering precision. • School laboratory.） Provides a convenient and safe oxy-hydrogen flame. Quality report:
Ships to United States
Ving 300W 95L Portable Acrylic Polishing Machine, Oxygen Hydrogen Flame Generator 1 Gas Torch free, 110V
Item Code: APM-H180A-110V
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. Description: • Synthetic glass (acrylic) polishing, Oxy - hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. • The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright. • Take water (Distilled water and pure water) as fuel; • "low working voltage, cut off automatically beyond the set voltage" design; • H180 is updated from H100, it is economical type acrylic flame polishing machine; • Its electrolysis adopts series and parallel compound technique. • Economical, environmental protection, fuel obtained easily; • The design makes the machine safer and save more energy; • APM-H180 is safe and reliable with low energy consumption; • The electrolysis is more efficient. • Heat treatment for metal parts. • Weld the hinge of spectacles rim. • Seal the injection glass bottle, conforming to GMP industrial standards. • Fuse the lead or tin alloy plate for storage battery. • Cut and fuse quartz or fine parts etc. • Peel off FPC of computer, fuse LED chip and thermocouple. • Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc. • Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny. • Strong and durable, light weight and portable. • Save a lot of money and time for you. • Economical and practical. • Energy saving, environmental friendly, safe and reliable • The edge polished by this machine is more smooth and shiny. The flame acrylic polishing machine’s instruction: Flame gun instruction: 1. Adjusting valve; 2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 5. Flame gun bar; 6. Air inlet port; 7. Pin type flame nozzle (option). Add water timely After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water. How to add water? 1. Turn off the torch. 2. Switch off the power and open the valve on the torch to let out the remaining gas. 3. Screw off the top cover. 4. Add water close to the “high” line. 5. Screw on the cover and switch on the machine, and it can work again. Attention: KOH or NaOH is dangerous, please do not eat them. The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place. Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock. Warning When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately. Do not repair it by yourself, you should contact us. The above cover; please do not load metal pieces. Please connect the ground wire. Forbid ignite while no air pressure • Synthetic Glass Industry. The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article. • Electronic Industry. IC encapsulation. • Semiconductor. • Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect. 2. Lead and tin pole fusion accumulator. 3. Engineering precision. • School laboratory.） Provides a convenient and safe oxy-hydrogen flame. Quality report:
Ships to United States
Qomolangma 26" Small Home electric Business Card Cold Laminating Machine
Item Code: FMJ-650-II
take – up roller for after lamination prints). Appearance - Take reasonable money to buy the suitable machines. Our Machine: Appearance design of FMJ-650-II cold laminating machine has novel, simple and reasonable structure, humane and low cost characteristics. The other
Ships to United States
Qomolangma 63" Full-auto Wide Format Liquid Laminator Aqueous Liquid Coater
Item Code: FMJ-1600-WL
-effective and environmentally friendly. Coating costs range from $0.25 to $0.32 per sqm, depending on application and coating used. . Easy to operate and clean, requires minimal operator training. Applications: The series liquid laminator is one kind of after printing equipments, it is applicable to
Ships to United States
5 in 1 Combo Heat Press Machine 11.0" x 15.0" (280 x 380mm)
Item Code: HTM-MLF-5IN1-II
. • Heating coil and heating panel are integrated, safe and durable. • Issues with certain thickness can also be transferred. • Adopting advanced technology and good material for better effect. • Swing-away design and more even pressure guarantees your perfect printing. • CE
Ships to United States
5 in 1 Combo Heat Press Machine 5.9" x 7.9" (150 x 200mm)
Item Code: HTM-MLF-5IN1-I
; Heating coil and heating panel are integrated, safe and durable. • Issues with certain thickness can also be transferred. • Adopting advanced technology and good material for better effect. • Swing-away design and more even pressure guarantees your perfect printing. • CE approved
Ships to United States
700mm x 500mm 80W CO2 Laser Engraver and Cutter Machines
Item Code: LCM-KH-750-80W
700 mm x 500 mm 80W CO2 Laser Engraver and Cutter Machines This Laser Engraver is equipped with 80W CO2 laser tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST
Ships to United States
440ml Refill Ink Cartridge for Roland Inkjet Printer Machines
Item Code: ACC-ROL-320
440ml Refill Ink Cartridge for Roland Inkjet Printer Machines Printer compatibility: Almost All Roland Inkjet Printer Machines Feature: This kind of cartridge doesn't need funnel, and you can fill the ink from the ink bottle directly. Manufacturer: Ving Parts
Ships to United States
440ml Refill Ink Cartridge for Mutoh Inkjet Printer Machines
Item Code: ACC-ROL-320-WT
440ml Refill Ink Cartridge for Mutoh Inkjet Printer Machines Printer compatibility: Almost All Mutoh Inkjet Printer Machines Feature: This kind of cartridge doesn't need funnel, and you can fill the ink from the ink bottle directly. Manufacturer: Ving Parts
Ships to United States
440ml Refill Ink Cartridge for Mimaki Inkjet Printer Machines
Item Code: ACC-ROL-320-M
440ml Refill Ink Cartridge for Mimaki Inkjet Printer Machines Printer compatibility: Almost All Mimaki Inkjet Printer Machines Feature: This kind of cartridge doesn't need funnel, and you can fill the ink from the ink bottle directly. Manufacturer: Ving Parts
Ships to United States
Generic Mimaki JV150 / CJV150 Cap Pad
Item Code: ACC-MIM-362
Generic Mimaki JV150 / CJV150 Cap Pad Printer Compatibility: Mimaki JV150 / CJV150 Manufacturer: Ving Parts
Ships to United States
New Sublimation Blank Linen Pot Pad
Item Code: CS-DB-JT-01
Description: This is one blank Pot pad which you can print the image you like using sublimation technology. · Product Size: 15 x 15cm · Printing Size: 15 x 15cm · Unit Weight: 25g · Material: Linen · Suggested Temp & Time: 180°C & 40-50secs
Ships to United States
Personalized 7"x 9" Mouse Pad 2" Thickness Mouse Pad With Custom Graphic
Item Code: SIC-MP-792
Specification: Material: Rubber Print Type: Sublimation Product Size: 18 x 22 x 0.3cm (7 x 9 x 0.12in) Package Size: 25 x 20 x 0.5cm (9.8 x 7.8 x 0.2in) GW: 120g (0.26lbs)
Ships to United States
