Cart 
Order Tracking
US Stock CALCA 24in DTF Film Rolls Printing Starter Supply Pack (1L CMYK, 1L W Ink, 11 lbs Powder, 24in Roll Film)
Item Code: DTF-KIT-03-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA 24inch DTF Supply Pack Film & Ink & Powder CALCA
Ships to United States
US Stock CALCA A3 DTF Film Sheets Printing Starter Supply Pack (500ml CMYK, 1L W DTF Ink, 2.2 lbs Powder, A3 Sheet Film)
Item Code: DTF-KIT-02-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA DTF Starter Supply Small Pack Film & Ink & Powder
Ships to United States
CALCA PRO 24in DTF Film Rolls Printing Starter Supply Pack (1L PRO CMYK, 1L PRO W Ink, 11 lbs Powder, 24in Roll Film)
Item Code: DTF-KIT-03-PRO-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. CALCA PRO 24in DTF Film Rolls Printing Starter Supply Pack (1L PRO CMYK, 1L PRO W Ink, 11 lbs Powder, 24in Roll Film) Water
Ships to United States
US Stock, CALCA 24in DTF Film Rolls Printing Starter Supply Pack (1L CMYK, 2L W Ink, 11 lbs Powder, 3 Rolls 24in DTF Film)
Item Code: DTF-KIT-04-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA 24inch DTF Supply Pack Film & Ink & Powder US
Ships to United States
CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 1L W Ink,1L V Ink, 11.8in Film A 1 Roll, 12in Film B 1 Roll)
Item Code: UVDTF-KIT-03-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 4L W Ink,4L V Ink, 24in Film A 2 Rolls, 24in Film B 2
Ships to United States
CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 4L W Ink,4L V Ink, 24in Film A 2 Rolls, 24in Film B 2 Rolls)
Item Code: UVDTF-KIT-01-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 4L W Ink,4L V Ink, 24in Film A 2 Rolls, 24in Film B 2
Ships to United States
CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 1L W Ink,1L V Ink, 24in Film A 1 Roll, 24in Film B 1 Roll)
Item Code: UVDTF-KIT-02-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. CALCA 24in UVDTF Film Rolls Printing Starter Supply Pack (1L CMYK, 1L W Ink,1L V Ink, 24in Film A 1 Roll, 24in Film B 1 Roll
Ships to United States
Economy Manual Acrylic Letter Making Tool Bender, A+U Type
Item Code: CS-HD-BC09
Feature • PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control; • Constant temperature technology, longer life; • Easy operation, time-saving; • The heating plate using oxidation treatment, heating don't smoke; Used for It is suitable for heating acrylic within 1.5mm – 4mm (0.06" x 0.16") thickness. Benefit • The fourth generation product, PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control, longer life; • Automatic constant temperature, without tedious temperature Settings, it is more convenient to use; • Titanium alloy thermal conductivity plate, side bar heated evenly, automatically adjust the heating plate and the edge of the joint Angle, rapid heat transfer of edge to soften; • The heating plate surface oxidized by special processing, do not produce flue gas when heated, non-stick plate; • The practical design, the shell is made of high quality heat-resistant engineering plastics, has adjusted balance; • Warranty: 1 year. Specification Voltage: 100-240V Power: Angle bending 39W, Arc bending 60W Heating Temperature: 200°C±5% Arc Heater size: 100mm x 50mm x 2mm (3.9" x 2" x 0.08") Angle Heater Size: 100mm x 2.5mm x 2mm (3.9" x 0.1" x 0.08") Bending Letter Hight: 0 - 100mm (3.9") Bending Thickness: 1.5mm - 4mm Arc bending soft time (2.5mm thickness, 20℃): About 9 seconds Angle bending soft time (2.5mm thickness, 20℃): About 5 seconds 360 Degree Rotate End: Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC09 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint. Remarks: • You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven. • If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm. • With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity. • Please do not put the heating plate onto the power cable. • Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order. Connect the power cable, after about 60 seconds heating time, you can use the bender. Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue. Processing Material: Acrylic, Plastic, PVC, Plexiglass This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making. The acrylic bending machine is a equipment which can softens and bends materials such as acrylic, organic plate, PVC, etc and other various thermoplastic materials into shapes by heating. It is widely applied.
Ships to United States
Manual Balloon Screen Printing Machine Kit for Balloon DIY Printer
Item Code: SPM-TJ-DQS-BALLOON
One Color Balloon Complete Set of Screen Printing Equipment This set of equipment is equipped with all the machines required for silk screen printing monochrome balloon, including silk screen printing machine, balloon limit table, air pump and six-layer balloon drying rack, free of no glue self-stretching frame, balloon, balloon sealing clamp, scraper, mesh and other materials and tools. Only need to buy balloon ink (or rubber ink) user can print small batch customized balloon. Note: Printing balloons must use special balloon ink or rubber ink, the ink has good ductility, the printed design when inflating will not crack after deflating ink, ink, when re-inflating, still can restore the original complete pattern, specific use method please consult the ink dealer. Operation process: 1.Install the screen plate on the machine 2.Use air pump to blow the balloon to a certain degree, and then place it on the balloon platform of the screen printing machine.Place the balloon in the middle of press plate, put down the screen plate, and check whether the printed pattern is fully attached to the balloon; Balloon expansion is too large or too small,the balloon can be properly deflated or inflated, or adjust the height of the chuck to achieve the most appropriate printing standards. 3.Take out the balloon with appropriate air pressure and place it on the limit platform. Adjust the baffles on both sides of the limit platform. Make both sides of the limit board stick on the balloon edge, fixed limit board, print after the balloon inflation with limit board as the standard. 4.Start printing, inflate the balloon and seal the air outlet with balloon clip; 5.Place on the screen printing table, press the pressure plates on both sides of the balloon. 6.Print, lift the screen plate, open the pressure plate, take out the balloon, and place it on the balloon drying rac. Feature: 1.Screen frame chuck can be adjusted up and down 6.9"/176 mm; Just loosen 4 handles on the back, move up and down the strip hole, and tighten the handle after moving to the appropriate position. 2.Chuck balance support handle is located at the back of the middle,it can adjust the chuck and frame parallel, down or up. 3.The balloon placement platform can move forward and backward as required. 4.Both sides of explosion-proof safety baffles can move up and down, forward and backward. Protect your safety when the balloon may burst. 5. The pressure ball board on the upper part of the explosion-proof board can be flipped and moved around. 6.Screen frame handle can be installed on the side and upper part. 7.The baffles on both sides of the balloon limit table and the blowhole upright plate can move around according to the size of the balloon. 8.All parts that may come into contact with the balloon shall be installed with protective rubber strips to ensure that there is no sharp object in contact with the balloon during the whole printing process. 9. Special balloon air drying rack can expand 17"/440 mm up and down. When not in use, it can be folded and placed directly without taking up space. Application: This set equipment is very suitable for wedding companies, wedding gift shop, advertising production shop, flower gift shop, business etiquette companies, hotels and other businesses specializing in personalized custom use. For the activity of the individual or unit such as wedding, birthday, opening,theme or blessing language, design is printed on adornment balloon, this can show the class of the activity to the utmost and savour, a lot of people still regard such adornment balloon as souvenir to collect, small batch of the personalized printing demand is very broad. This set equipment includes: One balloon screen printing machine One balloon air pump (110V or 220V voltage optional) One balloon limit table One height retractable balloon drying rack (about 30 standard balloons can be hung, and all the necessary parts for hanging balloons to dry) Free materials and tools: one no glue self-tensioning frame (reusable); A scraper with a width of 14cm; 100 pieces mixed-color balloons;100 pieces Balloon seal clip.
Ships to United States
2" (50mm) Penguin Manual Metal Strip Bending Plier
Item Code: CS-MCLB-50
Discription: Model No: QE-V50 Meterials Thickness: ≤0.5mm stainless steel strip; ≤0.6mm galvanized strip; ≤0.7mm aluminum strip. Features: 1. It use lever and parallel pressure to bend sharp and round angle with precise folding postion. 2. It can bend metal strip below height 50mm,thickness 0.5mm. 3. The pressure point can be adjusted according to material thickness which make it easy to make perfect metal channel letters Details: Application:
Ships to United States
24 Inch Manual Precision Rotary Paper Trimmer Blade
Item Code: CS-I-002-BL
24 Inch Manual Precision Rotary Paper Trimmer Blade Name: tungsten steel blade Process: manganese steel casting Inner diameter: 14mm Outer diameter: 49 mm Manual measurement, there is 1-2mm error To be used for 24 Inch Manual Precision Rotary Paper Trimmer: CS-I-002
Ships to United States
Manual Sausage Caulking Gun, 20 oz, 18:1 Thrust
Item Code: CS-YX-JQ-001
Manual Sausage Caulking Gun, 20 oz, 18:1 Thrust Specification Product length: 480mm Barrel length: 370mm Barrel diameter: 60mm Applicable : Structural adhesive/Sausage Caulking Material: Stainless steel Volume: 21 fl.oz
Ships to United States
1 Color Screen Printing Manual Screen Printing Equipment
Item Code: SPM-TJ-SPE-ZMD
1 Color Screen Printing Manual Screen Printing Equipment Features: This machine is specially designed for one color T-shirt screen printing because of its dedicated T-shirt pallet which can guarantee the accurate positioning and good printing effect. It can also be applied to printing on
Ships to United States
48 Inch Manual Large Format Acrylic Cutter with Support Stand
Item Code: CS-JXHY-MT-05
Description: The Mug Press is a great tool for applying your digital images onto sublimation coating mugs. Set up and print a digital image onto transfer paper using your favorite image manipulation software program, and then use the Mug Press to heat and transfer the image onto the substrate. The main benefits of the Mug Press is how quickly the image is transferred, the easy-to-use digital control panel and thumbscrew pressure adjustments. Specification: Voltage: 110V/220V Power: 450W Transfer Temperature: 250°C Control Mode: LCD automatic control Transfer Mug Size: 11oz Color: Silver Package Size: 44*25*32cm Gross Weight: 5.5kg Components and functions: ①Clean the mug surface, cut the image as per your design, printing size about height 9cm, length 20cm. ②Wrap the mug with the cut image, Make the image in the central and make it symmetrical both sides; Stick the paper with thermal tape. ③Put the mug in the center of heating mat. ④Adjust the pressure ball for printing mugs, not too tight, or too loose and close the handle. ⑤Turn on power, adjust the gauge time about 200S-300S, temp about 180℃-200℃. ⑥Press Time counting down button, the machine will sound an alarm automatically when reaching time, turn off power, take out the mug from the heating mat. ⑦Peal off the paper. Put the mug S L O W L Y into cool water, then see a photo mug is well done by yourself!
Ships to United States
Mutoh VJ-1204 / VJ-1304 / VJ-1604 / VJ-1604W / VJ-1608 Printhead (DX5) - DF-49684
Item Code: PRH-MUT-002
Mutoh VJ-1204 / VJ-1304 / VJ-1604 / VJ-1604W / VJ-1608 Printhead (DX5) - DF-49684 This printhead is suitable for the Mutoh ValueJet printer series. It has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. This printhead is
Ships to United States
Original Mutoh Drafstation RJ-900C / RJ-901C DX5 Printhead - DG-44246
Item Code: PRH-MUT-003
Original Mutoh Drafstation RJ-900C / RJ-901C DX5 Printhead - DG-44246 To be used with: MUTOH RJ-900 / RJ-900C (Drafstation) / RJ-901C (Drafstation Pro) / RJ-900X (Drafstation) Note: DG-44246 replacing DF-49029 Attention: 1. The printhead is required to be installed by professional
Ships to United States
100 pcs Foam Cleaning Swabs for Epson / Roland / Mimaki / Mutoh Inkjet Printers 5" Long
Item Code: ACC-ROL-043
100 pcs Foam Cleaning Swabs for Epson / Roland / Mimaki / Mutoh Inkjet Printers 5" Long Printer Compatibility: All Epson, Roland, Mimaki, Mutoh, XAAR, Konica, Seiko, Spectra Inkjet Printers. Ink type: Solvent, ECO-Solvent and Water-based Net weight: 207g/package Manufacturer: Ving
Ships to United States
