Cart 
Order Tracking
9mm Snap Off Utility Knife Blade for Tajima Small Size Craft Knife Cutter
Item Code: SIC-ZG-MG-016
scrape plastic surfaces to reach enough depth to snap apart. • Blade made from high quality tool steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. • The blade can be retracted into the holder
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 56mm Length, OEM
Item Code: CS-ROLAND-BH56
Blade Holder for Roland Vinyl Cutter, 56mm Length, OEM Features: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm • Length
Ships to United States
Cutting Guard Strip L10m W8mm Protection Replacement for Redsail Vinyl Cutter
Item Code: CS-RS-CGS01
. • Please cover the surface of the guard strip with sellotape. What's the cutting guard strip for? The cutting guard strip is used on the cutting plotter or vinyl cutter to protect the machine and the blade from being damaged. Without the strip, the cutting plotter will be badly scratched by
Ships to United States
Carriage Ribbon Flat Cable Assy for Redsail Vinyl Cutter RS720C, 410mm Soft Steel Wire Ruler Cable
Item Code: CS-RS-RFC410
Length: 410mm Space between: 1.25-12P To be used with: Redsail Vinyl Cutter RS720C Please check your old one and make sure it is the same as what we sell.
Ships to United States
Cutting Plotter Carriage Belt for Redsail RS1360C Vinyl Cutter Plotter MXL1170, W=0.9mm L=2926mm
Item Code: CS-RS-BMXL1170
resistant, aging resistant, ozone resistant, crazing resistant. To be used with: Redsail vinyl cutter RS1360C Application:
Ships to United States
Control Panel Control Decal with Button Board for Redsail Vinyl Plotting Cutter
Item Code: CS-RS-CP01
To be used with: Redsail Vinyl Cutter RS720C,RS800C,RS1120C,RS1360C. Application:
Ships to United States
15mm Belt Width Timing Synchronous Pulley for CO2 Laser Cutter, Dia. 12mm, 24 Teeth
Item Code: CS-BP-HTD-3M-12
To be used with: Dahua, Yueming, Boye, and Argus Sunic, etc. Laser engraving and cutting machine. 24 tooth gears, aluminium alloy
Ships to United States
30 Degree ANNA Vinyl Cutter Compatible Blade for Vinyl Cutting, 5pcs/pack, OEM
Item Code: RCCB-ANNA30-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; • Higher hardness(HRA93), greater strength(4200N/mm2, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color;• Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Specification: Cutting thickness: 0.25mm Diameter: 2mm(0.8") Length: 23mm(0.91") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91,5HRA Rockwell Breaking strength: 4000-4200N/mm2 Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc.
Ships to United States
Carriage Ribbon Flat Cable Assy for Redsail Vinyl Cutter RS1360C, 710mm Soft Steel Wire Ruler Cable
Item Code: CS-RS-RFC710
Length: 710mm Space between: 1.25-12P To be used with: Redsail Vinyl Cutter RS1360C Please check your old one and make sure it is the same as what we sell.
Ships to United States
Soft Ruler Measuring Tool For Redsail Vinyl Cutting Plotter Cutter RS1360C
Item Code: CS-RS-RU1360
Description: • Length: 1360mm • Original Redsail vinyl cutting plotter soft ruler, the width is about 2cm. • The scale is on one side only. • There with glue on the back of soft ruler, could be paste into the cutting plotter directly. To be used with: Redsail vinyl cutter
Ships to United States
Carriage Ribbon Flat Cable Assy for Redsail Vinyl Cutter RS800C, 436mm Soft Steel Wire Ruler Cable
Item Code: CS-RS-RFC436
Length: 436mm Space between: 1.25-12P To be used with: Redsail Vinyl Cutter RS800C Please check your old one and make sure it is the same as what we sell.
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-XJG-150300DT-P700
edge, small kerfs width and little heat effect. Open design series: 1) Fiber laser cutting is the fastest process for thin sheet metal. 2) "Clean cut" surface quality. 3) Reflective materials aluminum also can be cut with ease. 4) Parts process cost is very low. Equipment Character and
Ships to United States
Cutting Plotter Carriage Belt for Redsail RS800C Vinyl Cutter Plotter MXL810, W=0.9mm L=2024mm
Item Code: CS-RS-BMXL810
, heat resistant, aging resistant, ozone resistant, crazing resistant. To be used with: Redsail vinyl cutter RS800C Application:
Ships to United States
Soft Ruler Measuring Tool For Redsail Vinyl Cutting Plotter Cutter RS720C
Item Code: CS-RS-RU720
Description: • Length: 720 mm • Original Redsail Vinyl cutting plotter soft ruler, the width is about 2cm. • The scale is on one side only. • There with glue on the back of soft ruler, could be paste into the cutting plotter directly . To be used with: Redsail Vinyl cutting plotter RS720C. Tips: This item is also can be used in other brand cutting plotter with same feed paper width.
Ships to United States
Soft Ruler Measuring Tool For Redsail Vinyl Cutting Plotter Cutter RS1120C
Item Code: CS-RS-RU1120
Description: • Length: 1120 mm • Original Redsail vinyl cutting plotter soft ruler, the width is about 2cm. • The scale is on one side only. • There with glue on the back of soft ruler, could be paste into the cutting plotter directly. To be used with: Redsail vinyl cutter
Ships to United States
Carriage Ribbon Flat Cable Assy for Redsail Vinyl Cutter RS1120C, 605mm Soft Steel Wire Ruler Cable
Item Code: CS-RS-RFC605
Length: 605mm Space between: 1.25-12P To be used with: Redsail Vinyl Cutter RS1120C Please check your old one and make sure it is the same as what we sell.
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet, Close Design
Item Code: LCM-XJG-150300JH-P700C
laser generator, the first laser generator supplier in the world, famous for strong fiber laser power mode, stable optical fiber laser point. With strong laser power , better cutting capacity of the laser equipment Use OEM Precitec Laser Cutting Head, full sealed design, ensure long lifetime
Ships to United States
Cutting Plotter Carriage Belt for Redsail RS1120C Vinyl Cutter Plotter MXL910, W=0.9mm L=2274mm
Item Code: CS-RS-BMXL910
, heat resistant, aging resistant, ozone resistant, crazing resistant. To be used with: Redsail vinyl cutter RS1120C Application:
Ships to United States
49" SIGNKEY Vinyl Sign Cutter for Diamond Grade Reflective Films
Item Code: CPM-SK-1350F
prism (harder) and have highly flexible and sticky back-adhesive.The 49" Vinyl Sign Cutter for Diamond Grade Reflective Films is designed to resolve the problem as it has reasonably stronger frame,special Carriage and Tool carrier,etc.Beside,the machine can also cut brown paper of 1mm thick and
Ships to United States
Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu TC Series Vinyl Cutter
Item Code: CS-LY-PRA02
Pinch Roller Assembly Pressure Wheel Frame Spare Parts For Liyu TC Series Vinyl Cutter Product Details: Description: • With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability. • The dual-spring set makes it easily to adjust
Ships to United States
US Stock, CALCA Professional Rotary Trimmer 36 Inch Manual Paper Cutter For Office Home School
Item Code: CS-I-003-US
of the hob Fixed Hole For Blade Change Easy to remove the blade in the tool head Usages: Check the blade position before using the device. The blade must be close to the edge of the knife rest. If the blade is in the slot, it cannot be used for cutting. Packing: This rotary paper cutter trimmer
Ships to United States
Soft Ruler Measuring Tool For Redsail Vinyl Cutting Plotter Cutter RS800C
Item Code: CS-RS-RU800
Description: • Length: 800 mm • Original Redsail Vinyl cutting plotter soft ruler, the width is about 2cm. • The scale is on one side only. • There with glue on the back of soft ruler, could be paste into the cutting plotter directly. To be used with: Redsail Vinyl cutting plotter RS800C. Tips: This item is also can be used in other brand cutting plotter with same feed paper width.
Ships to United States
