H-E Parts EPSON WF-5113 Printhead Manifold / Adapter
Item Code: ACC-EPS-533
H-E Parts EPSON WF-5113 Printhead Manifold / Adapter Printer Compatibility: Epson WF-5113 / WF-5110 Manufacturer: H-E Parts
Ships to United States
USB to Serial RS232 Adapter CH341SER Chipset Cable
Item Code: CS-RS-OT02
; Supports Remote wakeup and power management • Provides a 96 byte buffer for each upstream and downstream data transfer • Easy Installation Compatibility/Requirements: Windows XP/2000/98/98SE/vista/win7 Mac OS 8.6 or Higher Available USB port 1.0/1.1
Ships to United States
USB to Serial RS232 Adapter FTDI Chipset Cable
Item Code: CS-RS-OT01
; Supports automatic handshake mode • USB full speed communication and Bus Powered • Single Cable USB to Serial communication • Supports up to 1 Mbps data transfer rate • Supports Automatic handshake mode • Supports Remote wakeup and power management • Provides a 96 byte buffer
Ships to United States
8mm turns 6mm Silicone Hose Adapter for Laser Machine
Item Code: CS-TL-15
8mm turns 6mm Silicone Hose Adapter for Laser Machine Minimum barb diameter: 8mm Maximum barb diameter: 6mm
Ships to United States
10mm turns 8mm Silicone Hose Adapter for Laser Machine
Item Code: CS-TL-13
10mm turns 8mm Silicone Hose Adapter for Laser Machine Minimum barb diameter: 8mm Maximum barb diameter: 10mm
Ships to United States
10mm turns 6mm Silicone Hose Adapter for Laser Machine
Item Code: CS-TL-14
10mm turns 6mm Silicone Hose Adapter for Laser Machine Minimum barb diameter: 6mm Maximum barb diameter: 10mm
Ships to United States
Roland Power Board Maintenance Service
Item Code: ACC-ROL-PBMS
Roland Power Board Maintenance Service Learn more: http://www.sign-in-china.com/catalogs/295/printer_boards_maintenance_service.html
Ships to United States
GZ-3208 Printer Power Board
Item Code: ACC-GZ-031
GZ-3208 Printer Power Board Printer compatibility: GZ-3208 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
GZ-3212 Printer Power Board
Item Code: ACC-GZ-032
GZ-3212 Printer Power Board Printer compatibility: GZ-3212 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
Mimaki Power Board Maintenance Service
Item Code: ACC-MIM-PBMS
Mimaki Power Board Maintenance Service Learn more: http://www.sign-in-china.com/catalogs/295/printer_boards_maintenance_service.html
Ships to United States
Myjet 3216 Ink Supply Cable-20pin, 600cm
Item Code: ACC-MJT-035
Myjet 3216 Ink Supply Cable-20pin, 600cm This ink supply cable which connects the carriage board to the servo board is suitable for Myjet 3216 printers. Cable length: 600cm long and has 20 pins. Manufacturer: Myjet
Ships to United States
Gongzheng Large Format Printer Supply Ink Board
Item Code: ACC-GZ-027
Gongzheng Large Format Printer Supply Ink Board Printer compatibility: All Gongzheng Large Format Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board
Ships to United States
GZ-3212 Printer Supply Ink Board
Item Code: ACC-GZ-030
GZ-3212 Printer Supply Ink Board Printer compatibility: GZ-3212 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
GZ-3208 Printer Supply Ink Board
Item Code: ACC-GZ-029
GZ-3208 Printer Supply Ink Board Printer compatibility: GZ-3208 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
Comprehensive Gallery Wrapped Canvas Painting Bracket Supply
Item Code: PF-FL-1
Feature: Frameless painting is a new product, it is got rid of the shackles of traditional paintings' border, meet the simple standard of publics. Our main customers are some of the studios, to help them develop new frameless painting business. The users only need to purchase our bracket and installed with their own pictures, then they got the DIY paintings. The advantages of frameless painting lath: • Less deformation, less warpage • High flexural strength and impact strength • Excellent physical properties, uniformly materials, without Dehydration problems Details: Preparation of materials: Pictures (photographic paper, canvas, high-precision wove photographic paper, cross stitch, etc.), Frame Kit (contains wooden frame lath x4, trapezoid inserts x4, U-shaped nail x4), and a utility knife. Step1. Turn over the picture, put the four wooden frame laths on the picture. As shown in figure (corner to corner, narrow side inward, wide-side outward and coincide with edge of the picture,) make sure the size of picture is correct. Step2. Fixed the wooden frame laths with yellow tape, keep the relative position of the picture and wooden frame laths. Step3. Turn the wooden frame laths erected and remove the back-paper of double-side tape, keep the position, press laths to tightly-stick the picture; the other three sides in the same way. Step4. Turn the wooden frame laths erected; fold the angle section of picture into the middle of two laths, fixed the laths with U-shaped nails; the other three corner in the same way. Step5. Embedded the four trapezoid inserts in the groove of four corners respectively. Complete. Installation schematic on hard cement wall: Step1. Install the no trace nail: up on the hooks of nail, selecting a proper position of the wall, and then gently knock the nail into the wall with hammer. Step2. Install the frameless painting: hanging the painting on the nail, move around to adjust the balance; if there are multi-paintings, you may need to accurately measure the position of nails. Application:
Ships to United States
US Stock-6 pcs Generic Roland DX4 Solvent Printhead Manifold / Adapter
Item Code: ACC-ROL-054-R-US-6P
Customers in Other Countries Please Click Here to Order:/products/57/dx4 roland_ solvent_printhead manifold_adapter.html Generic Roland DX4 Solvent Printhead Manifold / Adapter Printer Compatibility: Roland HiFiJet Pro II FJ-540 / FJ-740. Roland SolJet ProII Roland SJ-540 / SJ-645 EX
Ships to United States
Original DX5 Epson Stylus Pro 4800 / 7800 / 9800 Water-based Printhead Manifold / Adapter
Item Code: ACC-EPS-038-1
Original DX5 Epson Stylus Pro 4800 / 7800 / 9800 Water-based Printhead Manifold / Adapter Printer Compatibility: Epson Stylus Pro 4400 / 4800 / 7400 / 7800 / 9400 / 9800 / 4880 / 9880 / 7880 / 9450 / 3880 / Epson Stylus Photo R1800 / R2400 / R4000 Net Weight: 36g/pc Packing size
Ships to United States
Generic Roland FJ-740 / SJ-740 / VP-540 Big Damper with Resized Adapter
Item Code: ACC-MIM-001-R
Big Damper with Resized Adapter for Roland FJSJ--740 / XC-540 Printer Compatibility: Roland FJ-740 / FJ-540 / VP-300 / VP-540 / XC-540 / XJ-640 / XJ-740 / RS-640 / SJ-740 / SJ-540 / SJ-640 / SJ-1000 / SJ-1045e / LEJ-640 Manufacturer: Ving Parts Ink Type: For both solvent/eco solvent and water-based
Ships to United States
Generic Mouth VJ-1604 / RJ-900C Big Damper with Resized Adapter
Item Code: ACC-MIM-001-WT
Big Damper with Resized Adapter Mouth VJ-1604 / RJ-900C Printer Compatibility: Mutoh VJ-1304 / VJ-1604 / VJ-1604W / RJ-900C / RJ-900X Mutoh Rock Hopper I/II, Mutoh FalconII, Mutoh Falcon Plus Manufacturer: Ving Parts Ink Type: For both solvent/eco solvent and water-based ink. Net Weight
Ships to United States
N Series Collet Chuck Adapter for CNC Engraving Tool Drill Bit 6.35mm to 4mm
Item Code: CS-CTN-CH635-4
Features: • Adopt high quality spring steel material, good flexibility and wear resistance. • High precision, tight and stable clamping. • Work with 6mm collet, such as drills, boring knife, engraver, reamer etc. • Help to adjust the shank of the CNC engraving bits from 6.35mm to 4mm. • Outer Diameter: 6.35mm • Inner Diameter: 4mm Details: Usage: Process:
Ships to United States
N Series Collet Chuck Adapter for CNC Engraving Tool Drill Bit 6mm to 4mm
Item Code: CS-CTN-CH6-4
Features: • Adopt high quality spring steel material, good flexibility and wear resistance. • High precision, tight and stable clamping. • Work with 6mm collet, such as drills, boring knife, engraver, reamer etc. • Help to adjust the shank of the CNC engraving bits from 6mm to 4mm. • Outer Diameter: 6mm • Inner Diameter: 4mm Details: Usage: Process:
Ships to United States
N Series Collet Chuck Adapter for CNC Engraving Tool Drill Bit 6mm to 3.175mm
Item Code: CS-CTN-CH6-3175
Features: • Adopt high quality spring steel material, good flexibility and wear resistance. • High precision, tight and stable clamping. • Work with 6mm collet, such as drills, boring knife, engraver, reamer etc. • Help to adjust the shank of the CNC engraving bits from 6mm to 3.175mm. • Outer Diameter: 6mm • Inner Diameter: 3.175mm Details: Usage: Process:
Ships to United States