Cart 
Order Tracking
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds
Ships to United States
400W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY400A
welding wires, fitting different kinds of imported mold materials, Polishing and texturing can also be realized. • Processing cost can be greatly saved in terms of materials, labor and time consuming. Specifications: Laser Power: 400W Laser Source: Pulsed Nd:YAG 8*155mm Pulse Width: 0.3-20ms
Ships to United States
All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software
Item Code: LMM-ED-F30
working table for users. With this design, the ED-F30 achieves low failure rate, low maintenance cost, and ease of use and maximum productivity. Specification Model LMM-ED-F30-US Fiber Laser Source JPT Output Power 30W Laser wavelength 1064nm Modulation frequency
Ships to United States
300W General Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300B
1.1 Working principle The working principle of this laser machine is to take the advantages of the laser deposit welding and uses the technology of collective and spot welding with high heat of laser. It can effectively treat the welding defects of tiny parts and conduct repair work. This technical
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
CALCA 300W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm
Ships to United States
US Stock, Ving 300W 2 Optical Path Laser Welder for Fine Metal Channel Letter Making
Item Code: LWM-WF300HZ-S-US
Welding Function: This laser welding machine adopts high peak-value power supply and controller made by ourselves. It can easily weld those materials such as aluminum, copper, etc. that difficult for other brands machines. (For welding aluminum, please choose the model 400W) Regular combination and
Ships to United States
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-QD2-6040
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System This machine can transfer patterns and texts which are printed by sublimating ink or solvent ink onto fabrics like cotton, linen, chemical fabric, and nylon and ceramics through heat transfer
Ships to United States
500W Optical Fiber Transmission Handheld Laser Welding Machine as Used for Making Molds
Item Code: LWM-CY-WF500
-plated cavity is used to resist corrosion and high temperature, and its life span is (8-10) years. Xenon lamp life is more than 8 million times. Specifications: 1) Laser source: Nd3+: YAG bar Φ8 x 155mm 2) Laser wavelength: 1064nm 3) Laser power: 500W 4) Laser Tube Qty’: 2 pcs 5) Single-pulse
Ships to United States
3000mW Laser Engraving Machine DIY Print Carving with Wireless APP Control
Item Code: LCM-DK-8-KZ-01
no excess residue and perfect, also more safe to prevent fire. 5.490 x 490 high Resolution Print, Soft material can print out the 3D and the gradient effect. 6.Lone time use, NEJE developed the professional power IC and radiator, Carving time will last much longer than other laser and more stable. 7
Ships to United States
Silicone Ring Kit Seal Washer Gasket for Laser Focus Lens Dia.19mm / 20mm
Item Code: CS-TL-01
Description: This silicone ring kit seal washer gasket used for laser focus lens Dia.19mm / 20mm, protect the laser focus lens against slip and scratch.
Ships to United States
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Item Code: CS-AWC-NC
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System To be used with: Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Ships to United States
20W MOPA M6 Fiber Laser Marking Machine Engraving Aluminum Black Color Marking
Item Code: LMM-MAX-MOPA
, adjustable and freely controllable. engraving effect is more exquisite, calibration more accurate. The switch jack shown above, from top to next, is: USB data cable interface to connect the computer, spare jack, pedal interface, Rotary interface, power cable interface(General Power). Fiber Laser Marking
Ships to United States
F-theta Lens Adjust Mount M79-M85 For Laser Marking Machine
Item Code: CS-LENS-1064-AM
F-theta Lens Adjust Mount M79-M85 For Laser Marking Machine Features: 1. This F-theta Lens Adjust Mount is made of Aluminum, fine texture with good surface treatment 2. Durable to use, Long service life 3. Easy to install and remove 4. Application: Solve the problem of size inconsistency between F
Ships to United States
US Stock 49" x 98" (1250mm x 2500mm) Laser Cutting Machine
Item Code: LCM-EGL-G1325-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/25653/49_quot_x_98_quot_1250mm_x_2500mm_laser_cutting
Ships to United States
12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA
Item Code: LCM-KH-320-40W
12" x 8" 40W CO2 Laser Engraver and Cutter Worktable FDA This 40W CO2 Laser Engraver integrates a lot of upgraded and advanced technologies, all of which guarantee the good quality of high precise and speed. It is a suitable machine to process various nonmetal materials including: acrylic
Ships to United States
600W Industrial Air Purifier Used For Laser Processing Wood Dust & Gas Exhaust
Item Code: CS-DMYH-AP700
, long-term exchanges and cooperation with foreign advanced technology enterprises. 3. Imported fans, multi-level filtration system, to ensure efficient purification. Production is rigorous and efficient. The quality of equipment is guaranteed. 1. The factory has introduced a new high-power fiber laser
Ships to United States
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines
Item Code: LCM-KH-750-100W
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines TThis Laser Engraver is equipped with EFR 100W CO2 Laser Tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP
Ships to United States
20W High Precision Fiber Laser Marking & Engraving Machine Metal & Non-metal
Item Code: LMM-XQL-20W
20W Fiber Laser Marking Machine for Metal Stainless Steel Plastic Includes computer with Pre-install software This 20W fiber laser marking machine is designed for high-speed laser marking on metal and plastic. APPLICABLE INDUSTRIES: Mobile phone keypad, Plastic translucent keys, Electronic
Ships to United States
CALCA 200W Desktop Jewelry Laser Welding Machine for Metal Gold Silver Jewelry(60 Joules)
Item Code: LWM-CY-W200ZM
Features: 1.Energy, pulse width, frequency and focus can be adjusted within a wide range to achieve different welding effects 2.Ceramic reflector used in the laser pump chamber is imported, which is corrosion resistant, high temperature resistant, high electrical/optical conversion. 3.World-leading
Ships to United States
US Stock, 130W CO2 Laser Cutting and Engraving Machine X-1309
Item Code: LCM-KT-X-1309-US
power (cutting vs. engraving) and the order of cutting. This allows you to easily combine cutting and engraving in a single job, for faster processing and more precise control of the laser. Half-toned photographs and other images can be laser-engraved by “printing” directly from inside your
Ships to United States
