Cart 
Order Tracking
US Stock, 130W CO2 Sealed Glass Laser Tube (1650mm Length, 80mm Diameter)
Item Code: CS-LT-KT165080-130-US
US Stock-130W CO2 Glass Laser Tube (1650mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 130W. Maximum 5, 000 Hours Life Span ￠3.15" x 65" L (￠80mm Dimeter x 1650mm L) Good mode, high power, cost effective, suitable for advertising
Ships to United States
US Stock-80W CO2 Sealed Glass Laser Tube (1250mm Length, 80mm Diameter)
Item Code: CS-LT-KT125080-80-US
US Stock-80W CO2 Glass Laser Tube (1250mm Length, 80mm Diameter), Water Cooling for CO2 Laser Engraving Cutter Its maximum power can reach 90W. Maximum 5, 000 Hours Life Span ￠3.15" x 49" L (￠80mm x 1250mm L) Good mode, high power, cost effective, suitable for advertising industry and
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-XJG-150300DT-P700
Laser Cutting Machine integrates optical, mechanical and electrical in one, which adopts laser technology, computer control technology and high-performance CNC laser power system to process all kinds of metal sheet at high speed, high accurate, high efficiently cutting. Its products have smooth
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet, Close Design
Item Code: LCM-XJG-150300JH-P700C
conditions; Laser Metal cutting Sample: Factory real photos: International Certificate: In metal cutting industry, the metal process group have developed small and medium size metal cutting machine, large area laser cutting machine and combine metal cutting and marking functions in one machine
Ships to United States
Motorized Up and Down Patform for LEM-RS-X700 Series Laser Engraver
Item Code: CS-LM-MUD02
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
59" x 118" 1530 1000W IPG Fiber Laser Cutting Machine
Item Code: LCM-XJG-150300JH-P1000C
cutting machine, large area laser cutting machine and combine metal cutting and marking functions in one machine, these three serial 10 type of machine have widely used into Sign marking, electronic switch marking, sheet metal cutting, cabinet producing, spectacle frame cutting, metal craft, machine tools
Ships to United States
49" x 98" (1250mm x 2500mm) Laser Cutting Machine
Item Code: LCM-EGL-G1325
The G-1325 CO2 laser cutting machine offers high precision and large format cutting solution for acrylics, wood, cardboard and other materials. 130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). Features Large Format Working Area
Ships to United States
US Stock, 59 x 118" 1530 1000W Fiber Laser Cutting Machine
Item Code: LCM-XQL-3015-US
Customers in Other Countries Please Click Here to Order: /products/26832/59_x_118_1530_1000w_fiber_laser_cutting_machine.html 59 x 118" 1530 1000W Fiber Laser Cutting Machine for Metal Laser Cutting Machine integrates optical, mechanical and electrical in one, which adopts laser
Ships to United States
US Stock-Exhaust Dust and Smoke Blower Fan for Laser Engraving and Cutting Machine, 550W, 110V
Item Code: CS-CZ-TD550-220-PKU-US
Description: The exhaust fan is typically used for mechanical equipment. Because when the laser machine is working, it can produce smoke or smell (smell diffent producted by diffent materials), so user need to use the exhaust fan to extract the smoke and smeel out of room. Ensure a comfortable
Ships to United States
50mA Ammeter Analog Amp Panel Meter Current for CO2 Laser Engraving Cutting Machine
Item Code: CS-LASER-50A
Specification: Model: 85C1 Test Range: 0~50mA Accuracy: Class 2.5 Weight: 112g Size: 64 x 56 x 52mm Work temperature: -40 ~ +70°C Mounting: Vertical Mounting
Ships to United States
Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100
EFR F4, ZS1450 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-25
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (25mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-17
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (17mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm
Item Code: CS-BLT-2388-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm
Ships to United States
400W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY400A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm which
Ships to United States
300W General Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300B
1.1 Working principle The working principle of this laser machine is to take the advantages of the laser deposit welding and uses the technology of collective and spot welding with high heat of laser. It can effectively treat the welding defects of tiny parts and conduct repair work. This technical
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
CALCA 300W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm
Ships to United States
US Stock, Ving 300W 2 Optical Path Laser Welder for Fine Metal Channel Letter Making
Item Code: LWM-WF300HZ-S-US
Welding Function: This laser welding machine adopts high peak-value power supply and controller made by ourselves. It can easily weld those materials such as aluminum, copper, etc. that difficult for other brands machines. (For welding aluminum, please choose the model 400W) Regular combination and
Ships to United States
