Cart 
Order Tracking
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-XJG-150300DT-P700
Germany Rexroth guide rail, Germany Atlanta Rack and Pinon high speed, large torgue stable and reliable performance, high precision, convenient, maintenance, longer lifetime CNC system PC control, CNC laser cutting professional USA PMAC cutting software Programmable Multi-Axis Controller, compatible
Ships to United States
59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet, Close Design
Item Code: LCM-XJG-150300JH-P700C
Atlanta Rack and Pinon high speed, large torgue stable and reliable performance, high precision, convenient, maintenance, longer lifetime CNC system PC control, CNC laser cutting professional USA PMAC cutting software Programmable Multi-Axis Controller, compatible with closed -loop magnetic rule system
Ships to United States
Motorized Up and Down Patform for LEM-RS-X700 Series Laser Engraver
Item Code: CS-LM-MUD02
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
59" x 118" 1530 1000W IPG Fiber Laser Cutting Machine
Item Code: LCM-XJG-150300JH-P1000C
Atlanta Rack and Pinon high speed, large torgue stable and reliable performance, high precision, convenient, maintenance, longer lifetime CNC system PC control, CNC laser cutting professional USA PMAC cutting software Programmable Multi-Axis Controller, compatible with closed -loop magnetic rule system
Ships to United States
49" x 98" (1250mm x 2500mm) Laser Cutting Machine
Item Code: LCM-EGL-G1325
produced in America in order to produce a high quality and consistent laser beam across the entire working area. This achieves a better cutting and engraving quality. Visual Control System This G-1325 is equipped with a high performance control system featuring a user friendly visual UI panel. By
Ships to United States
US Stock, 59 x 118" 1530 1000W Fiber Laser Cutting Machine
Item Code: LCM-XQL-3015-US
technology, computer control technology and high-performance CNC laser power system to process all kinds of metal sheet at high speed, high accurate, high efficiently cutting. Its products have smooth edge, small kerfs width and little heat effect. The efficiency of fiber laser is higher than CO2 Laser. The
Ships to United States
US Stock-Exhaust Dust and Smoke Blower Fan for Laser Engraving and Cutting Machine, 550W, 110V
Item Code: CS-CZ-TD550-220-PKU-US
Description: The exhaust fan is typically used for mechanical equipment. Because when the laser machine is working, it can produce smoke or smell (smell diffent producted by diffent materials), so user need to use the exhaust fan to extract the smoke and smeel out of room. Ensure a comfortable
Ships to United States
50mA Ammeter Analog Amp Panel Meter Current for CO2 Laser Engraving Cutting Machine
Item Code: CS-LASER-50A
Specification: Model: 85C1 Test Range: 0~50mA Accuracy: Class 2.5 Weight: 112g Size: 64 x 56 x 52mm Work temperature: -40 ~ +70°C Mounting: Vertical Mounting
Ships to United States
Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100
EFR F4, ZS1450 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-25
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (25mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-17
machine with Spiral cutting, bandwidth 17 mm of timing belt, such as Boye, Yueming, Argus, Golden Laser, Redsail, Senfeng, Shenhui, Jinqiang, York laser, Gweike, Hanma laser, Ruijie, Bodor Laser and so on. This Open ended single sided timing belt is similar to general performance synchronous belt
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm
Item Code: CS-BLT-2388-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm
Ships to United States
400W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY400A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm which
Ships to United States
All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software
Item Code: LMM-ED-F30
All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software Includes computer with Pre-install software The ED-F30 has an all-in-one design, with fiber laser, galvanometer, Accessory axis, control system, industrial PC included and integrated, and provides a
Ships to United States
300W General Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300B
1.1 Working principle The working principle of this laser machine is to take the advantages of the laser deposit welding and uses the technology of collective and spot welding with high heat of laser. It can effectively treat the welding defects of tiny parts and conduct repair work. This technical
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
CALCA 300W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm
Ships to United States
US Stock, Ving 300W 2 Optical Path Laser Welder for Fine Metal Channel Letter Making
Item Code: LWM-WF300HZ-S-US
Welding Function: This laser welding machine adopts high peak-value power supply and controller made by ourselves. It can easily weld those materials such as aluminum, copper, etc. that difficult for other brands machines. (For welding aluminum, please choose the model 400W) Regular combination and
Ships to United States
