Cart 
Order Tracking
Ving Tools Pen Holder for Redsail Vinyl Cutter
Item Code: CS-RS-PH01
Description: • Redsail vinyl cutter original pen holder; • High quality and extra long service life; • Best quality in reasonable price. Specification: • Diameter(Clamp):12mm • Length(Clamp to down): 30mm • Overall Length: 44mm
Ships to United States
Silica Gel Pinch Roller Wheel for Redsail Vinyl Cutter
Item Code: CS-RS-PRW
Silica Gel Pinch Roller Wheel for Redsail Vinyl Cutter • Width: 12mm • Hole diameter: 3mm • Outer diameter: 16mm • Covered with new rubber. • With a new bearing inside the roller. • Please measure your old pinch roller before you purchase. To be used with
Ships to United States
Carriage for SC Series of Liyu Vinyl Cutter
Item Code: CS-LY-CA01
Description: • Balanced design makes a balance force on the two ends. • Please check if your old one is the same as this item. • To be used with: LIYU vinyl cutter SC631E,SC801E,SC1261E.
Ships to United States
Silica Gel Pinch Roller Wheel for Liyu Vinyl Cutter
Item Code: CS-LY-PRW
Silica Gel Pinch Roller Wheel for Liyu Vinyl Cutter • Width: 11mm • Hole diameter: 3mm • Outer diameter: 16mm • Covered with new rubber. • With a new bearing inside the roller. • Please measure your old pinch roller before you purchase. Features: The center part of
Ships to United States
Big Blade Holder for Liyu Vinyl Cutter, 55mm Length, Original
Item Code: CS-LIYU-BH14
Big Blade Holder for Liyu Vinyl Cutter, 55mm Length, Original Using high quality metallic materials, high accuracy and precision. Description: • High quality and extra long service life; • High quality metallic materials; • Screw adjustment; • Double bearings
Ships to United States
Material Roll Vinyl Film Finishing Tool Kit (Clips, Slitter, Squeegee)
Item Code: CS-BS-MOC
This Vinyl Finishing & Storaging Tools sets contains: • 2 pieces Ving Tools 3M Squeegee (3M ABS material blue Squeegees last longer than other squeegees, their rigid material the edge stays smooth and clean too when you slide the Squeegees on vinyl or other materials.The 3M Blue squeegee
Ships to United States
Cutting Guard Strip L720mm W8mm for Redsail Vinyl Cutter RS720C
Item Code: CS-RS-CGS720
Description: • 8mm width, 720mm length (Without gum) • Cutting strips are reversible for maximum usage. • You can cut into a shorter lengths. Please note that the strip has No adhesive, you need to buy extra double-sided tapes. To be used with: Redsail vinyl cutter RS720C
Ships to United States
L880mm W8mm Cutting Guard Strip for Liyu Vinyl Cutter SC801
Item Code: CS-LY-SC801
size: LxWxH: 34.6" x 0.3" x 0.1" (880 x 8 x 1mm) To be used with: Liyu vinyl cutter SC801 Remarks: Original Attention please: • The stress of the cutting plotter should be adjusted appropriately to avoid cutting through papers and damaging the guard strip. • If the guard strip
Ships to United States
Cutting Guard Strip L1360mm W8mm for Redsail Vinyl Cutter RS1360C
Item Code: CS-RS-CGS1360
Description: • 8mm width, 1360mm length (Without gum) • Cutting strips are reversible for maximum usage. • You can cut into a shorter lengths. Please note that the strip has No adhesive, you need to buy extra double-sided tapes. To be used with: Redsail vinyl cutter RS1360C
Ships to United States
L1350mm W8mm Cutting Guard Strip for Liyu Vinyl Cutter TC1261
Item Code: CS-LY-TC1261
or vinyl cutter to protect the machine and the blade from being damaged. Without the strip, the cutting plotter will be badly scratched by the sharp blade and the blade will be abrased as well when the cutting plotter is working. How to stick the cutting guard strip on your machine? First you
Ships to United States
L720mm W8mm Cutting Guard Strip for Liyu Vinyl Cutter SC631
Item Code: CS-LY-SC631
size: LxWxH: 28.3" x 0.3" x 0.1" (720 x 8 x 1mm) To be used with: Liyu Vinyl Cutter SC631 Remarks: Original Attention please: • The stress of the cutting plotter should be adjusted appropriately to avoid cutting through papers and damaging the guard strip. • If the guard strip
Ships to United States
3M Knifeless Tape Vinyl Cutting Tape 3.5mm x 50m
Item Code: BS-3M-KT01
3M Knifeless Tape Vinyl Cutting Tape 3.5mm x 50m 3M Knifeless Tape has been specifically designed to operate with the stretchable adhesive films that are laid over contoured shapes with curved edges and contains novel features that allow the tape to turn easily and both directions. 1. Can be used
Ships to United States
The hop-pocket for 48" Vinyl Cutter Plotter
Item Code: CPM-RS-1360C-HP
The hop-pocket is a necessary accessory for the cutting plotter. To be used with: Redsail vinyl cutter RS1360C
Ships to United States
The Stand for 48" Vinyl Cutter Plotter
Item Code: CPM-RS-1360-S
The stand is for CPM-RS-1360C vinyl cutting plotter. The structure of floor stand:
Ships to United States
Cutting Guard Strip L800mm W8mm for Redsail Vinyl Cutter RS800C
Item Code: CS-RS-CGS800
Description: • 8mm width, 800mm length (Without gum) • Cutting strips are reversible for maximum usage. • You can cut into a shorter lengths. Please note that the strip has No adhesive, you need to buy extra double-sided tapes. To be used with: Redsail vinyl cutter RS800C
Ships to United States
160cm Width Vinyl Film Precisely Roll Cutting Slitter Machine
Item Code: CS-FQ750-160
operate. With a motorized core shaft and single-blade, the slitter could be used to cut self-adhesive vinyl, double-sided adhesive tape, paper, application tape, film, fabric, foam, flex banner and awning. Roller slitter is different from `other` slitters because it can cut materials precisely that means
Ships to United States
Cutting Guard Strip L1120mm W8mm for Redsail Vinyl Cutter RS1120C
Item Code: CS-RS-CGS1120
Description: • 8mm width, 1120mm length (Without gum) • Cutting strips are reversible for maximum usage. • You can cut into a shorter lengths. Please note that the strip has No adhesive, you need to buy extra double-sided tapes. To be used with: Redsail vinyl cutter RS1120C
Ships to United States
Carriage for SC Series Old Version of Liyu Vinyl Cutter
Item Code: CS-LY-CA02
Description: • Balanced design makes a balance force on the two ends. • Please check if your old one is the same as this item. • SC series has two versions, old and new. This version is the old version with different interfaces
Ships to United States
48" MULTI-Mark with Professional Sensor Head Vinyl Cutter
Item Code: CPM-FS-A-S48
48" MULTI-MARK with Professional Sensor Head Vinyl Cutter Features: 1. High strength aluminum alloy frame, elegant appearance with streamline design 2. 10bd quieter than ordinary cutting plotter, speeds reach 800mm/S 3. Multi-mark point with subsection supported to guarantee long media scan
Ships to United States
Carriage for Redsail Vinyl Plotting Cutter with Contour Cut Function
Item Code: CS-RS-CA02
Description: • 1 pc of Redsail carriage assembly with a cover. • Balanced design makes a balance force on the two ends. • Both blade holder and pen holder can be installed. To be used with: Redsail Vinyl Cutter with Contour Cut Function, such as RS360C / RS450C / RS500C
Ships to United States
Opto Electric Limit Switch for the Redsail Vinyl Cutter, Original
Item Code: CS-RS-MBC-S
Features: • Opto Electric Limit Switch for mainboard type is L6129 V1.2C of Redsail. • Elaborate design and layers detection to ensure the quality of each chip. The high quality will ensure every line patency. Please check the type before placing an order. To be used with: Redsail Vinyl
Ships to United States
24" MULTI-MARK with Professional Sensor Head Vinyl Cutter
Item Code: CPM-FS-A-S24
24" MULTI-MARK with Professional Sensor Head Vinyl Cutter Features: 1. High strength aluminum alloy frame, elegant appearance with streamline design 2. 10bd quieter than ordinary cutting plotter, speeds reach 800mm / s 3. Multi-mark point with subsection supported to guarantee long media scan
Ships to United States
Electrical Sensor/Leaf Switch for the Redsail Vinyl Cutter, Original
Item Code: CS-RS-MBD-S
Vinyl Cutter RS360C, RS450C, RS500C, RS720C, RS800C, RS1120C, RS1360C, CRS1600C, RS1780C Vinyl Cutter which is produced after 2014, Augest.
Ships to United States
Copam/ZenCut Vinyl Cutter Green Ballpoint Pen Holder, Original
Item Code: CS-COP-PH01
Copam/ZenCut Vinyl Cutter Green Ballpoint Pen Holder, Original Ballpoint pen holder for COPAM vinyl sign cutters. Fits all models: CP-2500, CP-3050, CP-3500, CP-4050 and CP-4500. This pen holder will also work on US Cutter's Zen Cut Green vinyl cutter. The disposable refill can be replaced
Ships to United States
