Cart 
Order Tracking
Ving Tools 45 Degree Pcut Vinyl Cutter Blades, 5pcs/pack
Item Code: RCCB-PCUT45-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; • Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life; • Domestic topmost hose configuration better protects knifepoint from damage. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Aluminum Profile Metal Channel Letter Rounded Corner Bender Bending Tools
Item Code: CS-HD-BC05
Bender Diameter: 20mm (0.79"), 30mm (1.18") & 43mm (1.69") Processing Material: Aluminum It can bend aluminium 0.8mm Details: • A set containing a tripod, a rounded frame, three different specifications of the drum; • Height is twelve centimeters, suitable for normal trim needs; • Tripod has forty-five degrees and a ninety degrees; • Tripod and circular shelves have set aside mounting holes, when using, please fixed. Usage: 1. Engraving acrylic panel; 2. Slotted aluminum (or other metal trim materials), after bending, toward the edge of the acrylic panel began around the word; 3. Encountered arc, according to the panel, put the sidebar on the top of the roller (Depending on the size of the arc to select a different drum), grasp both sides of the sidebar, pulling the roll or directly pressure to fit the curvature; 4. Scroll to roughly arc, alignment panel, continue around the edges, you can take a small rubber hammer finishing; 5. For triangular prism, slotted and then use, or small-angle extrusion, bending. Step1: Step2:
Ships to United States
Ving Tools Pen Holder for Redsail Vinyl Cutter
Item Code: CS-RS-PH01
Description: • Redsail vinyl cutter original pen holder; • High quality and extra long service life; • Best quality in reasonable price. Specification: • Diameter(Clamp):12mm • Length(Clamp to down): 30mm • Overall Length: 44mm
Ships to United States
Window Film Tint Tools Mini Squeegee Scraper Kit
Item Code: BS-3000699
Window Film Tint Tools Mini Squeegee Scraper Kit Description: 100% brand new and high quality Features: Odd shape, the sharp blade can adjust to various shape or space corner Durable squeegee made up with fine PP Scrape off the bubbles downright under the film; prevent glass car body and film
Ships to United States
Window Film Tint Tools Tint Squeegee Scraper Car For Auto
Item Code: BS-3000698
Window Film Tint Tools Tint Squeegee Scraper Car For Auto Features: 100% brand new and high quality We adopt a material PP to make it more pliable and durable, thus it will not go out of shape easily, the blade is smooth straightedge or in well streamlined. It can remove the bubble under the film
Ships to United States
Window Tint Tools Film Squeegee Paddle Handle Scraper
Item Code: BS-3000701
Window Tint Tools Film Auto Bulldozer Squeegee 15'' x 5.95'' Paddle Handle Scraper Description: Just like handled squeegee, the Automotive Handled Bulldozer Squeegee helps professional tinted to clean up and get at the place difficult to reach while applying films. Designed with an ergonomic
Ships to United States
Auto Paddle Squeegee Car Wrapping Window Film Tint Tools
Item Code: BS-3000700
Auto Paddle Squeegee Car Wrapping Window Film Tint Tools Description: Excellent Tool For Rear and Front Window Installs Condition: 100% Brand new & High Quality Product: Front glass hard squeegee Material: plastic Blade Length: 3" Total Length: 15" Application: Rear window clean
Ships to United States
Soldering Iron Tips for New Electric Soldering Iron Welding Tools
Item Code: CS-ESI-WM-02
Soldering Iron Tips for New Electric Soldering Iron Welding Tools To be used with CS-ESI-WM-01, CS-ESI-WM-04 Handhold Welding Tool Electric Soldering Iron for Welding Metal Channel Letters Length: 93mm Soldering Tip Out-diameter: 12mm Soldering Tip In-diameter: 7mm Gross Weight: 70g
Ships to United States
Flat Bottom CNC Router Bit Engraving Tools for Metal
Item Code: EC-JS3
give better processing effect. And the more fine tungsten steel’s particle is, the sharp bits of the blade polished as a result for better processing effect. Usage Tips: It is important that you choose a tip size when ordering your engraving tools. The tip size will determine how wide your
Ships to United States
Ving Tools Pen Holder for Liyu SC Series Vinyl Cutter
Item Code: CS-LY-PH01
Pen and Holder for SC Series of Liyu Vinyl Cutter To be used for: Vinyl Cutter- SC/TC/FC/HF series Remarks: OEM Economy is applicable, the function upgrade, contour cutting
Ships to United States
21 tools in one Decorative Film Special Tool Box
Item Code: CS-TGHZ-B003
21 tools in one Decorative Film Special Tool Box Features Aluminum alloy frame, wear-resistant and pressure-resistant; Brushed silver panel, beautiful and elegant; Sealed and moisture-proof; Aluminum alloy material, light weight, not easy to corrode, easy to carry; Contains 22-piece film
Ships to United States
Cap Heat Press Kit
Item Code: CS-HTS-002
Description: This machine can be used for transferring non-cotton caps (like polyester tops and chemical fibers etc.) as well as pure cotton caps. Sublimation paper and sublimation ink are suitable for the transferring of the non-cotton cap. The process is firstly to print the picture you want in the sublimation paper by the piezoelectric printer (like Epson printer), then put the paper smoothly on the cap, and lastly to transfer the picture to the cap through heating by heat transfer system, color fixation is must to finish the process. If you want to transfer pure cotton cap by heat transfer printing, you have to use special transfer paper fit for cotton clothes. Clothes in light color must be transformed by using the sublimation paper special for the light color ones, or vice versa. Then to print the picture into `the` sublimation paper on which there is thin film for printing pictures, and put the printed paper smoothly on the cap to be heated by the heat transfer machine. Finally to transfer the pictured film to the cap, you will finish the whole process. Feel free to transfer when using another kind of special transfer film, the transferring is not restricted by the color of the materials. Firstly to print the picture into `the` special transfer film by using the printer containing general water-proof ink, and then to transfer the pictured film to the cap through heating, you will get your transferring finished. Quotation: Chemical cap fibers system: 256USD/set. Pure cotton caps system: 270USD/set. Including: . One heat transfer machine. . One EPSON Printer(Epson R330 with voltage of 220V). . One set of the continuous-ink-supply system including heat transfer ink 100ml in six-color. . One parcel of heat transfer paper (100pcs/parcel) Remarks: . $46/parcel(100pcs/parcel), $80/parcel (100pcs/parcel) . Sublimation ink: Referable price: $72/L . Feel free when using the heat transfer film, which is not restricted by color and materials. The price can be found in the following site: http://www.sign-in-china.com/catalogs/139/Heat_transfer_film.html. . The difference between the cap transfer system for chemical fibers and that for pure cotton is nothing but the ink and the transfer paper. . We have many different kinds of cap transfer machine available for you. You can have a clear understanding of the quotation for the machines in the following website: http://www.sign-in-china.com/catalogs/142/T_shirt_heat_transfer_machine.html. The operating steps: . Plug in the machine and turn on the switch. . Strongly take hold of the handle to lay open the heating panel right. (Attention: the whole machine must be backed up by sturdy earth wire. . Adjust the thermostat temperature to the wanted temperature ( generally 150℃～200℃) . Adjust the timer to the wanted time (usually 5seconds to 20 seconds) . Pull up the pressure handle and you will find the heating panel, then pull out the worktable and put the T-shirt to be transferred on the worktable smoothly. Put the cap on the beneath pyrography panel, and then put the pictured transfer paper on the T-shirt. (Attention: the front and back of the heat transfer pyrography papers, should better warm up the part to be transferred to make the surface smooth, making the transferring a high-quality job.), then you put back the heating panel and pull down the pressure handle strongly until the end. . When the temperature reaches the setting figure, it will alarm and the heating panel will stop working automatically, then you should pull out the worktable. . Strip away the pyrography paper and the process is finished. Precautions: When transferring, if the pyrography papers are suitable for stripping away when cooled down, you have to wipe the pyrography paper by using the blackboard eraser and then wait 5 to ten seconds to strip it away. Or you have to strip away the pyrography papers right away when the heating is up, only the perfect time and temperature and pressure can make the transferring a good job. Also the transferring is also subject to the thickness of materials and the pyrography paper. As the original ink cartridges is water-based ink from `the` printer suppliers, which do not offer the sublimation ink cartridge; you have to do some changes to the original ink cartridges, getting rid of the original ink and injecting the sublimation ink. We suggest you use the continuous ink supply to avoid the complex process of injecting ink to the ink cartridges. This way you will be free from `the` repeating work for injection when the ink is using out every time. What you need to do is just inject the sublimation ink into `the` ink bottle of the system All kinds of the pyrography papers have to be tested to be qualified before mass production. Voltage: 220/110V Working Temperature: Normal
Ships to United States
Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 5.7"(145mm)
Item Code: CS-DMCLAB-002
Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 5.7"(145mm) For bending angles of metal sheet, stainless steel, aluminum extrusions and various metal strips Description: • This metal letters bending tool is made to solve problems of time-consuming and laborious in
Ships to United States
Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 3.9"(100mm)
Item Code: CS-DMCLAB-001
Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 3.9"(100mm) For bending angles of metal sheet, stainless steel, aluminum extrusions and various metal strips Description: • This metal letters bending tool is made to solve problems of time-consuming and laborious in
Ships to United States
US Stock, Dual-axis Metal Channel Letter Angle Bending Tools, Bending Width 3.9"(100mm)
Item Code: CS-DMCLAB-001-US
Customers in Other Countries Please Click Here to Order: /products/16042/dual axis_metal channel_letter angle bender bending tools_bending width 100mm.html Dual-axis Metal Channel Letter Angle Bender Bending Tools, Bending Width 3.9"(100mm) For bending angles of metal sheet, stainless
Ships to United States
New Silk Screen Printing Pallet Bracket Screen Printing Tools DIY Equipment
Item Code: SPM-TJ-009002
Pallet Bracket for Silk Screen Printing Press Screen Printer Support · Pallet Bracket · Good Quality With Low Cost · Screen Printing Pallet Bracket · This set of pallet bracket can be used easily, you can use it to retrofit your own custom-made pallets. The bracket can
Ships to United States
Pneumatic Bending Slot Cutting Machine Tools for Metal Channel Letters 5.7"(145mm)
Item Code: CS-HD-BC02-EZ
Description: Pneumatic Clamp Max Thickness of Sheet can be bended: iron 1.0 mm, aluminum: 1.2 mm, stainless steel: 0.8mm, effective flanging height is 145mm. No bounce Packing Size: 500mm x 440mm x 310mm Gross Weight: 27kg/set
Ships to United States
Ving Tools 45 Degree Small Roland Compatible Vinyl Cutter Blades, AA Grade 5pcs/ pack
Item Code: RCCB-ROLAND45-AA
Description: Roland OEM blades are designed to replace your original blade for your Roland vinyl cutter. The 45 degree blades are meant for lighter vinyl or standard vinyl cutting. When your blade wears out, keep these replacement blades nearby so that you don't lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Roland blade holder to keep blades in place and adjust depth for varying vinyls. The 45 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 45 degree for standard cutting. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. It can be used with Roland GX24, GX300, GX400, GX500, GX640, SP-540, SP-540I, SP-540V, SP-300, SP-300I, SP-300V, VP-300, VP-300I, VP-300V, VP-540, VP-540V, VP-540I vinyl cutters. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500 Note: From the technical level, using a 60 degree blade on everyday cutting is a waste, less of the blade's cutting area is used, and blade life is wasted. The more horizontal cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer. So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
Ships to United States
Ving Tools 60 Degree Small Roland Vinyl Cutter Blades, 3A Grade 5pcs/pack
Item Code: RCCB-ROLAND60-3A
Description: Roland OEM blades are designed to replace your original blade for your Roland® vinyl cutter. The 60 degree blades are meant for cutting thick materials such as fashion flock. When your blade wears out, keep these replacement blades nearby so that you don't lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Roland® Blade Holder to keep blades in place and adjust depth for varying vinyls. The 60 degree blades are the best at cutting large letters and shapes great with reflective vinyl and magnet material. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 60 degree for cutting thick vinyl materials. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. It can be used with Roland GX24, GX300, GX400, GX500, GX640, SP-540, SP-540I, SP-540V, SP-300, SP-300I, SP-300V, VP-300, VP-300I, VP-300V, VP-540, VP-540V, VP-540I vinyl cutters. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500
Ships to United States
Ving Tools 60 Degree Big Graphtec Vinyl Cutter Compatible Blades, 5pcs/pack OEM
Item Code: RCCB-GR60-BI
rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Used for: It can be used in clothing proof press and ordinary
Ships to United States
