Cart 
Order Tracking
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY20-110V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY10-110V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY10-220V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2/S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY20-220V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
CO2 Laser Engraving Controller System RuiDa Controller RDLC320-A for CO2 Laser Cutting Machine
Item Code: CS-LC-RD320
photoelectric isolated input, TTL level Advantages: 1, The Board as a whole has better resistance to high pressure and antistatic ability 2, One-way 24V power supply (compatible with 36V, but not recommended); can save the cost of machine manufacturer 3, Multi-way general large-current IO, convenient for
Ships to United States
51" x 35" 1390 Laser Cutting Machine, with RECI S4 100W-130W Laser
Item Code: LCM-RJ-1390-100W
Description: Materials that can be cut: Non-metal materials, such as bamboo, plexiglass, acrylic, rubber, paper, and so on. With the improved linear guide, this machine has a perfectly cutting or engraving precision. Feature: • Professional design for client in different industry, reasonable
Ships to United States
EFR F8 150W CO2 Sealed Laser Tube 1850mmL for Laser Engraving Machine
Item Code: CS-LT-F8-150W
Tips: • We will send a new one freely if the tube is broken during transit. • Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Model Length (mm) Diameter (mm) Output Power (W) Max Power (W) Current (mA) Catalyst Lifespan Warranty Period F8 1850±20 Ø80±2 150 165 30 Yes 6000h 300days Feature: F8 CO2 Laser Tube is launched in October 2011 with 3 years development, its' working life is up to 6000hours, the single tube power is up to 165W. The laser output is stable. The discharge tube is catalyst coated, the working life is much increased. Compared to similar product, the tube body length is shorter, the laser beam mode is better, the cutting speed is higher. • Stability: The discharge glass tube body is imported from Germany. The laser beam mode is up to TEM00. The power is table. It is competitive for industrial application. • Power: The power is 30% higher than other laser tube with same length. • Long Life: The catalyst coating on discharge tube with unique electrode processing makes the laser out put is more stable, avoid power weaken during long time working. Product upgrade: • Use USA IIVI lens and windows & Germany Schott glass tube as discharge tube, performance, reliability, consistency is higher than other similar product. • High voltage side uses a ceramic water cooling jacket, reduce problems compared to glass cap which is made by hand.Ceramic heat dissipation better. • The silicone pipe is once molded product, water flow more smoothly. • Improved production processing, reduce gas leakage. • New machining electrode makes discharge more stable. Product details: Application: Warranty: 300 Days • Within 90 days from exit work date, if the user operates same as our manual and the output power is less than 80% of the rated power, we will provide new one instead of the defected one. The replaced laser tube has same new laser tube warranty. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged changed, we will not be responsible. • From 90 days to 300 days, if the user operates same as our manual and the output power is less than 80% of the rated power, we will repair or provide new one instead of the defected one according to fact. The single transportation freight will be afforded by buyer. When the laser tube structure is damaged changed, we will not be responsible.
Ships to United States
Reci Low Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine
Item Code: CS-RC-L
Reci Low Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine Description: The product is featured as easy operation and light weight. The elasticity of the product is capable to absorb the shaking caused by the transportation and protect the laser tube. The distance
Ships to United States
Rotary Axis Attachment, 3-Jaws Chuck Rotary for CO2 Laser Engraving Machine (X700)
Item Code: CS-LM-RT02
Rotary Axis Attachment, 3-Jaws Chuck Rotary for CO2 Laser Engraving Machine Adjustable 3-Jaw Precision Precision marking and engraving cylindrical objects. Laser process small pens, mugs, tumblers, flashlights and much more. Used for X700 Laser Engraver, 2 phase rotary axis stepper drives
Ships to United States
Reci High Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine
Item Code: CS-RC-H
Reci High Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine Description: The product, adopting ABS environment-friendly plastic, can be adjusted horizontally and vertically which is featured as stable structure and having patent. The distance between the cross
Ships to United States
White USB Dongle KEY/Softdog for Leetro MPC6535/MPC6525/MPC6565/CO2 Laser Machine
Item Code: CS-LC-W35
Laser Machine White USB Dongle/USB KEY for Leetro MPC6515,MPC6525,MPC6535 Color: white Package: carton box HS code: 8466939000 Usage: Leetro MPC6515/6525/MPC6535/6565 controller(lasercut software)
Ships to United States
CO2 Power supply for 50W CO2 Laser Engraving Cutting Machine, 110V
Item Code: CS-PS-SF50W-110V
Description: Laser power supply 50W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Medium production power level for deeper, high speed engraving and slightly thick cutting operations. Category: Laser Power Supply Model: 50W Input Voltage: 110V Output Current: 23m(A
Ships to United States
CO2 Power supply for 60W CO2 Laser Engraving Cutting Machine, 110V
Item Code: CS-PS-SF60W-110V
Description: Laser power supply 60W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Category: Laser Power Supply Model: 60W Input Voltage: 110V Output Current: 23m(A) Output Voltage: 35k(V) Certificate: ISO9001 Output Power: 60W Specification: Model CS-PS-SF60W-110V
Ships to United States
CO2 Power supply for 80W CO2 Laser Engraving Cutting Machine, 220V
Item Code: CS-PS-SF80W-220V
Description: Laser power supply 50W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Medium production power level for deeper, high speed engraving and slightly thick cutting operations. Category: Laser Power Supply Model: 80W Input Voltage: 220V Output Current: 30m(A
Ships to United States
Ving 800W 150L Portable Acrylic Polishing Machine, Oxygen Hydrogen Flame Generator, 2 Gas Torches free, 220V
Item Code: APM-H260-220V
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. 800W Portable Oxygen Hydrogen Flame Generator Acrylic Polishing Machine, 150L 2 Gas
Ships to United States
800MM 50W CO2 Glass Laser Tube for CO2 Laser Engraving Cutting Machine
Item Code: CS-LT-JN50
) Power stability: ± 5% Used for: CO2 Laser Engraving Cutting Machine. Usages Using conditions of laser tube 1. Ambient temperature: 10 - 40°C; 2. Relative humidity: 45% - 85%. Cooling conditions 1. Cooling water temperature: 15 - 30°C in summer, in other seasons 20°C is
Ships to United States
US Stock, Ving Multifunction Automatic CNC Channel Letter Bending Machine(with notching and flanging function)
Item Code: MBM-BENDER-CLASSIC-US
Remark: The air pump is not included, please prepare it by yourself.The air pump should be above 0.6Mpa. Automatic Multi-functional CNC Metal Channel Letter Bending Machine BENDER CLASSIC CNC metal channel letter bender is the machine with full function: auto feeding, auto notching, auto flanging
Ships to United States
Senfeng 130W Laser Power Supply for CO2 Laser Engraving Machine, 220V
Item Code: CS-PS-SF130W-220V
Description: Laser power supply 130W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Category: Laser Power Supply Model: 130W Input Voltage: 220V Output Current: 38m(A) Output Voltage: 50k(V) Output Power: 130W Specification: Model CS-PS-SF130W-220V AC Input
Ships to United States
Ving Parts Universal Oxyhydrogen Gas Torch Flame Gun with 3 Nozzles for HHO Polishing Welding Machine
Item Code: CS-HG-FG-I
Universal Oxyhydrogen Gas Torch Flame Gun with 3 Nozzles for HHO Polishing Welding Machine Oxyhydrogen gas torch flame gun for 75-95L/H gas flow Description: This oxyhydrogen gas torch flame gun is used for all the brands of torch polishers for acrylic polishing. Specification: Speed Adjustment
Ships to United States
CO2 Power supply for 80W CO2 Laser Engraving Cutting Machine, 110V
Item Code: CS-PS-SF80W-110V
Description: Laser power supply 50W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Medium production power level for deeper, high speed engraving and slightly thick cutting operations. Category: Laser Power Supply Model: 80W Input Voltage: 110V~220V Output Current: 30m
Ships to United States
CO2 Power supply for 60W CO2 Laser Engraving Cutting Machine, 220V
Item Code: CS-PS-SF60W-220V
Description: Laser power supply 60W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Category: Laser Power Supply Model: 60W Input Voltage: 220V Output Current: 23m(A) Output Voltage: 35k(V) Certificate: ISO9001 Output Power: 60W Specification: Model CS-PS-SF60W
Ships to United States
CO2 Power supply for 50W CO2 Laser Engraving Cutting Machine, 220V
Item Code: CS-PS-SF50W-220V
Description: Laser power supply 50W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Medium production power level for deeper, high speed engraving and slightly thick cutting operations. Category: Laser Power Supply Model: 50W Input Voltage: 220V Output Current: 23m(A
Ships to United States
94"(2400mm) Quartz Heater Tube for Auto Acrylic bender Bending Machine
Item Code: ABM-HT-2400A
94"(2400mm) Quartz Heater Tube for Automatic Acrylic Plastic PVC Bending Machine This Quartz Heater tube is One replacement of Bending Machine, also it is a consumable. This Quartz Heater tube is Only used with ZD and JW series. Specifications Model: ABM-HT-2400A Diameter: 18mm Length
Ships to United States
US Stock-Exhaust Dust and Smoke Blower Fan for Laser Engraving and Cutting Machine, 750W, 110V
Item Code: CS-CZ-TD750-110-PKU-US
Description: The exhaust fan is typically used for mechanical equipment. Because when the laser machine is working, it can produce smoke or smell (smell diffent producted by diffent materials), so user need to use the exhaust fan to extract the smoke and smeel out of room. Ensure a comfortable
Ships to United States
