Cart 
Order Tracking
Tajima High Quality Acrylic PVC Board Hook Knife Cutter, Arched Acrylic Hook Knife
Item Code: SIC-ZG-MG-010
Feature: • Arched hook knife for easy holding. • Plastic handle and steel blade made in Japan. • Blade setter with auto-lock function to ensure safe. • The blade can be retracted into the holder after use. • Safety lock system achieves, more safe application and low fatigue in use. • Hook shaped cutting blade is designed to scrape plastic surfaces to reach enough depth to snap apart. • Blade made from high quality tool steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Firstly, cut the acrlic board with the hook craft knife and there is a straight scratch line on the board. Secondly, along the scratch line to break off the board. If the board is a large one, cut the board make the scratch line along the table line, and then press the board by one hand along the scratch line to break it off. Notes: The hook knife is also applicable for cutting PS board and PVC board. The arched acrylic board hook knife is mostly used for cutting acrylic, plexiglass or plastic materials, such as acrylic board, PVC board, Plastic board. However, the simple design makes it easy for personal DIY projects as well. Package:
Ships to United States
Original Pinch Roller Assembly for Redsail RS-360C / RS-720C / RS-1120C / RS-1360C Vinyl Cutter
Item Code: CS-RS-PRA01
Description: Original Pinch Roller Assembly for Redsail RS-360C / RS-720C / RS-1120C / RS-1360C Vinyl Cutter • With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability. • The dual-spring set makes it easily to adjust the pressure
Ships to United States
A3 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky
Item Code: SIC-CM-CP-A3
• Non Slip. • Sticky Printed Grid • Durable and Convenient. • Comes with marking grids for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the
Ships to United States
Ving Tools Small Blade Holder for Graphtec CB09 Plotter Vinyl Cutter, OEM
Item Code: CS-GR-BHS-I
Small Blade Holder for Graphtec CB09 Plotter Vinyl Cutter, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life • Diameter(Clamp)14mm • Diameter(Blade) 0.9mm • Length(Clamp
Ships to United States
Ving Tools Blade Holder for Mimaki Vinyl Cutter, 51mm Length, OEM
Item Code: CS-MM-BH01
Blade Holder for Mimaki Vinyl Cutter, 51mm Length, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 11.5mm • Diameter(Blade): 1.5mm
Ships to United States
Ving Tools 45 Degree Summa Compatible Vinyl Cutter Blades, 5pcs/pack, OEM
Item Code: RCCB-SUMMA45-C
Feature: • Knifepoint is made from ultrafine grain size cemented carbide; • Higher wear resistance and good durability; • Higher hardness, greater strength, better abrasion resistance and durability; • 30°, 45°and 60°are in different color; • Through fine grinding and polishing, high precision and good quality, without any problem of peeling, blistering and rusting; • Domestic topmost hose configuration better protects knifepoint from damage. Specification: Cutting thickness: 0.25mm Diameter: 1.5mm(0.6") Length: 19mm(0.75") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91, 5HRA Rockwell Breaking strength: 4000-4200N/mm2 The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc. Package:
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY20-220V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
Ving Tools 45 Degree Big Graphtec Vinyl Cutter Compatible Blades, 5pcs/pack OEM
Item Code: RCCB-GR45-BI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm
Ships to United States
Ving Tools 60 Degree Pcut Vinyl Plotter Cutter Blades, 5pcs/pack
Item Code: RCCB-PCUT60-C
damage your material; • The cutting speed is extremely quick with extra long life; • Domestic topmost hose configuration better protects knifepoint from damage. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use
Ships to United States
Ving Tools 60 Degree Summa Compatible Vinyl Cutter Blades, 5pcs/pack, OEM
Item Code: RCCB-SUMMA60-C
Feature: • Knifepoint is made from ultrafine grain size cemented carbide; • Higher wear resistance and good durability; • Higher hardness, greater strength, better abrasion resistance and durability; • 30°, 45°and 60°are in different color; • Through fine grinding and polishing, high precision and good quality, without any problem of peeling, blistering and rusting; • Domestic topmost hose configuration better protects knifepoint from damage. Specification: Cutting thickness: 0.25mm Diameter: 1.5mm(0.6") Length: 19mm(0.75") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91, 5HRA Rockwell Breaking strength: 4000-4200N/mm2 The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc. Package:
Ships to United States
Ving Tools 30 Degree Small Graphtec Compatible Vinyl Cutter Blades 5pcs/pack, OEM
Item Code: RCCB-GR30-SI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM
Item Code: CS-ROLAND-BH565
Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM Features: • Brand new • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 11.5mm • Diameter(Blade): 2mm &bull
Ships to United States
Ving Tools 30 Degree IOLINE Compatible Vinyl Cutter Blade, 5pcs/pack, OEM
Item Code: RCCB-IOLINE30-C
your material; • The cutting speed is extremely quick with extra long life. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the
Ships to United States
Ving Tools 30 Degree Summa Compatible Vinyl Cutter Blades, 5pcs/pack, OEM
Item Code: RCCB-SUMMA30-C
Feature: • Knifepoint is made from ultrafine grain size cemented carbide; • Higher wear resistance and good durability; • Higher hardness, greater strength, better abrasion resistance and durability; • 30°, 45°and 60°are in different color; • Through fine grinding and polishing, high precision and good quality, without any problem of peeling, blistering and rusting; • Domestic topmost hose configuration better protects knifepoint from damage. Specification: Cutting thickness: 0.25mm Diameter: 1.5mm(0.6") Length: 19mm(0.75") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91, 5HRA Rockwell Breaking strength: 4000-4200N/mm2 The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc. Package:
Ships to United States
18mm Tajima High Quality Rachet Lock Snap Off Utility Knife Cutter
Item Code: SIC-ZG-MG-005
Description: • Material: Out covering: plastic; Blade: fine steel; • Blade setter with auto-lock function to ensure safe; • High quality blades used, easy to replace; • Professional cutter in comfortable streamline style is perfect composing of plastic and metal. &bull
Ships to United States
Ving Tools 30 Degree Big Graphtec Vinyl Cutter Compatible Blades, 5pcs/pack OEM
Item Code: RCCB-GR30-BI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm
Ships to United States
Ving Tools 30 Degree Pcut Vinyl Plotter Cutter Blades, 5pcs/pack
Item Code: RCCB-PCUT30-C
your material; • The cutting speed is extremely quick with extra long life; • Domestic topmost hose configuration better protects knifepoint from damage. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use
Ships to United States
Ving Tools Blade Holder for Summa Vinyl Cutter, 45.5mm Length, OEM
Item Code: CS-SUMMA-BH01
Blade Holder for Summa Vinyl Cutter, 45.5mm Length, OEM High precision, good clamping performance and perfect in workmanship! Description: • Adopted imported high-quality aluminum alloy and imported resin material, and produced by elaborate machines; • High precision, durable and extra
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM
Item Code: CS-ROLAND-BH55
Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM Features: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • .High quality, extra long life Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm &bull
Ships to United States
Generic Roland SC-545EX Pad Cutter (Length 1500mm, Width 8mm) - 22635116
Item Code: ACC-ROL-311
Generic Roland CJ-540 Pad, Cutter - 22635116 Length 1500mm, Width 8mm Printer Compatibility: Roland CJ-540 / SC-540 / SC-545EX / XC-540 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM
Item Code: CS-ROLAND-BH60
Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 14mm • Diameter(Blade): 2mm
Ships to United States
A4 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky Printed Grid
Item Code: SIC-CM-CP-A4
for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the paper moving during work, it’s better to use the cutting mat because of the feature of cutting mat sticky
Ships to United States
Original Metal Blade Holder for Redsail Vinyl Cutter, 50.5mm Length
Item Code: CS-RS-BH02
Original Redsail Metal Blade Holder for Cutting Plotter Vinyl Cutter Sign Making Machine Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm • Length(Clamp to down): 28.5mm • Overall Length: 50.5mm Aluminum-precision vertical adjustment Double bearings, screw
Ships to United States
