Cart 
Order Tracking
US Stock,CALCA 51in x 35in 150W CO2 Laser Cutter FDA Certificate, with Auto - focus Function
Item Code: LCM-KH-1390-150W-US
The Products in US Stock Only Free Shipping to USA, Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/29715/51in_x_35in_150w_co2_laser_cutter_fda_certificate
Ships to United States
Ving Tools 60 Degree Big Graphtec Vinyl Cutter Compatible Blades, 5pcs/pack OEM
Item Code: RCCB-GR60-BI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm
Ships to United States
Ving Tools 45 Degree Small Roland Vinyl Cutter Compatible Blades, N Grade 5pcs/ pack
Item Code: RCCB-ROLAND45-N
Description: Roland OEM blades are designed to replace your original blade for your Roland vinyl cutter. The 45 degree blades are meant for lighter vinyl or standard vinyl cutting. When your blade wears out, keep these replacement blades nearby so that you don't lose time during job production
Ships to United States
51" x 35" 1390 Economical Laser Cutter, with Reci S6 130W-160W Laser
Item Code: LCM-RJ-1390-150W
Description: Materials that can be cut: Non-metal materials, such as bamboo, plexiglass, acrylic, rubber, paper, and so on. With the improved linear guide, this machine has a perfectly cutting or engraving precision. Feature: • Professional design for client in different industry, reasonable structure, pleased appearance & practical. • High strength & high stable mechanical structure composed of high precision mould, machine moved stable, in high speed & precision, back - open design convenient for material process & no limit for material length. • Adopt flight path design, special structure, little path deviation, high performance & easy adjustment. • Update USB offline control system & large memory capacity to improve work speed & efficiency. Advantage: • Avoid polishing, processing high speed, and high precision; • Glass viewing windows creating a safe enclosure for laser processing; • Original Singapore imported lens can greatly improve working efficiency and reduce cost; • Exhausting, absorbing and assistant blowing systems extend the life of the laser tube; • Aluminum strip shape platform can bear heavier materials, such as acrylic, wood and much more non - metal materials; • Large internal memory capacity improves the working speed with greater efficiency; • With a fine cutting effect and price advantage. Used for: • Advertising Industry: Acrylic, double color board & other advertising material engraving & cutting. • Leather Industry: Engraving & through - carving on leather & cloth. • Craft Industry: Engrave and cut on paper, wooden material, bamboo, leather, seashell & ivory material. • Model Industry: Cutting for architectural model, Aviation and navigation model, wooden toy. • Packaging Industry: Engrave & cut on rubber, composite board & Laser die board. • Engrave & cut in decoration industry & electronic appliance industry materials. Benefit: • 51" x 35" (1300mm x 900mm) working area • Up to 48'' IPS (1200mm / s) high working speed • Pass - through front and rear doors to accommodate long work pieces • Equipped with high quality water chiller CW5000 , which can prolong the lifespan of the laser tube and ensures a better engraving effect Details: Maximum Working Area: 51" x 35" (1300mm x 900mm) Maximum Cutting Speed: 24" (600mm) / s Maximum Engraving Speed: 48" (1200mm) / s Laser Power: Reci S6 CO2 glass laser tube 130W-160W (Normal lifespan: about 10000 working hours) Laser Type: Sealed - off Glass CO2 Laser, Wavelength: 10.6um Max. Cutting Thickness (Acrylic): ≤ 1" (25mm) Location Precision: < 0.01mm Power Supply: AC 110 or 220V ± 10%, 50Hz or 60Hz Control System and Driver: High Speed DSP control system, stepper motor, High subdivision driver Supported Format and Software: PLT, DST, DXF, BMP, AI, Support AutoCAD, Corel Draw output directly Light Path and Laser Head High quality Reci Brand Laser Power Source and Laser Tube, makes the laser machine has long usage. About Engraving Software (Leetro engraving software) • Advanced position compare output • Functionality provides perfect solution against the misplacement problem. Engraving speed up to 90m/min • Distinct look-ahead algorithm and track - fit algorithm • Highly enhanced the operating efficiency. Speed for cutting circles reaches 30 m / min • Advanced synchronous tracking control • Functionality ensures the synchronous changes of the laser power and the speed of laser head’s moving • No distortion in speedy cutting roundlet (diameter less than Ф3mm) • LaserCut5.3 can be embedded in CorelDraw and AutoCAD Edit Window Add Laser Process Menu in CorelDraw include: Laser output, Import DST file, Output file and Machine Set, shown as below: LaserCut 5.3 add AutoCAD laser procession menu. It includes: Laser output, Output file, Machine Set and Unite lines, dialog box appears as below: Why Choose This Machine? 1) At the same quality grade, this laser cutting machine’s price is better: a) This laser engraving and cutting machine are produced on large scale. b) We own advanced production equipment, high efficiency and low production cost, so we can provide you with the best price for machines. 2) At the same price level, our service is better: a) Before purchasing, please learn information of this machine through our website or ask question through Live Chat, our service staff will recommend the proper model to fit your demand best. b) After - sale, we guarantee the machine in 24 months dating from the delivery. During warranty period, if some parts are broken due to manufacturing defect, we will send you new ones to replace them by free cost. c) We will provide you free technical supporting during the whole lifespan of the machine. Usage: Easy to use this laser system solution, three-step operation 1.Download your images from your camera, CD-ROM, DVD disk or your client onto your computer 2.Design these pictures Edit your pictures, logos or letters through our engraving software. 3.Output edited pictures, letters, and engrave Place the materials on the worktable of laser engraver and start to engrave or cut. Perfect finished products
Ships to United States
CALCA Professional Rotary Trimmer 48 Inch Manual Paper Cutter For Office Home School
Item Code: CS-I-004
This 48 inch rotary paper cutter is all designed with automatically paper-fixing function. The automatically rotary blade makes the cutter sharp and durable. The scale indicating both centimeter and inch makes it more accurate more convenient more efficient and more applicable, avoiding the
Ships to United States
48" Vicsign Vinyl Cutter with CCD Camera, Full Auto Contour Cut Function
Item Code: CPM-HWQ-1200
48" Vicsign Vinyl Cutter with CCD Camera, Full Auto Contour Cut Function Description: HWQ 1200 vinyl cutter using stepper motor, can cut characters and do image contour cutting automatically. Supported software: signmaster Supported system: Vista, Win xp, Win7, Win8 Supported interface
Ships to United States
DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY13-220V
Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
Ving Tools 60 Degree Small Graphtec Compatible Vinyl Cutter Blades 5pcs/pack, OEM
Item Code: RCCB-GR60-SI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.
Ships to United States
Ving Tools Big Blade Holder for Graphtec CB15 Plotter Vinyl Cutter, OEM
Item Code: CS-GR-BHB-I
Big Blade Holder for Graphtec CB15 Plotter Vinyl Cutter, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life • Diameter(Clamp)14mm • Diameter(Blade) 1.5mm • Length(Clamp to
Ships to United States
Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter(4 x 10 x 14mm)
Item Code: CS-MIM-PRW
Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter Features: • The center part of roller is made by brass. • Please replace the old roller timely. • Please replace all old rollers at same time, the different friction coefficient of new and old roller will cause the deviating
Ships to United States
43" SIGNKEY Vinyl Sign Cutter with Automatic Contour Cut Function, Bluetooth Output
Item Code: CPM-SKA-1100C
43" SIGNKEY Vinyl Sign Cutter with Automatic Contour Cut Function, Bluetooth Output With such a fast, accurate and versatile vinyl cutter plotter, you can contour cut most any media pre - printed - from your choice of inkjet, solvent based and laser printer. Support CorelDraw output directly
Ships to United States
R10 10mm Rounder, Round Corner Punch, Paper,Card Photo Cartons Corner Trimmer Cutter, Plastic
Item Code: CS-C-001
Description: This corner trimmer adopts environmental protective design, convenient for carrying and operation. It can change the photos or name cards with right corners into the ones with round corners. It's convenient to operate and carry, it can cut the photos, name cards and others with right angle into the ones with round angle. Features: • Used to turn the right angle to round one. • for paper,photographs,and card up to 200gsm. • Easy to carry and operate. • Convenient to clean up the chips.Just uncover the transparent side. Specifications: Material: Stainless Steel & Plastic Modle: R10 Fillet radius after cutting: 10mm / 0.39" Size: 8.0cmx8.0mx3.2cm Color: Blue Warm tips: We do not suggest cutting materials beyond 200gsm,as it may not work so well. Details: Front View: Back View: Wastepaper Slot: Usage: Application: The plastic chamfering machine suitable for all kinds of photo paper or name paper. Card Corner Cutting： After Corner Cutting： Package:
Ships to United States
Safety Knife Wallpaper Cutter Wrapping Cutting Tool for Car Film Sticker Cutting
Item Code: CS-PT-A54
Features: This Safety Knife is made of Transparent material, can more accurate positioning,and easy to use. Detail:
Ships to United States
40 Inch Aluminum Alloy Large Format Paper Trimmer Cutter with Support Stand
Item Code: CS-M-001
This paper cutter not only applies to paper(thickness within 1mm) but also outdoor printing materials, such as KT board, PVC foam board, KAPA board(thickness within 8mm), etc. Its breadth is 40 inch and board dimension is 1180mm x 330mm (46" x 13"). Its material is aluminum alloy
Ships to United States
80 Inch Aluminum Alloy Large Format Paper Trimmer Cutter with Support Stand
Item Code: CS-M-003
This paper cutter not only applies to paper(thickness within 1mm) but also outdoor printing materials, such as KT board, PVC foam board, KAPA board(thickness within 8mm), etc. Its breadth is 80 inch and board dimension is 2180mm x 330mm (86" x 13"). Its material is aluminum alloy
Ships to United States
59" x 118" 1530 IPG Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-EZ-GL1530
59" x 118" 1530 IPG Fiber Laser Cutter for Metal Sheet Cutting CNC Fiber laser cutting machine is using fiber laser generator as light source. Fiber laser is newly developed in the world. It can output high energy density laser beam and gather on the surface of the work piece, which can
Ships to United States
DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY13-110V
Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 46.5mm Length, OEM
Item Code: CS-ROLAND-BH465
Blade Holder for Roland Vinyl Cutter, 46.5mm Length, OEM Brand new blade holder, aluminum alloy material, good quality and no deformation! Description: • Adopted imported high-quality aluminum alloy and imported resin material, and produced by elaborate machines; • High precision
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY20-110V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY10-110V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 110V, 60Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
Ving Tools 45 Degree Small Graphtec Compatible Vinyl Cutter Blades, 5pcs/pack OEM
Item Code: RCCB-GR45-SI
; • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.
Ships to United States
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137
Item Code: ACC-ROL-244
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137 Printer Compatibility: Roland SP-540V / SP-300 / VP-300 / SP-300V Package Size: 2.36" x 2.36" x 0.78" (60 x 60 x 20mm) Gross Weight: 8g Manufacturer: Ving Parts Part No.: 21545137 Warm tips：There
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY10-220V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2/S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
Tajima High Quality Acrylic PVC Board Hook Knife Cutter, Arched Acrylic Hook Knife
Item Code: SIC-ZG-MG-010
Feature: • Arched hook knife for easy holding. • Plastic handle and steel blade made in Japan. • Blade setter with auto-lock function to ensure safe. • The blade can be retracted into the holder after use. • Safety lock system achieves, more safe application and low fatigue in use. • Hook shaped cutting blade is designed to scrape plastic surfaces to reach enough depth to snap apart. • Blade made from high quality tool steel for higher abrasion resistance and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Firstly, cut the acrlic board with the hook craft knife and there is a straight scratch line on the board. Secondly, along the scratch line to break off the board. If the board is a large one, cut the board make the scratch line along the table line, and then press the board by one hand along the scratch line to break it off. Notes: The hook knife is also applicable for cutting PS board and PVC board. The arched acrylic board hook knife is mostly used for cutting acrylic, plexiglass or plastic materials, such as acrylic board, PVC board, Plastic board. However, the simple design makes it easy for personal DIY projects as well. Package:
Ships to United States
