Cart 
Order Tracking
Tabletop Precise 20" x 24" Vacuum UV Exposure Unit
Item Code: SPM-RD-MD5060
Tabletop Precise 20" x 24" Vacuum UV Exposure Unit Feature: Power: 220V,50HZ/110V,60HZ,250W Max.working area: 500 x 600mm( 20" x 24") Light source: UV light Lamp power x amount: 20W x 8pcs Digital display of exposure time setting Applications: Exposure machine is one of the
Ships to United States
S&A CW-5000TG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 220-240V, 50Hz
Item Code: CW-5000TGTY
leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water!
Ships to United States
S&A CW-5000DG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 110V, 60Hz
Item Code: CW-5000DGTY
8cm between obstructions and the side air inlet. 5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. 6. Please pay attention to the effect of the condensate water! With greater ambient
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please recognize S&A logo when you purchase S&A water chillers. Description S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. This Water Chiller has been sold largely to Europe, South America, Asia and other markets; Economic cooling equipment, easy to install and operate, compact and easily movable. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order. The products are nonrefundable after selling, only if quality issue. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.) Features： Specific disconnection alarm securing protection; High cost performance, low failure rate; Radiating Capacity is 50W / ℃; Forces circulation, 9L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better. Comprehensive reference to the international radiator - type cooling system; Small thermolysis water cooler; With completed water flow and over high temperature alarm functions; Professional forced air - cooled radiator; CW-3000 Laser Water Chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; High heat dissipating capacity and not easy to be blocked. SPECIFICATION Model CW-3000DGTY Voltage AC 1P 110V Frequency 50/60Hz Current 0.4~0.9A Machine power 0.07kW Radiating capacity 50W/℃ Pump pressure 1bar Max.flow 10L/min N.W 9Kgs(19.8lb) G.W 11 Kgs(24.3lb) Protection flow alarm Tank capacity 9L Inlet and outlet OD 10mm barbed connector Dimension 49cm x 27cm x 38cm (19.3" x 10.6" x 15") Package dimension 55cm x 34cm x 43cm (23.2" x 15.4" x 18.9") CONTOUR AND PARTS INTRODUCTION Independent production of sheet metal and heat exchanger . 9L cooling tank, fast cooling. Adopt IPG fiber laser for welding and cutting sheet metal, adopt minimize risks of water and refrigerant leakage and improve quality Digital temperature display The digital temperature display is able to indicate water temperature and alarm codes. Ease of moving and water filling. The firm handle can help move the water chillers easily. Inlet and outlet connector equipped. Multiple alarm protection. The laser will stop working once it receives alarm signal from the water chiller for protection purpose. High speed fan The high speed fan is installed to ensure high cooling performance. Easy water draining It is suggested to replace the cooling water(distilled water or purified water as cooling water) every 3 to 6 months. Connection diagram between water chiller and laser machine Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine. Aviation connector of the water tank connects to the aviation connector of the laser machine. FLOW ALARM AND OUTPUT PORTS In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-3000series water cooler possess a low flow alarm protection. (1) Flow alarm output ports and the wiring diagram (2) ALARM DESCRIPTION Causes of the cooling water circulation alarm and the working condition table Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. MAINTENANCE Method of exchanging water in the water tank and the exchanging frequency Method of exchanging water in the water tank Drain the waste water out of the water tank through the drain outlet and fill the clean water into the tank through the filling hole Exchanging Frequency The purified water should be exchanged once a month and the running water should be exchange twice a month. The quality of the circulating water will directly influence the service life the laser tube.It is recommended to use purified water. Application S&A CW-3000 chiller for 3KW CNC spindle machine S&A CW-3000 water cooler for 60W co2 laser machine S&A CW-3000 chiller for dual 1.5KW engraving machine S&A CW-3000 chiller for 80W co2 laser cutting machine S&A CW-3000 chiller for acrylic laser cutting machine Certificate With 11 patent certificates and won Quality integrity Level A certificate; ISO 9001, CE, RoHS and REACH environmental certificated. Conforms to air transport requirements, energy saving and environment friendly. Warehouse 18,000 square meters brand new industrial refrigeration system research center and production base ，Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture. Test System With excellent laboratory testing system, simulates actual working environment for chiller. Overall performance testing before delivery: aging test and complete performance test must be executed on each finished chiller. Installation It is very simple to install this industrial cooling machine. The first time installation of the new machine can be carried out by following steps. Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. Check the water level of the water tank again. (It should be 80-150cm from the surface of water to the injection port) Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The cooling water must be drained if the cooler is out of use for long time or before being transported. To protect laser heating devices , the radiator fan of cooler will suspend to work when water temperature is lower ( about 10℃ ) , and it will restart to run when water temperature rises to higher ( about 20 ℃). Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place fuse burnt-out Plug the power cord in place Replace the fuse inside the power interface which is in the back of machine Flow alarm (panel red light) with water pipe directly connect to the outlet, inlet, there is no water flow Water level in the storage water tank is too low Feed water and check the pipe leakage When used with the device, flow alarm (panel red light), but a direct connection with the pipe outlet and inlet, there is water flowing but not alarming Blockage in circulating water pipeline Check circulating water pipeline Ultra-high temperature Chiller of poor ventilation Excessive heat load To improve the ventilation Reduce the heat load or to use other models A normal boot, but the fan does not work The water temperature below 20 degrees A normal phenomenon, no processing Switch on with alarming after adding water or changing water Water drop in electric circuit Damaged pumps dry transfer Natural drying or drying off cap To replace or repair water pumps,prohibited anhydrous boot Slow outfall drainage The injection port is not open Open the injection port
Ships to United States
US Stock Used Qomolangma Tabletop Precise 24.8in x 32.6in 120W Vacuum LED UV Exposure Unit
Item Code: RFB-SPM-STDJ-LED6080V-US
. US Stock Used Qomolangma Tabletop Precise 24.8in x 32.6in 120W Vacuum LED UV Exposure Unit LED exposure unit is used in the filed of plate-making such as pad plate, screen plate, hot stamper plate,resin plate. when you put the film onto the plate into UV LED exposure machine, start it, the emulsion
Ships to United States
Screen Printing Squeegee Rack Holder Organizer Screen Printing Equipment
Item Code: SPM-TJ-006327
Screen Printing Squeegee Rack Holder Organizer Screen Printing Equipment · Holds 12 squeegees per rack. Mount on a wall, or mount on a piece of wood and lay flat. · Laser cut. That's easy to clean and rust resistant, and more durable than wood · Stackable and expandable
Ships to United States
Simple Screen Printing Press Desktop Simple Screen Printing
Item Code: SPM-TJ-006322
Desktop Simple Screen Printing (pair) for Screen Printing The company's new design desktop simple screen printing，comes with an adjustable weight balance， instead of butterfly clamp. two ways of installation and fixed up. applicability more, operate more easily, Professional art design more
Ships to United States
Movable Screen Printing Material Rack Silk Screen Printing Equipment
Item Code: SPM-TJ-SPE2016GJJ
Mobile Type Screen Printing Material Rack Aluminum Frame Rack/Squeegee Rack/Ink Rack/Spatulas Shovel Handle Knife Rack. The table of THIS DOES NOT INCLUDE THE squeegees, inks, spatulas and screens. They are only used for illustration. Description: 1. Screen frames placed area: can also place
Ships to United States
1 Color Screen Printing Manual Screen Printing Equipment
Item Code: SPM-TJ-SPE-ZMD
1 Color Screen Printing Manual Screen Printing Equipment Features: This machine is specially designed for one color T-shirt screen printing because of its dedicated T-shirt pallet which can guarantee the accurate positioning and good printing effect. It can also be applied to printing on
Ships to United States
Screen Printing Material Holding Rack Work Table Screen Printing Equipment
Item Code: SPM-TJ-SPESPE-DGN
Screen Printing Material Holding Rack Work Table This materials rack is designed & made by our company. It is used to place some screen printing hand tools, such like squeegee/scraper/ ink /screen frame and other chemicals. It is also have strong practicability, convenient operation
Ships to United States
Vertical Type Rotating Screen Printing Mesh Rack Screen Printing Rack
Item Code: SPM-TJ-SPE-SWJ12L
Vertical Type Rotating Screen Mesh Rack This rack is mainly used for placing various sizes mesh in roll (with paper tube). It can install 6-12 rolls normal mesh in the upper part according to needs, and the semicircle part of the bottom can be placed about 20 roll mesh that not commonly used
Ships to United States
Desktop Fixed Screen Printing Clamp
Item Code: SPM-TJ-A250
Desktop Fixed Screen Printing Clamp Functions: 1.The chuck is 10"(250mm) wide and 3"(80mm)high, and it is suitable for all kinds of screen frames with thickness below 2.36"(60mm).There are three grille fixing handles installed in the chuck , it is stronger to fix the screen frame
Ships to United States
Drying Cabinet Warming Machine Max Exposure size 13.8 x 10.2 in for Cambered Screen Plate
Item Code: SPM-TJ-SPE-JRQ240
Drying Cabinet Warming Machine for Cambered Screen Plate This machine is specially matched for all kinds of cap and mask printing machines produced by our company.This machine is composed of two parts, one is the plate heating table; Two is light-proof box with four layers. Application: 1.Avoid
Ships to United States
6 Color 6 Station Manual Screen Printing Machine Screen Printing Equipment Silk Screen Printing
Item Code: SPM-TJ-A662L-1
This is a simple type 6 Color 6 Station Screen Printing Press. It can apply 6 screens to 6 stations simultaneously. The screen layer and the pallet layer can rotate independently, which makes it easier for multi-color printing. You can print onto clothing (especially for T-shirt), woven fabric
Ships to United States
Original Roland SP-540 Print Carriage Board - W8406050F0
Item Code: ACC-ROL-025
Original Roland SP-540 Print Carriage Board - W8406050F0 Printer Compatibility: Roland SP-540 / SP-300 / SP-540V / SP-300V / FLJ-300 Manufacturer: Roland Part No.: W8406050F0
Ships to United States
Buying Guide for Industry Water Chiller, Free Download
Item Code: CS-SABG-PDF
Please Click Here to Download the file Buying Guide for Industry Water Chiller
Ships to United States
Packaging Industry General Signs Vector Illustrations (Free Download Illustrations)
Item Code: SIC-VGI-S-001
Title: Packaging Industry General Signs Vector Illustrations (Free Download Illustrations) Format: Ai Size: 1.4MB (Zip) Notice: 1. You can FREE download the file directly. 2. If you can t find the file that you need, please just click "Ask a Question" Button above to leave us a message. 3
Ships to United States
ATMA Pneumatic Mini Flat/Curve Screen Printer Screen Printing Press
Item Code: SPM-ATMA-TY-500FABT
vibration phenomenon upon collision. Safety insertion pin facilitates to exchange squeegee / flood coater / screen and cleaning residue ink. Design of the retractable print head carriage ensures centric position for printing. CPU control, selectable various printing cycle mode corresponding to diverse
Ships to United States
ATMA 220V 570W Pneumatic Flat Screen Printer Screen Printing Press
Item Code: SPM-ATMA-AT-60FA
ATMA 220V 570W Pneumatic Flat Screen Printer Screen Printing Press Suitable for industrial printing on membrane switch, adhesive logo sticker, nameplate,dashboard and so on. Constantly explore medium size screen printer on market, it is acknowledged, application scope of medium size screen printer
Ships to United States
Vertical Multi-function Screen Printing Frame Rack
Item Code: SPM-TJ-SPE-WKJ
Vertical Multi-function Screen Frame Rack This rack is dedicated to place the screen frames, ensure the orderly arrangement of the screen frame, and save the space of the screen frame. This rack is equipped with moving casters, which can be moved at any time. This rack can place various sizes
Ships to United States
The Drawer Oven Dryer for Screen Printing
Item Code: SPM-BELSEY-DC7090-3
The Drawer Oven Dryer for Screen Printing Description: This drawer oven with three drawers is applying for curing digital printing T-shirt. Each drawer has the motor to drive in and out. The blower sucks the hot air for the bottom of the oven and the IR heater on the top of the draw. The hot air
Ships to United States
Universal 4 Layers Screen Printing Frame Rack
Item Code: SPM-TJ-006338FR
Universal 4 Layers Screen Printing Frame Rack The rack is mainly used for placing various sizes of screen frames. According to the need to adjust part of the rack, in order to fit a variety of different sizes screen frame. Produced by baking iron pipe , rust and corrosion resistance, anti
Ships to United States
Screen Printing Rubber Silicone Strip Cutter
Item Code: SPM-TJ-SPE-QGQ
Screen Printing Rubber Silicone Strip Cutter This cutter is mainly used for cutting all kinds of silk screen scraping strips, all kinds of rubber, silica gel strips, round rods and other soft materials. The fixed clamp fix the cutting materials. Special high strength stainless steel slice cutting
Ships to United States
