Cart 
Order Tracking
US Stock-Generic 180dpi 1.5m Long Encoder Strip for Epson XP-600 Printhead CALCA A3 DTF Printer
Item Code: DTF-PART-AA3-14-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Generic 180dpi 1.5m Long Encoder Strip for Epson XP-600 Printhead
Ships to United States
US Stock-Generic 180dpi 1.5m Long Encoder Strip for CALCA Epson XP-600 Printhead 13in Easy DTF Printer
Item Code: DTF-PT13-A-22-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. It's suitable for the DTF printer below: DTF-STXP-13H2-US, CALCA-DTF-TT13X-US, CALCA-DTF-TT13WF-US, DTF-STXP-13H2P-US, DTF-STXP-13H2, CALCA-DTF-TT13X, CALCA-DTF-TT13WF
Ships to United States
S&A CW-5000TG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 220-240V, 50Hz
Item Code: CW-5000TGTY
Description CW-5000DG industrial water chillers have been popular for over 16 years with the annual output of 30,000 units.It is designed for cooling the one CO2 glass laser tube under 120W of the laser engraving and cutting machine. (Its emitting rate is higher than 60%.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features： It is suitable for cooling the laser tube under 120W, and the temperature can be adjusted precisely. You can choose different models according to local voltage and frequency. It can extend the using life of laser tube and ensure the engraving effect better. With completed water flow and over high temperature alarm functions It can control the water temperature, precision is ±0.3℃, which provide stable working conditions for laser devices. Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. CW-5000 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely. Specific disconnection alarm securing protection. Enclosed water tanks, water used for a long time. Equipped with alarm output port, can quickly protect sensitive components. High cost performance, low failure rate. Multiple power specifications; CE approval; REACH approval; RoHS approval. Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. ONTOUR AND PARTS INTRODUCTION Independent production of sheet metal User-friendly control panel The temperature controller offers high precision temperature control of ±0.3°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Dust-proof filter Integrated with the grill of the side panels, easy mounting and removal. Ease of moving and water filling The firm handle can help move the water chillers easily. Ventilation Distance Application Chiller CW-5000 for 120W metal laser cutting machine Water chiller CW-5000 for acrylic co2 laser cutting machine Industrial chiller CW-5000 for laser cutter Air cooled chiller CW-5000 for co2 laser cutting & engraving machine Water cooled chiller CW-5000 for uv laser marking machine CW-5000 chiller for 3w-5w uv laser machine Refrigeration water chiller CW-5000 for laser marking machine Compressor water chiller CW-5000 for UV curing system printer Industrial water chiller CW-5000 for laser marker Certificate Warehouse Test System Installation Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of cooling water additive (anti-corrosion water aqua). Working in cold north area, it’s better to use noncorrosive antifreeze fluid. According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set value, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start over the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. Adjust parameters of temperature controller. CW-5000/5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to page 15, “Operating status and parameters adjustment.” Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Professional use only! The appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction,children being supervised not to play with the appliance! Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place Check and ensure the power interface and the power plug is plugged in place and in good contact. Fuse burnt-out Pull out the fuse box from the power supply interface of the chiller, check the fuse, replace with spare fuse if necessary and check whether the power supply voltage is stable; Check and ensure the power interface and the power plug is plugged in place and in good contact. Flow Alarm (panel red light is on)use a water pipe directly connect to the water outlet and inlet but still without water flowing Water level in the storage water tank is too low Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. Flow Alarm occurs while running with other equipment (panel red light is on),but there is water flowing and no alarm when use a water pipe directly connected to the chiller water outlet and inlet. Water circulation pipes are blocked or a pipe bending deformation. Check water circulation pipe Ultra-high temperature alarm Blocked dust gauze, bad thermolysis Unpick and wash the dust gauze regularly Poor ventilation for air outlet and inlet To ensure a smooth ventilation for air outlet and inlet Voltage is extremely low or astable To improve the power supply circuit or use a voltage regulator Improper parameter settings on thermostat To reset controlling parameters or restore factory settings Switch the power frequently To ensure there is sufficient time for refrigeration (more than 5 minuets) Excessive heat load Reduce the heat load or use other model with larger cooling capacity Alarm for ultra-high room temperature The working ambient temperature is too high for the chiller To improve the ventilation to guarantee that the machine is running under 40℃. Serious problem of condensate water Water temperature is much lower than ambient temperature, with high humidity Increase water temperature or to preserve heat for pipeline Water drains slowly from outfall during water changing Injection port is not open Open the injection port
Ships to United States
S&A CW-5000DG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 110V, 60Hz
Item Code: CW-5000DGTY
It is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This water chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features: • It is suitable for cooling the laser tube under 150W, and the temperature can be adjusted precisely. • You can choose different models according to local voltage and frequency. • It can extend the using life of laser tube and ensure the engraving effect better. • With completed water flow and over high temperature alarm functions • It can control the water temperature, precision is ±0.3℃, which provide stable working conditions for laser devices. • Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; • This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. • CW-5000 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely. • Specific disconnection alarm securing protection. • Enclosed water tanks, water used for a long time. • Equipped with alarm output port, can quickly protect sensitive components. • High cost performance, low failure rate. • Multiple power specifications; CE approval; RoHS approval. Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. User-friendly control panel The temperature controller offers high precision temperature control of ±0.3°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Dust-proof filter Integrated with the grill of the side panels, easy mounting and removal. Ease of moving and water filling The firm handle can help move the water chillers easily. Ventilation Distance Alarm Function’s Description: Flow alarm and output ports: In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5000series chillers possesses an unique low flow alarm protection. The cooling water circulation loop alarm causes and the work of the state table Normal Flow Indicator Flow Alarm Indicator Buzzer Output Ports Hi, H2 Output Ports H1, H3 Circulating pump works properly ON OFF NOT RING DISCONNECTION BREAKOVER Blocked cooling water circulation loop OFF ON RING BREAKOVER DISCONNECTION Alarm of water shortage OFF ON RING BREAKOVER DISCONNECTION Faulted circulating pump OFF ON RING BREAKOVER DISCONNECTION Power interruption / / / BREAKOVER DISCONNECTION Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. Fill the water tank with purified water. Connect the water inlet of the water tank to the water outlet of the laser machine and connect the water outlet of the water tank to the water inlet of the laser machine. Connect the signal line of the water tank with that of the laser machine. Please see pictures below. Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps. A.Open the package to check if the machine is intact and all the necessary accessories are completed. B.Open the injection port to feed cooling water. Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid. C.According to system conditions, please connect the water inlet and outlet pipe well. D.Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. E.Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. F.Adjust parameters of temperature controller. CW-5000 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to “Operating status and parameters adjustment.” Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non – corrosive antifreeze if you are in the northern cold regions. Cautions 1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps). 2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us. 3. To protect the pump, it’s strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! 4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. 5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. 6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Application： CW5000-water-chiller-cool-for-Picosecond-Lasers CW5000-water-chiller-cool-for-UV-laser-marking-machine CW5000-water-chiller-cool-for-Uv-solid-laser CW5000-water-chiller-for-cooling-700W1500W-UV-light-source CW5000-water-chiller-for-cooling-UV-LED-source Industrial-chiller-CW-5000-for-HF-welding-machine Quality Report:
Ships to United States
S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
Item Code: CW-5200THTY
S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please recognize S&A logo when you purchase S&A water chillers. Description CW-5200TH industrial water chillers have been popular for over 16 years with the annual output of 30,000 units.It is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60%.) Cooling capacity is 1400W. Have design patent Certificate, CE and RoHS Certificate. This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features： It is suitable for cooling the laser tube under 150W, and the temperature can be adjusted precisely. You can choose different models according to local voltage and frequency. It can extend the using life of laser tube and ensure the engraving effect better. With completed water flow and over high temperature alarm functions It can control the water temperature, precision is ±0.3℃, which provide stable working conditions for laser devices. Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. CW-5200 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely. Specific disconnection alarm securing protection. Enclosed water tanks, water used for a long time. Equipped with alarm output port, can quickly protect sensitive components. High cost performance, low failure rate. Multiple power specifications; CE approval; REACH approval; RoHS approval. SPECIFICATION Model CW-5200THTY Voltage AC 1P 220-240V Frequency 50/60Hz Current 0. 5~4.8A Machine power 0.62/0.74kW Compressor power 0.49/0.61kW, 0.65/0.81HP Nominal cooling capacity 4879Btu/h 1.43kW 1229Kcal/h Refrigerant charge 370g Pump power 0.05kW Pump pressure 1.2bar Pump flow 13L/min N.W 25Kgs(55lb) G.W 28Kgs(61.7lb) Refrigerant R-134a Precision ±0.3℃ Reducer Capillary Protection Overcurrent protection for compressor, flow alarm, over temperature alarm Tank capacity 6 L Inlet and outlet 10mm Fast connector Dimension 580mm x 290mm x 470mm (22.8" x 11.4" x 18.5") Package dimension 650mm x 360mm x 510mm (25.6" x 14.2" x 20") CONTOUR AND PARTS INTRODUCTION User-friendly control panel The temperature controller offers high precision temperature control of ±0.3°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Ease of moving and water filling The firm handle can help move the water chillers easily. Inlet and outlet connector equipped Multiple alarm protection. The laser will stop working once it receives alarm signal from the water chiller for protection purpose. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Dust-proof filter Integrated with the grill of the side panels, easy mounting and removal. Temperature controller panel description： The new T503 intelligent temperature controller does not need to adjust the controlling parameters under normal circumstance. It will self-adjust controlling parameters according to room temperature for meeting equipment cooling requirements. User also can adjust the water temperature as needed. Temperature controller panel description： Indicators D1, D2 (as shown) of thermostat working state D1 ON: thermostat works in intelligent control mode; D1 OFF: thermostat works in temperature control mode; D1 FLASHES: thermostat works in parameters setting mode or displays value of room temperature; D2 ON: chiller works in refrigerating state; D2 OFF: chiller works in the insulation working state; D2 FLASHES: chiller works in the energy-saving state; Press ▼ button will show the room temperature, 6 seconds later to display the restore defaults. (Meanwhile, D1 is flashing, displaying room temperature.) ▲▼ keys are for adjusting the display status of the controller, parameters selection and adjustment. RST key: enter key. SET key: function setting key. Alarm function (1) Alarm Display: When alarm occurs, the error code and the temperature will be alternately displayed. (2) To suspend the alarm: In alarming state, the alarm sound could be suspended by pressing any button, but the alarm display remains until the alarm condition is eliminated. In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5000/5200series chillers possesses an unique low flow alarm protection. Ventilation Distance Application Chiller CW-5200 for 150W metal laser cutting machine Water chiller CW-5200 for acrylic co2 laser cutting machine Industrial chiller CW-5200 for laser cutter Air cooled chiller CW-5200 for co2 laser cutting & engraving machine Water cooled chiller CW-5200 for uv laser marking machine CW-5200 chiller for 8w-15w uv laser machine Refrigeration water chiller CW-5200 for laser marking machine Compressor water chiller CW-5200 for UV curing system printer Industrial water chiller CW-5200 for laser marker Certificate Warehouse Test System Installation Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of cooling water additive (anti-corrosion water aqua). Working in cold north area, it’s better to use noncorrosive antifreeze fluid. According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set value, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start over the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. Adjust parameters of temperature controller. CW-5000/5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to page 15, “Operating status and parameters adjustment.” Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm. Professional use only! The appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction,children being supervised not to play with the appliance! Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place Check and ensure the power interface and the power plug is plugged in place and in good contact. Fuse burnt-out Pull out the fuse box from the power supply interface of the chiller, check the fuse, replace with spare fuse if necessary and check whether the power supply voltage is stable; Check and ensure the power interface and the power plug is plugged in place and in good contact. Flow Alarm (panel red light is on)use a water pipe directly connect to the water outlet and inlet but still without water flowing Water level in the storage water tank is too low Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. Flow Alarm occurs while running with other equipment (panel red light is on),but there is water flowing and no alarm when use a water pipe directly connected to the chiller water outlet and inlet. Water circulation pipes are blocked or a pipe bending deformation. Check water circulation pipe Ultra-high temperature alarm Blocked dust gauze, bad thermolysis Unpick and wash the dust gauze regularly Poor ventilation for air outlet and inlet To ensure a smooth ventilation for air outlet and inlet Voltage is extremely low or astable To improve the power supply circuit or use a voltage regulator Improper parameter settings on thermostat To reset controlling parameters or restore factory settings Switch the power frequently To ensure there is sufficient time for refrigeration (more than 5 minuets) Excessive heat load Reduce the heat load or use other model with larger cooling capacity Alarm for ultra-high room temperature The working ambient temperature is too high for the chiller To improve the ventilation to guarantee that the machine is running under 40℃. Serious problem of condensate water Water temperature is much lower than ambient temperature, with high humidity Increase water temperature or to preserve heat for pipeline Water drains slowly from outfall during water changing Injection port is not open Open the injection port
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please recognize S&A logo when you purchase S&A water chillers. Description S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. This Water Chiller has been sold largely to Europe, South America, Asia and other markets; Economic cooling equipment, easy to install and operate, compact and easily movable. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order. The products are nonrefundable after selling, only if quality issue. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.) Features： Specific disconnection alarm securing protection; High cost performance, low failure rate; Radiating Capacity is 50W / ℃; Forces circulation, 9L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better. Comprehensive reference to the international radiator - type cooling system; Small thermolysis water cooler; With completed water flow and over high temperature alarm functions; Professional forced air - cooled radiator; CW-3000 Laser Water Chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; High heat dissipating capacity and not easy to be blocked. SPECIFICATION Model CW-3000DGTY Voltage AC 1P 110V Frequency 50/60Hz Current 0.4~0.9A Machine power 0.07kW Radiating capacity 50W/℃ Pump pressure 1bar Max.flow 10L/min N.W 9Kgs(19.8lb) G.W 11 Kgs(24.3lb) Protection flow alarm Tank capacity 9L Inlet and outlet OD 10mm barbed connector Dimension 49cm x 27cm x 38cm (19.3" x 10.6" x 15") Package dimension 55cm x 34cm x 43cm (23.2" x 15.4" x 18.9") CONTOUR AND PARTS INTRODUCTION Independent production of sheet metal and heat exchanger . 9L cooling tank, fast cooling. Adopt IPG fiber laser for welding and cutting sheet metal, adopt minimize risks of water and refrigerant leakage and improve quality Digital temperature display The digital temperature display is able to indicate water temperature and alarm codes. Ease of moving and water filling. The firm handle can help move the water chillers easily. Inlet and outlet connector equipped. Multiple alarm protection. The laser will stop working once it receives alarm signal from the water chiller for protection purpose. High speed fan The high speed fan is installed to ensure high cooling performance. Easy water draining It is suggested to replace the cooling water(distilled water or purified water as cooling water) every 3 to 6 months. Connection diagram between water chiller and laser machine Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine. Aviation connector of the water tank connects to the aviation connector of the laser machine. FLOW ALARM AND OUTPUT PORTS In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-3000series water cooler possess a low flow alarm protection. (1) Flow alarm output ports and the wiring diagram (2) ALARM DESCRIPTION Causes of the cooling water circulation alarm and the working condition table Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. MAINTENANCE Method of exchanging water in the water tank and the exchanging frequency Method of exchanging water in the water tank Drain the waste water out of the water tank through the drain outlet and fill the clean water into the tank through the filling hole Exchanging Frequency The purified water should be exchanged once a month and the running water should be exchange twice a month. The quality of the circulating water will directly influence the service life the laser tube.It is recommended to use purified water. Application S&A CW-3000 chiller for 3KW CNC spindle machine S&A CW-3000 water cooler for 60W co2 laser machine S&A CW-3000 chiller for dual 1.5KW engraving machine S&A CW-3000 chiller for 80W co2 laser cutting machine S&A CW-3000 chiller for acrylic laser cutting machine Certificate With 11 patent certificates and won Quality integrity Level A certificate; ISO 9001, CE, RoHS and REACH environmental certificated. Conforms to air transport requirements, energy saving and environment friendly. Warehouse 18,000 square meters brand new industrial refrigeration system research center and production base ，Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture. Test System With excellent laboratory testing system, simulates actual working environment for chiller. Overall performance testing before delivery: aging test and complete performance test must be executed on each finished chiller. Installation It is very simple to install this industrial cooling machine. The first time installation of the new machine can be carried out by following steps. Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. Check the water level of the water tank again. (It should be 80-150cm from the surface of water to the injection port) Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The cooling water must be drained if the cooler is out of use for long time or before being transported. To protect laser heating devices , the radiator fan of cooler will suspend to work when water temperature is lower ( about 10℃ ) , and it will restart to run when water temperature rises to higher ( about 20 ℃). Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place fuse burnt-out Plug the power cord in place Replace the fuse inside the power interface which is in the back of machine Flow alarm (panel red light) with water pipe directly connect to the outlet, inlet, there is no water flow Water level in the storage water tank is too low Feed water and check the pipe leakage When used with the device, flow alarm (panel red light), but a direct connection with the pipe outlet and inlet, there is water flowing but not alarming Blockage in circulating water pipeline Check circulating water pipeline Ultra-high temperature Chiller of poor ventilation Excessive heat load To improve the ventilation Reduce the heat load or to use other models A normal boot, but the fan does not work The water temperature below 20 degrees A normal phenomenon, no processing Switch on with alarming after adding water or changing water Water drop in electric circuit Damaged pumps dry transfer Natural drying or drying off cap To replace or repair water pumps,prohibited anhydrous boot Slow outfall drainage The injection port is not open Open the injection port
Ships to United States
Generic Mutoh VJ-1604 Big Damper with Big Filter
Item Code: ACC-EPS-001-WT
Generic Mutoh VJ-1604 Big Damper with Big Filter Printer Compatibility : Mutoh VJ-1604 / VJ-1604W
Ships to United States
24" x 98′ Roll White Color Printable Heat Transfer Vinyl For T-shirt Fabric
Item Code: HTF-PC-001
• Using eco solvent ink. • White color, colorful image printed on it. • PU material, using together with transparent application tape. • Image should be printed by print and cut printer, like Roland. Description: This print and cut heat transfer vinyl is made of new kind of heat transfer material. The vinyl is enviroment-friendly, waterproof, tender touch feeling. And its flexibility is very good. Images on it are vivid and high resolution. ECO solvent ink is need when images printed on the film by print and cut printer. You can print any image you like on the transfer film and then cut it to transfer on the clothes. Warm Tips: 1. Please considering order application tape when buying the print and cut transfer vinyl because the vinyl should be used together with application tape. 2. This heat transfer vinyl can be used for T-shirts, coats, caps wheather they are cotton ones or fiber ones and any color is ok. Comparison of Print and Cut Heat Transfer Vinyl T-shirt Heat Transfer Paper Applications Transferrable on no matter cotton or dacron materials with whatever colors. Specially for pure cotton or garments containing more cotton, and the strong/darker/light colored clothes need correspondent colors of T-shirt transfer papers. Washability Washable: able to wash up to 20 times without problem. Unwashable: washing up to 5 or 6 times, it graphics will appear crack. Performance The vinyl has good elasticity and the transferred images are durable that not easy to break from stretching. Poor elasticity and weak from stretching. The transfer vinyl is widely used for T-shirts, coats, caps, fabric bags, pillowcase, leather bag, etc. customer's case:
Ships to United States
Qomolangma 26" Small Home electric Business Card Cold Laminating Machine
Item Code: FMJ-650-II
Feature: • Sample electric cold laminating machine, with functions of single sided cold laminating and mounting by electric. • The mounting master 26" is motorized table top laminators. • Laminating speed can be easily adjusted from 0 - 3m (118") / min. • 1" core auto - grip rollers for easy laminating film setup. • 65mm (2.6") bigger rollers for best quality laminating control. Advantage: • Good color reducibility and light transmittance, free of bubbles and snowflake point. • Easy to use and Guarantee a quality result each time. • The cold laminator has simple structure, portable machine, space saving, reasonable, humane and low cost characteristics. • The easy speed control makes your daily job more handily. Used for: This model cold laminator can be widely used for pre - masking vinyl graphic, mount prints on substrate, over laminating inkjet prints and so on. Applying application tapes, applying double side adhesives and vinyl. Benefit: • The laminator comes with a foot pedal that control forward and reverse, leaving both hands free to handle the work that is being processed. • The easy speed control makes your daily job more handily; the laminating speed can be easily adjusted from 0 - 118.1" (0 - 3m) / min. • Table Top Model, driven by electric or by hand (For option) • No need to heat, no auto rewind shafts • It is operated conveniently. High quality Butadiene acrylonitrile rubber roller, 65mm (2.6 inch diameter) Generally speaking, the lifespan of a roller is about 4-5 years or longer. The roller is the key component of a laminator and it directly affects the quality of lamination, so it is crucial to give good care and maintenance to the roller. FMJ-650-II is common manual and electrical cold laminator, cannot take up the liner paper mechanically. But it is very cheap. FMJ-650-II-PLUS is semi – auto cold laminator (Automatic take - up rolls of liner paper, without take – up roller for after lamination prints). Appearance - Take reasonable money to buy the suitable machines. Our Machine: Appearance design of FMJ-650-II cold laminating machine has novel, simple and reasonable structure, humane and low cost characteristics. The other machine: The top right side machine’s appearance design is too thin, and it is easy to damage, and it has many questions if you buy. Material of rollers FMJ-650-II Adopts high quality diameter 65 mm (2.6”) acrylonitrile butadiene original rubber rollers, which can control the quality laminating very well. At the between upper and lower roller the picture laminated is the straight - line movement of internal forces. It saves manpower and is easy to operate. The common cold laminator machine adopts recycled rubber roller, and up and down roller’s thickness is not the same that will affect the laminating effect and machine’s using life. Front Laminating Method: Reverse Laminating Method: This new model can be widely used for pre - masking vinyl graphic, mount prints on substrate, over laminating inkjet prints and so on. The cold laminator is used for after printing. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc. Why buy this electric Business Card Cold Laminating Machine? Laminating is a low cost way to protect and preserve everything from ID cards to restaurant menus. But did you know lamination does more than just protect? And that it protects in ways you may not have considered. Lamination Preserves & Protects: Here are a few ways lamination protects your materials, with an example of each: Protects from spills: Sales presentation materials Protects from rain: Little League team roster Protects from grease and chemicals: Maintenance check list Protects from smudges & fingerprints: menus Protects from abrasion: Instructional materials Protects from the sun: outdoor directional signs Protects from creases and wrinkles: sales promotion material Lamination provides low - cost long - term protection without the need for climate control or other special protective measures. Lamination Improves Appearance: Lamination improves the appearance of your materials in a variety of ways. For example, lamination: deeper and brightens colors; enhances contrast; dirt, grease and smudges can be cleaned off; gloss, matte or satin finishes are available; Lamination gives your materials a finished, professional look of quality. Materials that are laminated just look better! Lamination Can Improve Sales / Save Money: By giving your materials a higher quality, professional look, lamination can improve your business image and help bring in more sales leads. Lamination can also save you money in a variety of ways, such as: Laminated materials can be reused over and over; Expensive graphics are protected; Lamination stiffens signs and posters (additional backing is not needed) ; Employees have proper identification helping to save time and reduce accidents; You can make low-cost signs that resist weather. Lamination provides a durable way to protect and enhance almost any type of printed material. It improves the quality of materials by enhancing color and contrast, and providing a glossy "wet" look.
Ships to United States
A4 8.3in x 11.7in Fine Cutting Inkjet Transfer Paper for T-shirt Heat Transfer Paper, 100 Sheets Pack
Item Code: HTPI-300R-A4-100PC
Description: 1. The back paper:Blue color chart 2. High quality and Strentch, good hand feeling 3. You can draw with any pen or any printers. Also can be used on Laser printers. 4. Compatible Ink: Dye ink, Pigment ink 5. Printers compatible: EPSON, Canon, HP, Small Desk Printers, large format
Ships to United States
A4 8.3in x 11.7in Light Inkjet Transfer Paper 50 Sheets Pack
Item Code: HTPI-HT150P-A4-100PC
Description: 1. The back paper:Blue color chart 2. High quality and Strentch, good hand feeling 3. You can draw with any pen or any printers. Also can be used on Laser printers. 4. Compatible Ink: Dye ink, Pigment ink 5. Printers compatible: EPSON, Canon, HP, Small Desk Printers, large format
Ships to United States
10ft Curved Portable Fabric Tension Exhibition Display Kits with Custom Graphic
Item Code: SIC-EDF-ST-S1
Description: This exhibit display system is a luxurious and protable kit for your medium exhibition activities, it’s your first choice for trade show, promotion etc. This system includes one 10ft curved fabric display wall, one allure fabric tension banner stands-arc angle, one allure fabric tension banner stands-oblique angle, one dye-sub fabric counter, two spotlights for backwall, two spotlights for arc angle/ oblique angle banner stand and two brochure accessories for arc angle/ oblique angle banner stand. They can be set up and disassembled in 15min without any tools, saving your precious time and energy. With its updated Aluminum frame, this kit is lighter, more durable and has longer service life. The pictures printed by imported hot stamping machine and ink are characterized by brilliance color, good color fastness, fadeless, environment-friendly. This system consists of: 10ft Curved Fabric Display Wall (Graphics Included) x 1 set Frame Size: 118.2" W x 87.07" H(300cm W x 221cm H) Graphic Size: 123.7" W x 90.62" H(314cm W x 230cm H) Package Size: 54"x13.4"x10.6"(137x34x27cm) G.W./set: 31.7lb(14.4kg) Allure Fabric Tension Banner Stands-Arc angle (Graphics Included) x 1 set Frame Size: Φ33.49"x78.8" H(Φ85cm x 200cm H) Graphic Size: 34.67" W x 78.8" H(88cm W x 200cm H) Package Size: 25.6"x17.7"x6.3"(65x45x16cm) G.W./set: 10.3lb(4.7kg) Allure Fabric Tension Banner Stands-Oblique angle (Graphics Included) x 1 set Frame Size: Φ33.49"x78.8" H(Φ85cm x 200cm H) Graphic Size: 34.67" W x 81.16" H(88cm W x 206cm H) Package Size: 25.6"x17.7"x6.3"(65x45x16cm) G.W./set: 10.3lb(4.7kg) Dye-Sub Fabric Counter (Graphics Included) x 1set Frame Size: 15.8" x 23.6" x 38.22"H(40cm x 60cm x 97cm H) Graphic Size: 58.31" W x 39.4" H(148cm W x 100cm H) Package Size: 26.5"x 17.7" x 5.9"(65 x 45 x 15cm) G.W./set: 13.4lb(6.1kg) Spotlight for Backwall x 2 sets Package Size: 2.8" x 6.3" x 23.6" (7 x 16 x 60cm) G.W./set: 1.98lb (0.9kg) Spotlight for Arc Angle/ Oblique Angle Banner Stand x 2 sets Package Size: 3.9" x 7.9" x 16.5" (10 x 20 x 42cm) G.W./set: 2.2lb (1kg) Brochure Accessories for Arc Angle/ Oblique Angle Banner Stand x 2 sets Package Size: 5.9" x 13.8" x 29.9"(15 x 35 x 27cm) G.W./set: 9.02lb(4.1kg) Portable Travel Case for Fabric Tension Display x 1 set Package Size: 52.76"x12.6"x10.24"(1340x320x260mm) G.W./set: 49.1lb (22.3kg) Easy 4 Steps to Custom Made Your Fabric Exhibition Display System: Please Download Here: Artwork Guidance & Requirement 10ft Curved Fabric Display Wall Design Template Allure Fabric Tension Banner Stands-Arc angle Design Template Allure Fabric Tension Banner Stands-Oblique angle Design Template Dye-Sub Fabric Counter Design Template Details: Frame Details： • Aluminium alloy tube, thicker tube wall. • Telescopic pipe with Marble lock, connected with rubber bands, more easier to install and collect. • Lighter, more durable and has longer service life. Graphic Details: • Stretch Fabric with zips, easier to install. • Durable, wrinkle free, detailed and anti-uv. • Washable and recyclable. • Thermal dye-sublimation printing, brightly-colored, fadeless, environment-friendly. Customer's Case: This is Gary Higman from United States.We need three sets of 10ft Curved Portable Fabric Tension exhibition display System with Graphic #1 very urgently. One of my Friends introduced Sig-in-China to us.We bought online directly. It is very convenient. Only four days later, they sent the display system to us by FedEx. That is so quick! I can got all the display earlier than expect.We set up all the booths at our facility. They work awesome. Great work, great website! Application: Process: B2B Service: Dear Business Customers: Sign-in-China is the world's NO.1 online wholesale supplier for advertising & signage products. Diversified products meet your different purchase demands, We offer free samples or brochures to make your business boom, our high quality professional B2B service team are waiting for you: ● Printers ● Agencies ● Signage ● Displays ● Marketeers If you would like to expand your business with quality portable display solutions, please contact us directly. You can also click here to learn more. Sincerely, Sign-in-China.com
Ships to United States
Standard Aluminum Portable Trade Show Counter with Top Board
Item Code: P-SKL11-2
Description: A promotional counter, such as a promotion stand or trade show counter, offers a great reception point at marketing events and exhibits. This demonstration center is made of corrugated plastic with an aluminum frame. This promotional counter features a blank header to attach your own sign or graphics. It take just minutes to setup and require no tools for assembly. Feature: • Aluminum structure. Portable and much more strong. Notice: Price is not including graphic printing It is easy to install banner stand. Firstly, stick the spike it into ground and connect the four poles, then fix the banner on the pole and insert the rope through the hole of banner bottom then use the key snap trigger to lock at the bottom of pole, and the last step, put the pole into the spike. Firstly open the side panel outwards 90º on which the gear teeth couple each other to adjust the degree of angles. Fix the projection of the front panel by the hole of top panel. There are two aluminum poles on which there are connection turnbuckles. Fix the pole to the holes of top panel by tightening the turnbuckles so that the poles will stand on the panel. The header assembly is done by slotting two aluminum poles into the header. Connect the pole header with the poles on the top panel. The installation finished. This promotional counters are ideal for many events, including Trade Shows, Exhibitions and are very popular for Shopping Centre Demonstrations.
Ships to United States
Infiniti / Challenger FY-3208H / FY-3208G / FY-3208R Feeding and Take Up Sensor
Item Code: ACC-LFP-134
Infiniti / Challenger Feeding &Take Up Sensor Printer Compatibility: Infiniti / Challenger FY-3206HA, FY-3206HF, FY-3206H, FY-3206R, FY-3206G, FY-3276HA, FY-3276R, FY-3208HA, FY-3208HF, FY-3208H, FY-3208G, FY-3208R Manufacturer: Ving Parts This is the original Infiniti part.
Ships to United States
Original Roland SJ-740 / FJ-740 / XC-540 / RS-640 / VP-540 Cap Capping Top - 1000004546 / 1000002794
Item Code: ACC-ROL-022-R
Original Roland SJ-740 / FJ-740 / XC-540 / RS-640 / VP-540 Cap Capping Top - 1000004546 / 1000002794 Printer Compatibility: Roland CJ-540 / Roland FJ-540 / Roland FJ-740K / Roland FJ-740 / Roland SC-540 / Roland SC-545 EX / Roland SP-300 / Roland SP-300V / Roland SP-540V / Roland SJ-1000 / Roland SJ-1045 EX / Roland SJ-540 / Roland SJ-545 EX / Roland SJ-640 / Roland SJ-645 EX / Roland SJ-740 / Roland SJ-745 EX / Roland VP-300 / Roland VP-540 / Roland SP-540 / Roland XJ-640 / Roland XJ-740 / Roland XC-540 / Roland RS-640 / Roland LEJ-640 / Roland LEC-300 / Roland LEC-540 / Roland LEF-20 / Roland LEF-12 Manufacturer: Roland Part No.: 1000004546/1000002794 Application: New cap top for sucking the waste solvent inks for large format printers.
Ships to United States
Mutoh RH2 / FalconII Solvent Resistant Pump
Item Code: ACC-WT-004
Mutoh RH2/FalconII Solvent Resistant Pump Printer Compatibility: Mutoh RH2 / FalconII Manufacturer: Ving Parts Product Size: 60mm*60mm*50mm Net Weight: 75g Packing Size: 185x150x75mm Packing Weight: 120g Quality Report:
Ships to United States
WIT-COLOR Ultra 1000 Control Board Ink Supply
Item Code: ACC-WIT-025
WIT-COLOR Ultra 1000 Control Board Ink Supply Printer Compatibility: WIT-COLOR Ultra 1000 Manufacturer: WIT-COLOR Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
