Cart 
Order Tracking
16oz/500ml Sublimation Blanks Frosted Gradient Mason Jar w/ LED Waterproof Solar Lid and Metal Handle
Item Code: SUB-LAT-MASM-16OZ-36PC
Our stunning sublimation gradient color mason jars lanterns come with LED Waterproof Solar Lid, which can be recharged automatically during daytime and make the lights inside shine in the dark! The frosted finish makes the lights more gentle and creates a lovely cozy ambience! Print your designs on these beautiful mason jar starlight-like lanterns, then you can put them on the floor, stairs, your dining table and night table to warm up your room or celebrate for holidays, hang them up to decorate your balcony, garden, patio and yard, or grab them out to brighten up the campsite! Specifications: Brand: CALCA Material: Glass, and copper wire lamp Capacity: 16oz. (500ml) Mug Size: H 5.4in (13.6cm), Φ 3.15in (8cm) Lid Size: Φ2.8in (7cm) Available Colors: Orange, Light Blue, Green, Purple, Rose Red, Yellow Mixed(6 x Orange, 6 x Light Blue, 6 x Green, 6 x Purple, 6 x Rose Red, 6 x Yellow) Finish: Frosted Gradient Print Applications: Dye-Sublimation Package: 36pcs/ctn Packing Size: 19.7in x 13.4in x 13.4in (500mm x 340mm x 340mm)/ctn Gross Weight: 35.2lbs (16kgs)/ctn Usages: Note: For best results we highly recommend pre pressing the jar for 10-15 seconds. Temperature and time settings are only a guide, please test in your press machine for accurate time and temperature. Use a Mug Press Referential Press Temprature: 356°F (180℃) Time: 80 Seconds Pressure: Medium/Firm Attach sublimation transfer paper with image printed in reverse to the mason jar with thermal tape. Place mason jar in press at the press temperature, and close the element around the jar. Press for the specified time above needed using specified pressure. If the image begins to look blurry, or burnt brown by over-pressing, decrease time by 15 - 30 seconds. Once done, remove the jar from the press and remove the transfer paper immediately. Allow the jar to cool completely before use. Warm Tips: 1. Please allow 0.5-1cm (0.2in - 0.4in) tolerance due to manual measurement. 2. In order to make the glass jar cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. 3. The color may exist slight difference due to different screen display. 4. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry. 5. For use with a mug press, Oven is not recommended
Ships to United States
US Stock, CALCA 36 Packs 11oz Sublimation Blanks Glass Clear Mug
Item Code: SUB-GLA-MUG-C11OZ-US-36PC
_sublimation_blanks_glass_clear_mug.html CALCA 36 Packs 11oz Sublimation Blanks Glass Clear Mug Specifications: 11oz Sublimation Blanks Clear Glass Mug Brand: CALCA Capacity: 11oz (312ml) Size: 3.7in (9.5cm) H, 3in (7.7cm) D Color: Clear Material: Clear glass Finish: Glossy Print Applications: Dye
Ships to United States
US Stock, CALCA 36 Packs 11oz Sublimation Blanks Glass Clear Mug (Local Pick-Up)
Item Code: SUB-GLA-MUG-C11OZ-PKU-US-36PC
Marks: The Products in US Stock, this is the price only for local pick-up. CALCA 36 Packs 11oz Sublimation Blanks Glass Clear Mug Specifications: 11oz Sublimation Blanks Clear Glass Mug Brand: CALCA Capacity: 11oz (312ml) Size: 3.7in (9.5cm) H, 3in (7.7cm) D Color: Clear Material: Clear glass
Ships to United States
16" x 24" 100pcs Sublimation Blanks Aluminum Sheet Metal Board Matte White 0.45mm
Item Code: SAS-045MM-MAT-4060-100PC
Description: Aluminum paint is a new-fashioned art display, throught the sublimation machine to transfer the sublimation ink onto the aluminum sheet directly, to keep your image with magical burnish.This fantastic and impressive art, shows vibrantcolours,miraculous gloss, and incomparable details and resolution.With hard, scratch-resistant, waterproof, oxidation-proof and easy cleaning surface, even keeping for 50years, the aluminum sheet still looks new. Inviting designer designs creative shapes for your photo to present individualization. High quality and durable.Widely used in wedding photography, copy paintings, home decorative paintings, advertising signs, medals, business cards, license plates, information boards, electronic product panels/casings, personalized metal gifts,etc. Feature: Meet USA&European quality standard. Eco-friendly imported polyester coating. Higher heat transfer rate, viviid color. Perfect coating surface, no dots and disordered veins. Professional safe export packaging. More than 20 different colors and surface finished, standing inventory. Custom size & thickness are available The corners can be rounded / right angle / custom angle Specification: • Material Thickness: 0.45mm (17.7mil) • Surface: Matte • Color: White • Size: 40cm x 60cm x 0.045cm (16" x 24" x 0.018") • Package: 100pcs/ctn • Packing Size: 41.5cm x 61.5cm x 5.5cm (16.3" x 24.2" x 2.2") / ctn • Gross Weight: 28kgs (61.6lbs) / ctn • Protection Film: PE film. • Heat transfer parameter: 200℃ and 60~90 seconds
Ships to United States
US Stock, CALCA 50 Pack Sublimation Blanks Double-Sided MDF Ornament DTF Benelux(Local Pick-Up)
Item Code: SUB-MDF-ORN-PKU-US-50PC
Customers in Other Countries Please Click Here to Order: CALCA 50 Pack Sublimation Blanks Double-Sided MDF Ornament DTF Benelux Marks: The Products in US Stock, this is the price only for local pick-up. US Stock, CALCA 50 Pack Sublimation Blanks Double-Sided MDF Ornament DTF Benelux(Local Pick-Up
Ships to United States
US Stock, CALCA 50 Pack Sublimation Blanks Double-Sided MDF Ornament DTF Benelux
Item Code: SUB-MDF-ORN-US-50PC
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA 50 Pack Sublimation Blanks Double-Sided MDF Ornament DTF
Ships to United States
CALCA 10pcs Sublimation Blanks Neoprene 20oz Skinny Straight Tumbler Sleeve Sublimation Tumblers Holder with Shoulder Strap
Item Code: HTB-NY-20OZBT-10PC
CALCA 10pcs Sublimation Blanks Neoprene 20oz Skinny Straight Tumbler Sleeve Sublimation Tumblers Holder with Shoulder Strap Specification: Material: Neoprene Package: 10pcs / pack Size: 7.5 cm x 20cm ( 2.95" x 7.87" ) Thickness: 2 mm ( 0.08" ) Weight: 91g (0.2 lbs) /PC Packing Size
Ships to United States
CALCA 24 Pack 16oz Frosted Sublimation Glass Mugs Blanks Bulk Mugs with Thick Matarial
Item Code: SUB-GLA-BE3-16OZ-24PC
CALCA 24 Pack 16oz Frosted Sublimation Glass Mugs Blanks Bulk Mugs with Thick Matarial Clear glass beer steins are classic and sturdy, made from thick transparent glass prepared for sublimation printing. The transparency of the material will give any colored design a subtle effect that can change
Ships to United States
US Stock, CALCA 36 Packs 11oz Sublimation Blanks Glass Frosted Mug
Item Code: SUB-GLA-MUG-FR11OZ-36PC-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA 36 Packs 11oz Sublimation Blanks Glass Frosted Mug
Ships to United States
US Stock, CALCA 30W Split Fiber Laser Marking Machine for Laser Engraving Tumbler, Raycus Laser + Rotation Axis, FDA
Item Code: LMM-JL-30W-S-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. US Stock, CALCA 30W Split Fiber Laser Marking Machine for Laser Engraving Tumbler, Raycus Laser + Rotation Axis, FDA The
Ships to United States
US Stock - RECI W6 / S6 130W-160W CO2 Sealed Laser Tube For 1390 / 1325 CO2 Laser Engraving Machine
Item Code: CS-LT-W6-US
The Products in US Stock Only Free Shipping to USA, Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: /products/6091/reci_w6_s6_130w_160w_co2_sealed_laser_tube.html High power rate, fast - speed cutting and small size Origin: Asia and Pacific Area China Quality standard: International H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc. Model Rated Power Max Power length Φ Catalyze Life span Warranty W6 130W 160W 1650mm 80mm Yes 10,000h 10 months We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Output Power: Its output power can reach 155w. The production process of the tube is standardized, so the output power and output model are guaranteed. (For other laser tube manufacturers: can’t provide this product) Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) High performance cost ratio: High output power, high efficiency, and high performance cost ratio. High photoelectric conversion rate: The output power will decrease for less than 2w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’s temperature is 42℃) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors). Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.) Length: The length is only 1.65m. It reduces the volume of the machine and minimizes freight cost.(The length of other 150w tubes is 1.8m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W6 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting. • High power cutting High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service) High performance cost ratio: When you buy Reci W6 130W-160W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. Label Negative electrode container Output mirror Product number in metal terminal Tube Model Sample Laser spot with depth of 5mm Operating Instruction Installation Requirement Make sure to follow the operation instructions of model W6 as shown in the illustration. The dedicated power DY20 should be equipped. The positive pole is in high voltage (The ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. Operation conditions • Water cooling: Using purified water; 3 to 5 liter / minute; water temperature: 10℃ - 40℃. • The operating environment: temperature 2 - 40℃, humidity 10-60%. • The working current: test current is 29mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. Working Performance • Cutting function. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way. Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. Tubes operated in wrong way will not be guaranteed by Manufacturer. How to check the laser? The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube. We need to exclude other reason of the problem. Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water. Secondly, make sure the mirrors, lens and light rought are all good. Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser. In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Ships to United States
US Stock, CALCA 30W Split Fiber Laser Marking Machine for Laser Engraving Mugs, Raycus Laser + Rotation Axis, FDA
Item Code: LMM-F-30W-S-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. US Stock, CALCA 30W Split Fiber Laser Marking Machine for Laser Engraving Mugs, Raycus Laser + Rotation Axis, FDA The
Ships to United States
51" x 35" 1390 Luxury Laser Engraving and Cutter, with EFR F4 100W-130W Laser Tube
Item Code: LCM-BY-Z1390-100W
Main Configuration: Max. Working Area: 51" x 35" (1300mm x 900mm) Max. Cutting Speed: 15.7" (400mm) / s Max. Engraving Speed: 23.6" (600mm) / s Laser Power: EFR F4 CO2 glass laser tube 100W-130W (Normal lifespan: about 10000 working hours) Max. Cutting Thickness (Acrylic): ≤1
Ships to United States
USA CVD ZnSe Focus Lens Dia. 12mm/0.47" FL 2" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM12
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens.The lens is 0.47" (12mm) in diameter, and focal lengths is 2" (50.8mm). It is coated for CO2 lasers at 10.6um wavelength.It is coated for CO2 lasers at 10.6um wavelength.This would be a great lens for a co2 engraver or laser cutter, to focus the beam into a tight spot. Used for:
Ships to United States
51" x 35" (1300mm x 900mm) Redsail X1390 Laser Engraving Cutting Machine, with Up and Down Table
Item Code: LCM-RS-X1390
51" x 35" (1300mm x 900mm) Redsail X1390 Laser Engraving Cutting Machine, with Up and Down Table The machine is a laser engraver and cutter equipped with Reci 100W CO2 Laser Tube, Auto Laser software, electric elevator, rotary shaft, and water cooler. It is used to engrave on wood
Ships to United States
S&A 3000TG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 220-240V, 50Hz
Item Code: CW-3000TGTY
engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.) Features： Specific disconnection alarm securing protection; High cost performance, low failure rate; Radiating Capacity is 50W / ℃; Forces circulation
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.) Features： Specific disconnection alarm securing protection; High cost performance, low failure rate; Radiating Capacity is 50W / ℃; Forces circulation
Ships to United States
2.2KW 24000rpm Water Cooled Spindle Motor for CNC Engraving Milling Grinding, 220V, Dia. 80 x 213mm
Item Code: CS-GDZ-80-22B-213
) Runout off: less than 0.01mm. Pass ISO9001 quality certification which means this item is the top quality item. Application: 1.Wood working industry, such as wood door engraving and cutting, furniture producing. 2.Marble engraving industry, such as tombstone engraving, carved marble
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 25mm / 0.98" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-25-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 25mm (0.98") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting
Ships to United States
CVD ZnSe Focus Lens Dia. 20mm FL1.5 - 5" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL20
working waveband in co2 laser industry reaches 99.8%; • The lens consist in many advantages such as precise focus, thin-film coating anti wiping, higher luminous flux, etc. For which materially improves your work efficiency. Benefits • Stable focus spot, better effect in cutting and engraving
Ships to United States
