Original 720MM Length Cutting Plotter Protection Guard Strip for Graphtec CE6000-60 Vinyl Cutter
Item Code: CS-GR-CGS05
This cutting strip for Graphtec CE6000-60. Description: Brand: Graphtec with self-adhesive Length: 720mm Width: 10mm
Ships to United States
Original 1340MM Length Cutting Plotter Protection Guard Strip for Graphtec CE6000-120 Vinyl Cutter
Item Code: CS-GR-CGS06
This cutting strip for Graphtec CE6000-120. Description: Brand: Graphtec with self-adhesive Length: 1340mm Width: 10mm
Ships to United States
Original 484MM Length Cutting Plotter Protection Guard Strip for Graphtec CE6000-40 Vinyl Cutter
Item Code: CS-GR-CGS04
This cutting strip for Graphtec CE6000-40. Description: Brand: Graphtec with self-adhesive Length: 484mm Width: 10mm
Ships to United States
A3 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky
Item Code: SIC-CM-CP-A3-2PC
• Non Slip. • Sticky Printed Grid • Durable and Convenient. • Comes with marking grids for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the
Ships to United States
Ving Tools 45 Degree Small Vinyl Cutter Blades for Foison vinyl cutting plotter, N Grade 5pcs/ pack
Item Code: RCCB-ROLAND45-N-FO
Description: Foison OEM blades are designed to replace your original blade for your Foison vinyl cutter. The 45 degree blades are meant for lighter vinyl or standard vinyl cutting. When your blade wears out, keep these replacement blades nearby so that you don t lose time during job production
Ships to United States
Ving Tools 30 Degree Small Vinyl Cutter Blades for Foison vinyl cutting plotter, N Grade 5pcs/ pack
Item Code: RCCB-ROLAND30-N-FO
Description: The 30 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting
Ships to United States
29" x 98´ Roll Silver Color Printable Heat Transfer Vinyl For T-shirt Fabric
Item Code: HTF-PC-004
. Using ECO solvent ink . PU material, using together with transparent transfer film . Image should be printed by print and cut printer, like Roland Description: This film is made of new kind of heat transfer material. This heat transfer film is enviroment-friendly, waterproof, tender touch feeling. And its flexibility is very good. Images on it are vivid and high resolution. ECO solvent ink is need when images printed on the film by print and cut printer. You can print any image you like on the transfer film and then cut it to transfer on the clothes, and any color is ok. Packing Details: CTN Size: 5.5"*5.5"*31.5" (14cm*14cm*80cm) G.W.: 17.6lb (8kg) Notes: If your order is less than the MOQ, you need to pay extra 15% fee. Certainly, we will give you a discount when you place lager order. How to operate:
Ships to United States
50" (1.27m) High Quality White Glue Self-adhesive Vinyl Film / Vehicle Wrap
Item Code: BS-SC100-50R-PY
Characteristics: • This Self-Adhesive Vinyl use the white glue. and the performation of coverage is well. • The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. • Use the removable glue, to ensure the cleanliness of
Ships to United States
54" (1.37m) High Quality Bubble-free Grey Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000G-54R-PY
Characteristics: . This Self-Adhesive Vinyl use the grey glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removabe glue, to ensure the cleanliness of
Ships to United States
60" (1.52m) High Quality White Glue Self-adhesive Vinyl Film / Vehicle Wrap
Item Code: BS-SC100-60R-PY
Characteristics: • The PVC film is of good ink absorption and colour penetration, the printing effect can be well guaranteed in terms of vivid colour expression. • The PVC Coated film with equality, stabilization variegation and anti-transformable character, it will never be distorted or ruptured in use. • With high quality glue • We use the import art paper, which ensure the product's flat surface. Usage: Advertising on bus, metro, etc. Large format printing, window decoration, temporary promotional and point of sale. Suitable for all kinds of solvent printers: Such as VUTEK, NUR, SCITEX, ARIZONA, SALASA, TECKWIN,YASELAN,FLORA, INFINITI, etc. Large-format vehicle pasters/advertisement stickers are widely used. Dry paste method The procedures and tools: clean rags, flake flattener • Clean the vehicle and keep it dry. • Strip off the transfer film (the transparent film which is pasted on the vehicle paster) and the vehicle paster together; in general situations, please simultaneously paste the sticker, flatten and stripping the release paper. • If the length and width of pasting area are less than 10 centimeters, you can paste after stripping off the transparent transfer film and sticker, but must pay attention on the unexpected adhesion or dust due to falling down. • Forcibly and obliquely flatten with a clean rag or flake flattener for several times until the paster has no any bubbles, then remove the transparent transfer film. We do not suggest solarizing or washing within 24 hours. Wet pasting method: it is suitable for wrapping large vehicles (two-person working together is recommended) The procedures and tools: water sprayer, clean rag, flake flattener, snap-Off Knife, blow dryer • After the vehicle body is cleaned, spray water on the area you paste with the paster by water sprayer– which is mainly used to reduce viscosity of the paster, and facilitate the position adjustment. • Once the pasting position is confirmed, strip up the paster along with the transfer film (the transparent film which is adhered on the Reflective wrapper), from right to left (or top to bottom), press and flatten them onto the vehicle body with rag, at the same time, peel off the release paper. • Regarding to the handle or the bumper strip, cut off or enfold the paster according to the circumstance. • Timely adjust the position of the graphics, repeatedly scrape off the bubbles and water with flake flattener from right to left in an oblique way after the position of the graphics is confirmed, and finally remove the transparent transfer film. • Cut off when coming to the door and joint with snap-Off Knife, and paste the paster inwards wherever possible. • Dry the water underneath the paster as much as possible, and use the blow dryer to heat moderately if the condition allows. Suggestion: We suggest neither to solarize the vehicle within 24 hours, nor to wash it within 48 hours as far as possible. Note: For the Durability of PVC Film, 1 years. Ideal Storge Condition: Temperature 22℃, relative humidity 50%. The standard length for one roll is 164.0'' (50m). Quality Inspection:
Ships to United States
54" (1.37m) High Quality White Glue Self-adhesive Vinyl Film / Vehicle Wrap
Item Code: BS-SC100-54R-PY
Characteristics: • The PVC film is of good ink absorption and colour penetration, the printing effect can be well guaranteed in terms of vivid colour expression. • The PVC Coated film with equality, stabilization variegation and anti-transformable character, it will never be distorted or ruptured in use. • With high quality glue • We use the import art paper, which ensure the product's flat surface. Usage: Advertising on bus, metro, etc. Large format printing, window decoration, temporary promotional and point of sale. Suitable for all kinds of solvent printers: Such as VUTEK, NUR, SCITEX, ARIZONA, SALASA, TECKWIN,YASELAN,FLORA, INFINITI, etc. Large-format vehicle pasters/advertisement stickers are widely used. Dry paste method The procedures and tools: clean rags, flake flattener • Clean the vehicle and keep it dry. • Strip off the transfer film (the transparent film which is pasted on the vehicle paster) and the vehicle paster together; in general situations, please simultaneously paste the sticker, flatten and stripping the release paper. • If the length and width of pasting area are less than 10 centimeters, you can paste after stripping off the transparent transfer film and sticker, but must pay attention on the unexpected adhesion or dust due to falling down. • Forcibly and obliquely flatten with a clean rag or flake flattener for several times until the paster has no any bubbles, then remove the transparent transfer film. We do not suggest solarizing or washing within 24 hours. Wet pasting method: it is suitable for wrapping large vehicles (two-person working together is recommended) The procedures and tools: water sprayer, clean rag, flake flattener, snap-Off Knife, blow dryer • After the vehicle body is cleaned, spray water on the area you paste with the paster by water sprayer– which is mainly used to reduce viscosity of the paster, and facilitate the position adjustment. • Once the pasting position is confirmed, strip up the paster along with the transfer film (the transparent film which is adhered on the Reflective wrapper), from right to left (or top to bottom), press and flatten them onto the vehicle body with rag, at the same time, peel off the release paper. • Regarding to the handle or the bumper strip, cut off or enfold the paster according to the circumstance. • Timely adjust the position of the graphics, repeatedly scrape off the bubbles and water with flake flattener from right to left in an oblique way after the position of the graphics is confirmed, and finally remove the transparent transfer film. • Cut off when coming to the door and joint with snap-Off Knife, and paste the paster inwards wherever possible. • Dry the water underneath the paster as much as possible, and use the blow dryer to heat moderately if the condition allows. Suggestion: We suggest neither to solarize the vehicle within 24 hours, nor to wash it within 48 hours as far as possible. Note: For the Durability of PVC Film, 1 year. Ideal Storge Condition: Temperature 22℃, relative humidity 50%. The standard length for one roll is 164.0'' (50m). Quality Inspection:
Ships to United States
54" (1.37m) High Polymer Grey Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV700G-54R-PY
Characteristics: . This Self-Adhesive Vinyl use the grey glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness
Ships to United States
60" (1.52m) High Quality Bubble-free Black Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000B-60R-PY
Characteristics: . This Self-Adhesive Vinyl use the black glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness of
Ships to United States
36" (0.914m) High Quality White Glue Self-adhesive Vinyl Film / Vehicle Wrap
Item Code: BS-SC100-38R-PY
Characteristics: • The PVC film is of good ink absorption and colour penetration, the printing effect can be well guaranteed in terms of vivid colour expression. • The PVC Coated film with equality, stabilization variegation and anti-transformable character, it will never be distorted or ruptured in use. • With high quality glue • We use the import art paper, which ensure the product's flat surface. Usage: Advertising on bus, metro, etc. Large format printing, window decoration, temporary promotional and point of sale. Suitable for all kinds of solvent printers: Such as VUTEK, NUR, SCITEX, ARIZONA, SALASA, TECKWIN,YASELAN,FLORA, INFINITI, etc. Large-format vehicle pasters/advertisement stickers are widely used. Dry paste method The procedures and tools: clean rags, flake flattener • Clean the vehicle and keep it dry. • Strip off the transfer film (the transparent film which is pasted on the vehicle paster) and the vehicle paster together; in general situations, please simultaneously paste the sticker, flatten and stripping the release paper. • If the length and width of pasting area are less than 10 centimeters, you can paste after stripping off the transparent transfer film and sticker, but must pay attention on the unexpected adhesion or dust due to falling down. • Forcibly and obliquely flatten with a clean rag or flake flattener for several times until the paster has no any bubbles, then remove the transparent transfer film. We do not suggest solarizing or washing within 24 hours. Wet pasting method: it is suitable for wrapping large vehicles (two-person working together is recommended) The procedures and tools: water sprayer, clean rag, flake flattener, snap-Off Knife, blow dryer • After the vehicle body is cleaned, spray water on the area you paste with the paster by water sprayer– which is mainly used to reduce viscosity of the paster, and facilitate the position adjustment. • Once the pasting position is confirmed, strip up the paster along with the transfer film (the transparent film which is adhered on the Reflective wrapper), from right to left (or top to bottom), press and flatten them onto the vehicle body with rag, at the same time, peel off the release paper. • Regarding to the handle or the bumper strip, cut off or enfold the paster according to the circumstance. • Timely adjust the position of the graphics, repeatedly scrape off the bubbles and water with flake flattener from right to left in an oblique way after the position of the graphics is confirmed, and finally remove the transparent transfer film. • Cut off when coming to the door and joint with snap-Off Knife, and paste the paster inwards wherever possible. • Dry the water underneath the paster as much as possible, and use the blow dryer to heat moderately if the condition allows. Suggestion: We suggest neither to solarize the vehicle within 24 hours, nor to wash it within 48 hours as far as possible. Note: For the Durability of PVC Film, 1 year. Ideal Storge Condition: Temperature 22℃, relative humidity 50%. The standard length for one roll is 164.0'' (50m). Quality Inspection:
Ships to United States
50" (1.27m) High Polymer Grey Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV700G-50R-PY
Characteristics: . This Self-Adhesive Vinyl use the grey glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness
Ships to United States
60" (1.52m) High Quality Bubble-free White Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000W-60R-PY
Characteristics: • The PVC film is of good ink absorption and colour penetration, the printing effect can be well guaranteed in terms of vivid colour expression. • The PVC Coated film with equality, stabilization variegation and anti-transformable character, it will never be distorted or ruptured in use. • With high quality glue • We use the import art paper, which ensure the product's flat surface. Usage: Advertising on bus, metro, etc. Large format printing, window decoration, temporary promotional and point of sale. Suitable for all kinds of solvent printers: Such as VUTEK, NUR, SCITEX, ARIZONA, SALASA, TECKWIN,YASELAN,FLORA, INFINITI, etc. Large-format vehicle pasters/advertisement stickers are widely used. Dry paste method The procedures and tools: clean rags, flake flattener • Clean the vehicle and keep it dry. • Strip off the transfer film (the transparent film which is pasted on the vehicle paster) and the vehicle paster together; in general situations, please simultaneously paste the sticker, flatten and stripping the release paper. • If the length and width of pasting area are less than 10 centimeters, you can paste after stripping off the transparent transfer film and sticker, but must pay attention on the unexpected adhesion or dust due to falling down. • Forcibly and obliquely flatten with a clean rag or flake flattener for several times until the paster has no any bubbles, then remove the transparent transfer film. We do not suggest solarizing or washing within 24 hours. Wet pasting method: it is suitable for wrapping large vehicles (two-person working together is recommended) The procedures and tools: water sprayer, clean rag, flake flattener, snap-Off Knife, blow dryer • After the vehicle body is cleaned, spray water on the area you paste with the paster by water sprayer– which is mainly used to reduce viscosity of the paster, and facilitate the position adjustment. • Once the pasting position is confirmed, strip up the paster along with the transfer film (the transparent film which is adhered on the Reflective wrapper), from right to left (or top to bottom), press and flatten them onto the vehicle body with rag, at the same time, peel off the release paper. • Regarding to the handle or the bumper strip, cut off or enfold the paster according to the circumstance. • Timely adjust the position of the graphics, repeatedly scrape off the bubbles and water with flake flattener from right to left in an oblique way after the position of the graphics is confirmed, and finally remove the transparent transfer film. • Cut off when coming to the door and joint with snap-Off Knife, and paste the paster inwards wherever possible. • Dry the water underneath the paster as much as possible, and use the blow dryer to heat moderately if the condition allows. Suggestion: We suggest neither to solarize the vehicle within 24 hours, nor to wash it within 48 hours as far as possible. Note: For the Durability of PVC Film, 1 years. Ideal Storge Condition: Temperature 22℃, relative humidity 50%. The standard length for one roll is 164.0'' (50m). Quality Inspection:
Ships to United States
54" (1.37m) High Polymer Black Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV700B-54R-PY
Characteristics: • This Self-Adhesive Vinyl use the black glue. it has the thicker surface film and bottom paper to ensure the effection of the ink obsorbing and the submission of the printing. • The surface film has the good performance of the ink obsorbing, can be applied
Ships to United States
42" (1.07m) High Quality Bubble-free Black Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000B-42R-PY
Characteristics: . This Self-Adhesive Vinyl use the black glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness of
Ships to United States
42" (1.07m) High Quality Bubble-free White Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000W-42R-PY
Characteristics: • The PVC film is of good ink absorption and colour penetration, the printing effect can be well guaranteed in terms of vivid colour expression. • The PVC Coated film with equality, stabilization variegation and anti-transformable character, it will never be distorted or ruptured in use. • With high quality glue • We use the import art paper, which ensure the product's flat surface. Usage: Advertising on bus, metro, etc. Large format printing, window decoration, temporary promotional and point of sale. Suitable for all kinds of solvent printers: Such as VUTEK, NUR, SCITEX, ARIZONA, SALASA, TECKWIN,YASELAN,FLORA, INFINITI, etc. Large-format vehicle pasters/advertisement stickers are widely used. Dry paste method The procedures and tools: clean rags, flake flattener • Clean the vehicle and keep it dry. • Strip off the transfer film (the transparent film which is pasted on the vehicle paster) and the vehicle paster together; in general situations, please simultaneously paste the sticker, flatten and stripping the release paper. • If the length and width of pasting area are less than 10 centimeters, you can paste after stripping off the transparent transfer film and sticker, but must pay attention on the unexpected adhesion or dust due to falling down. • Forcibly and obliquely flatten with a clean rag or flake flattener for several times until the paster has no any bubbles, then remove the transparent transfer film. We do not suggest solarizing or washing within 24 hours. Wet pasting method: it is suitable for wrapping large vehicles (two-person working together is recommended) The procedures and tools: water sprayer, clean rag, flake flattener, snap-Off Knife, blow dryer • After the vehicle body is cleaned, spray water on the area you paste with the paster by water sprayer– which is mainly used to reduce viscosity of the paster, and facilitate the position adjustment. • Once the pasting position is confirmed, strip up the paster along with the transfer film (the transparent film which is adhered on the Reflective wrapper), from right to left (or top to bottom), press and flatten them onto the vehicle body with rag, at the same time, peel off the release paper. • Regarding to the handle or the bumper strip, cut off or enfold the paster according to the circumstance. • Timely adjust the position of the graphics, repeatedly scrape off the bubbles and water with flake flattener from right to left in an oblique way after the position of the graphics is confirmed, and finally remove the transparent transfer film. • Cut off when coming to the door and joint with snap-Off Knife, and paste the paster inwards wherever possible. • Dry the water underneath the paster as much as possible, and use the blow dryer to heat moderately if the condition allows. Suggestion: We suggest neither to solarize the vehicle within 24 hours, nor to wash it within 48 hours as far as possible. Note: For the Durability of PVC Film, 1 years. Ideal Storge Condition: Temperature 22℃, relative humidity 50%. The standard length for one roll is 164.0'' (50m). Quality Inspection:
Ships to United States
50" (1.27m) High Quality Bubble-free Black Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000B-50R-PY
Characteristics: . This Self-Adhesive Vinyl use the black glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness of
Ships to United States
60" (1.52m) High Polymer Black Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV700B-60R-PY
Characteristics: • This Self-Adhesive Vinyl use the black glue. it has the thicker surface film and bottom paper to ensure the effection of the ink obsorbing and the submission of the printing. • The surface film has the good performance of the ink obsorbing, can be applied
Ships to United States
42" (1.07m) High Polymer White Glue Self Adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV700W-42R-PY
Characteristics: . This Self-Adhesive Vinyl use the grey glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removable glue, to ensure the cleanliness of the bottom
Ships to United States
50" (1.27m) High Quality Bubble-free Grey Glue Self-adhesive Vinyl Film/Vehicle Wrap
Item Code: BS-PV7000G-50R-PY
Characteristics: . This Self-Adhesive Vinyl use the grey glue. and the performation of coverage is well. . The surface film has the good performance of the ink obsorbing, can be applied to a wide range of inkjet printers. . Use the removabe glue, to ensure the cleanliness of
Ships to United States