Cart 
Order Tracking
20" x 5ft Premium 4D Glossy Carbon Fiber Vinyl Car Auto Wrap Sticker with Air Release
Item Code: BS-CL-4D-A
Description: The benefit of wraps- •Protect the paint, protect the value • To prevent sand splash damaging the body, to cover body scratch. • To refract harmful light, cut off the damage of strong light and UV for car lacquer, protect the original paint gloss and durability. • To resist most of oil, grease, fuel, fat solvent, weak acid, weak salt. Also cut off the acid rain, snow melt agent on the car body erosion. • Toughness reply force improve 10 times above, automatically bridge the small scratches, resist general cut, friction and wear. • To protect the vehicles degree of copying new look. Specification: • Size: 20" x 5ft (50cm x 152cm) • Finish: Glossy • Surface Material Thickness: 0.12mm • Bottom Paper Weight: 140g/m2 • Glue Thickness: 30μm • Glue Color: Clear • Outdoor Use: 3years • Construction Method: Dry Method Color For Reference: Advantage: Usage: Application:
Ships to United States
US Stock, Qomolangma Semi-Automatic Banner Welder Hemming System, Alternative to Sewing and Taping for Vinyl and Fabric
Item Code: QLM-RBW-1500-US
to Sewing and Taping for Vinyl and Fabric US Stock, Qomolangma Semi-Automatic Banner Welder Hemming System, Alternative to Sewing and Taping for Vinyl and Fabric Welding is a popular finishing technique for wide format graphics production. An alternative to sewing, welding is ideal for finishing
Ships to United States
19.7" x 98´ Roll White Color Eco-Solvent Printable Heat Transfer Vinyl For Dark T-shirt Fabric
Item Code: HTF-300SR
/box 9.Heat Tips: After printing, cutting the extra white edge and peel off, use the polyester transfer film transfer the picture you need heat ,add one piece of white cotton, it will make the heated image will more colorful. 10.Washing time more than 120Times. Specification: • Width: 19.7"
Ships to United States
23.6" x 5yard Roll White Color Eco-Solvent Printable Heat Transfer Vinyl For Dark T-shirt Fabric
Item Code: HTF-300SE-5Y
printing, cutting the extra white edge and peel off, use the polyester transfer film transfer the picture you need heat, add one piece of white cotton, it will make the heated image will more colorful • Washing time: more than 120 times • Packing Size: 65x 15 x 15cm (25.6in x 5.9in x 5.9in) &bull
Ships to United States
US Stock, 10 pcs Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter(4 x 10 x 14mm)
Item Code: CS-MIM-PRW-10P-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter(4 x 10 x 14mm
Ships to United States
US Stock, 4 pcs Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter(4 x 10 x 14mm)
Item Code: CS-MIM-PRW-4P-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Silica Gel Pinch Roller Wheel for MIMAKI Vinyl Cutter(4 x 10 x 14mm
Ships to United States
S&A CW-6300BN Industrial Water Chiller for CNC CO2 Laser Cutting Machine 4.28HP, AC 1P 220V 60HZ
Item Code: CW-6300BNTY
Description: S&A CW-6300 series is high-precision compression refrigeration small water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. Features: 1. Cooling Capacity: 8500W 2. Active cooling 3. Temperature stability: ±1°C 4. Temperature control range: 5°C ~35°C 5. Refrigerant: R-410a 6. Intelligent temperature controller 7. Multiple alarm functions 8. Ready for immediate use 9. Easy maintenance and mobility 10. RS-485 Modbus communication function 11. Available in 220V or 380V Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local. PROUCT PARAMETERS Model CW-6300BN Power Supply AC 1P 220V, 60Hz Current 3.9~29.3A Machine powe 5.44KW Compressor Power 2.71kW, 4.28HP Nominal cooling capacity 32423Btu/h, 8.24kW, 8168Kcal/h Refrigerant 2100g Refrigerant Charge R-410a Precision ±1℃ Tank Capacity 40L Reducer Capillary Pump Power 0.75kW Inlet and Outlet Rp1" Pump pressure 5.3bar Max.flow 75L / min Net Weight 123Kg(271lb) Gross Weight 150Kg(330.7lb) Dimension 32.7" x 25.6" x 46.1" (83 x 65 x 117cm) Package Dimension 37.4" x 30.3" x 53" (95 x 77 x 135cm) Product Details Intelligent temperature controller The temperature controller offers high precision temperature control of ±1°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Caster wheels for easy mobility Four caster wheels offer easy mobility and unmatched flexibility. Cooling fan of famous brand installed with high quality and low failure rate. Customized dust gauze available and easy to take apart. Ventilation Distance Certificate Product Working Principle
Ships to United States
US Stock, 59" x 118" 1530 700W Nlight Fiber Laser Cutter for Metal Sheet Cutting
Item Code: LCM-XJG-150300DT-P700-US
Customers in Other Countries Please Click Here to Order: https://www.sign-in-china.com/products/18822/59 quot_x_118_quot_1530 700w_nlight_fiber laser_cutter_for metal_sheet cutting.html Laser Cutting Machine integrates optical, mechanical and electrical in one, which adopts laser technology
Ships to United States
CALCA 25pcs 11in x 7.9in Sublimation Blanks Boards Tempered Glass Cutting Board Sublimation Blanks with White Coating Rough
Item Code: CS-MK-GCBR-S-25PC
CALCA 25pcs 11in x 7.9in Sublimation Blanks Boards Tempered Glass Cutting Board Sublimation Blanks with White Coating Rough Discriptions: • CALCA sublimation glass cutting board will spice up kitchen cutting. Sanitary work surface resists stains and odors,durable,long-lasting,impact resistant
Ships to United States
A4 8.3in x 11.7in Fine Cutting Inkjet Transfer Paper for T-shirt Heat Transfer Paper, 100 Sheets Pack
Item Code: HTPI-300R-A4-100PC
, after heating, the image will brighter, washing time above 120times 8. Use the Cutting Plotter cutting the paper coating side, remove the white edge, peel off the image you need by hand or use the transfer film transfer 9. Available Size: A4/A, A3/B, 0.42 x 30M Transferring Instructions: 1. Printing
Ships to United States
Ving 100W Durable and Practical Hand Held Hot Heating Knife Cutter Tool for Rope and Fabric Cutting
Item Code: CS-ZH-RTH8-110
Features: • Durable and Practical. • No rough burr after cutting. • Power saving, only 100W. • Long life span and can non-stop run . • Much lighter and easier for shipping with low freight cost. Specification: Voltage: 110V±10% Power: 100W Speed
Ships to United States
US Stock-100W 110V Durable and Practical Handheld Hot Heating Knife Cutter Tool for Fabric and Rope Cutting
Item Code: CS-ZH-RTH8-US
Customers in Other Countries Please Click Here to Order: /products/17047/100w durable and practical hand held hot heating knife cutter tool for rope and fabric cutting.html Features: • Durable and Practical. • No rough burr after cutting. • Power saving, only 100W. &bull
Ships to United States
USA CVD ZnSe Focus Lens Dia. 12mm/0.47" FL 2" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM12
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens.The lens is 0.47" (12mm) in diameter, and focal lengths is 2" (50.8mm). It is coated for CO2 lasers at 10.6um wavelength.It is coated for CO2 lasers at 10.6um wavelength.This would be a great lens for a co2 engraver or laser cutter, to focus the beam into a tight spot. Used for:
Ships to United States
A1 Self-Healing Non Slip Double Sided PVC Cutting Mat 24" x 35" (90cm x 60cm)
Item Code: SIC-HL-CM-9060
Description: Material: PVC Color: dark green • Comes with marking grids for accurate cutting. • Non-slip surface - for cutting paper, card and other materials. • 60 x 90 cm size Cutting Mat/ Board with measurements on both sides in cm. • High quality self-healing
Ships to United States
Solid Carbide 1 Flute Spiral CNC Cutting Bits (SHK about 6.35mm, 8mm, 10mm, 12mm, 12.7mm, 16mm, 20mm)
Item Code: EC-1LX635810
About Materials: At present, we have N, A, AA, 3A, four kinds of materials. · The N series material stands for tungsten steel material made in China and its rigidity is at 88-89HRA (Rockwell Hardness, A Scale). · The A series cnc router bits are made of tungsten steel material from Taiwan and their rigidity at 90-91HRA., HRC of material to be processed is 45. · The AA series cnc router bits stand for German ultrafine tungsten steel and rigidity is at 93-94HRA, HRC of material to be processed is 50. · The 3A series cnc router bits stand for German best quality ultrafine tungsten steel and rigidity is at around 96HRA. HRC of material to be processed is 60. The better quality of material is, the higher rigidity and durability as well as materially longer lifespan. The stronger rigidity it is, the bits won’t distort during process and give better processing effect. And the more fine tungsten steel’s particle is, the sharp bits of the blade polished as a result for better processing effect. Usage Tips: It is important that you choose a tip size when ordering your engraving tools. The tip size will determine how wide your line is. For small character engraving choose a smaller tip size. For example when engraving 1/8" tall letters use a .010 or .015 tip, but for 1/4" tall letters use a .020 or .030 tip. The taller the letters or characters is, the larger the tip size of the cutter should be. For example; for 1/4" tall letters you should use a .020 or .030 tip but for 1/8" tall letters a .010 or .015 tip would be better. Remark: Please Choose the Model when ordering. Specification: Model CED(mm) CEL(mm) SHK(mm) OVL(mm) EC-1LX6.17 6.4 17 6.35 50 EC-1LX6.22 6.4 22 6.35 50 EC-1LX6.25 6.4 25 6.35 55 EC-1LX825 8 25 8 60 EC-1LX835 8 35 8 80 EC-1LX845 8 45 8 90 EC-1LX855 8 55 8 100 EC-1LX1025 10 25 10 60 EC-1LX1035 10 35 10 80 EC-1LX1045 10 45 10 90 EC-1LX1055 10 55 10 100 EC-1LX1075 10 75 10 120 EC-1LX1235 12 35 12 80 EC-1LX1245 12 45 12 90 EC-1LX1255 12 55 12 100 EC-1LX1275 12 75 12 120 EC-1LX12.35 12.7 35 12.7 80 EC-1LX12.45 12.7 45 12.7 90 EC-1LX12.55 12.7 55 12.7 100 EC-1LX12.75 12.7 75 12.7 130 EC-1LX1645 16 45 16 100 EC-1LX1655 16 55 16 110 EC-1LX1665 16 65 16 120 EC-1LX1675 16 75 16 150 EC-1LX2075 20 75 20 150 Product Details:
Ships to United States
250W Heavy Duty Electric Hand Held Hot Knife Cutter Tool with 250mm Blade for Foam and Sponge Cutting
Item Code: CS-ZH-RTH8500-4
Specification: Voltage: 110V±10% / 220V±10% Power: 250W Length of the Wire: 1.5M Dimesion: 24 x 4.5 x 3.5cm Weight: 348g Feature: • 1/4 minute intermittent operation. • No rough edges after cutting. • Long life span and can work continuously. • Much lighter
Ships to United States
51" x 35" (1300mm x 900mm) Redsail X1390 Laser Engraving Cutting Machine, with Up and Down Table
Item Code: LCM-RS-X1390
51" x 35" (1300mm x 900mm) Redsail X1390 Laser Engraving Cutting Machine, with Up and Down Table The machine is a laser engraver and cutter equipped with Reci 100W CO2 Laser Tube, Auto Laser software, electric elevator, rotary shaft, and water cooler. It is used to engrave on wood
Ships to United States
150W Heavy Duty Electric Hand Held Hot Heating Knife Cutter Tool with 100mm Blade For Foam and Sponge Cutting
Item Code: CS-ZH-RTH8500-1
Specification: Voltage: 110V±10% / 220V±10% Power: 150W Length of the Wire: 1.5M Dimesion: 24 x 4.5 x 3.5cm Weight: 348g Feature: • Hot Knife Blade is changeable for 150mm blade and 100mm blade. • 1/4 minute intermittent operation. • No rough edges after cutting
Ships to United States
