Cart 
Order Tracking
Original EFR ES150 Power Supply with PFC Function, for F6, F8, F10, ZS1650, ZS1850 CO2 Sealed Laser Tube
Item Code: CS-PS-ES150
EFR F6, F8, F10, ZS1650, ZS1850 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple
Ships to United States
Loop Rubber Timing Belt 300-3M for CO2 Laser Cutter, 15mm Width and 300mm Length, Pitch 3mm
Item Code: CS-BLT-300-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 300mm Sleeve Width: 450mm Teeth No.: 100mm
Ships to United States
CVD ZnSe Focus Lens Dia. 18mm FL 38.1mm / 50.8mm / 63.5mm for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL18
lens for a CO2 engraver or laser cutter, to focus the beam into a tight spot. This lens is NEW in the original FACTORY BOX and is untouched. You get an unopened box. Note: Please choose the focus length when you make an order. Features: Diameter: 0.7" (18mm) Focal Length: 1.5" (38.1mm
Ships to United States
Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm
Item Code: CS-BLT-384-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 384mm Sleeve Width: 450mm Teeth No.: 128mm
Ships to United States
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P12
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V Description: P12, intelligent protection features: Wide volt (90V-250V) input, short circuit protection, open circuit protection, with the input, the signal detection, temperature and
Ships to United States
Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm
Item Code: CS-BLT-327-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 327mm Sleeve Width: 450mm Teeth No.: 109mm
Ships to United States
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P14
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V Description P14, wideband and wide volt input, multi protections, the input could show the signal detection, the electric signal of machine tool control card as well as the fault analysis of
Ships to United States
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P16
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V Description: P16, Function Features: The power supply is capable to monitor the working condition of laser machine tool in real time, analyze the problem intelligently and provide solution to
Ships to United States
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P18
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V Description P18, Function features: Wideband and wide volt input, multi protections, showing the electric signal of machine tool control card, monitoring the feedback electric signal of laser
Ships to United States
50W CO2 Laser Engraving Machine 12" x 20" Work Table with Y-axis Rotary Roller
Item Code: LCM-KH-5030-50W
50W CO2 Laser Engraving Machine 12" x 20" Work Table with Y-axis Rotary Roller This 50W CO2 Laser Engraver integrates a lot of upgraded and advanced technologies, all of which guarantee the good quality of high precise and speed. It is a suitable machine to process various nonmetal
Ships to United States
11" x 19" (300mm x 500mm) CO2 Laser Cutting and Engraving Machine with double side open door
Item Code: LCM-RS-M3050
. Our machines are the most robust, accurate, and reliable on the market. Working size: 11" x 19" (300mm x 500mm) with double side open door Worktable: Electric Up & Down Platform Laser tube type: Co2 Glass sealed laser tube Laser power: 50W Driver type: Micro Stepping Motor Max speed
Ships to United States
US Stock 50W CO2 Laser Engraving Machine 12" x 20" Work Table with Y-axis Rotary Roller
Item Code: LCM-KH-5030-50W-US
The Products in US Stock Only Free Shipping to USA, Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: 50W CO2 Laser Engraving Machine 12" x 20" Work Table with
Ships to United States
US Stock,CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate
Item Code: LCM-DR-1390-130W-US
plating in the inner wall of the laser tube. working life is up to 10000 hours. When compare to the same length tube, RECI W6 co2 laser tube is New firing technology is used to join metal parts and glass parts together directly. This new technology makes the high stability in W series laser tubes
Ships to United States
S&A CW-6300EN Industrial Water Chiller for CNC CO2 Laser Cutting Machine 3.60HP, AC 3P 380V 50HZ
Item Code: CW-6300ENTY
Description: S&A CW-6300 series is high-precision compression refrigeration small water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. Features: 1. Cooling Capacity: 8500W 2. Active cooling 3. Temperature stability: ±1°C 4. Temperature control range: 5°C ~35°C 5. Refrigerant: R-410a 6. Intelligent temperature controller 7. Multiple alarm functions 8. Ready for immediate use 9. Easy maintenance and mobility 10. RS-485 Modbus communication function 11. Available in 220V or 380V Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. PROUCT PARAMETERS Model CW-6300EN Power Supply AC 3P 380V, 50Hz Current 1.2~12.6A Machine power 5.52KW Compressor Power 2.65KW, 3.61HP Nominal cooling capacity 27440Btu/h 8.04KW 6913Kcal/h Refrigerant 2350g Refrigerant Charge R-410a Precision ±1℃ Tank Capacity 40L Reducer Capillary Pump Power 0.75KW Inlet and Outlet Rp1" Pump pressure 5.4bar Max.flow 75L / min Net Weight 121Kg(266.8lb) Gross Weight 145Kg(319.7lb) Dimension 32.7" x 25.6" x 46.1" (83 x 65 x 117cm) Package Dimension 37.4" x 30.3" x 53" (95 x 77 x 135cm) Product Details Intelligent temperature controller The temperature controller offers high precision temperature control of ±1°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Caster wheels for easy mobility Four caster wheels offer easy mobility and unmatched flexibility. Cooling fan of famous brand installed with high quality and low failure rate. Customized dust gauze available and easy to take apart. Ventilation Distance Certificate Product Working Principle
Ships to United States
S&A CW-7500EN Industrial Refrigeration System (6.73HP, AC 3P 380V, 50HZ) for 600W CO2 Laser Machine
Item Code: CW-7500ENTY
S&A CW-7500EN Industrial Refrigeration System (6.73HP, AC 3P 380V, 50HZ) for 600W CO2 Laser Machine Description: S&A CW-7500 remote control series is high-precision compression refrigeration small water chiller, available for remote control, with intelligent temperature control,completed
Ships to United States
S&A CW-7500FN Industrial Refrigeration System (8.02HP, AC 3P 380V, 60HZ) for 600W CO2 Laser Machine
Item Code: CW-7500FNTY
S&A CW-7500FN Industrial Refrigeration System (8.02HP, AC 3P 380V, 60HZ) for 600W CO2 Laser Machine Description: S&A CW-7500 remote control series is high-precision compression refrigeration small water chiller, available for remote control, with intelligent temperature control,completed
Ships to United States
S&A CW-6300AN Industrial Water Chiller for CNC CO2 Laser Cutting Machine 3.59HP, AC 1P 220V 50HZ
Item Code: CW-6300ANTY
Description: S&A CW-6300 series is high-precision compression refrigeration small water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes. Features: 1. Cooling Capacity: 8500W 2. Active cooling 3. Temperature stability: ±1°C 4. Temperature control range: 5°C ~35°C 5. Refrigerant: R-410a 6. Intelligent temperature controller 7. Multiple alarm functions 8. Ready for immediate use 9. Easy maintenance and mobility 10. RS-485 Modbus communication function 11. Available in 220V or 380V Tips: Make sure the refrigerant is filled before running the chiller. Refrigerant is forbidden by express company, so we could not put it into the package.You can buy it locally and fill it out. If the compressor of this chiller has not been filled with refrigerant. Please make sure it has been filled correctly according to the Filling Requirements paper put in the accessories box before running the chiller. PROUCT PARAMETERS Model CW-6300AN Power Supply AC 1P 220V, 50Hz Current 3.4~26.3A Machine powe 5.24KW Compressor Power 2.64KW, 3.59HP Nominal cooling capacity 26826Btu/h, 7.86kW, 6758Kcal/h Refrigerant 2150g Refrigerant Charge R-410a Precision ±1℃ Tank Capacity 40L Reducer Capillary Pump Power 0.55KW Inlet and Outlet Rp1" Pump pressure 4.4bar Max.flow 75L / min Net Weight 113Kg(249lb) Gross Weight 140Kg(308.6lb) Dimension 32.7" x 25.6" x 46.1" (83 x 65 x 117cm) Package Dimension 37.4" x 30.3" x 53" (95 x 77 x 135cm) Product Details Intelligent temperature controller The temperature controller offers high precision temperature control of ±1°C and two user-adjustable temperature control modes - constant temperature mode and intelligent control mode. Easy-to-read water level indicator The water level indicator has 3 color areas - yellow, green and red. Yellow area - high water level. Green area - normal water level. Red area - low water level. Caster wheels for easy mobility Four caster wheels offer easy mobility and unmatched flexibility. Cooling fan of famous brand installed with high quality and low failure rate. Customized dust gauze available and easy to take apart. Ventilation Distance Certificate Product Working Principle
Ships to United States
CO2 Laser Cutting Head with Air Assist and Laser Dot Frame for Installing Dia 20mm Lens and Dia 25mm / 1" Mirror
Item Code: LM-C-MP-H
CO2 laser cutting head with Air Assist and Laser Dot Frame for installing Dia 20mm Lens and Dia 25mm Mirror, Suitable for cutting non-metal only. Technical Specifications: Adjustable Length: 0-2" (0-50mm) Mirror Diameter: 1" (25mm) Len Diameter: 0.8" (20mm) Focal Lengths: 2" (50
Ships to United States
US Stock,CALCA RECI 90W 20" x 28" CO2 Laser Engraver and Cutter, Electric Lift Bed, Industrial Water Chiller, Compatible with LightBurn Software
Item Code: LCM-RS-X700-US
to 10000 hours. When compare to the same length tube, RECI W2 co2 laser tube is New firing technology is used to join metal parts and glass parts together directly. This new technology makes the high stability in W series laser tubes. Digital Operation Panel It features DSP Control System for RDdraw
Ships to United States
US Stock,CALCA 80W 20" x 28" CO2 Laser Engraver and Cutter Machines with Ruida DSP RDWorks V8, Compatible with LightBurn Software
Item Code: LCM-KH-750-80W-US
_machines.html CALCA 80W 20" x 28" CO2 Laser Engraver and Cutter Machines with Ruida DSP RDWorks V8, Compatible with LightBurn Software This Laser Engraver is equipped with 80W CO2 laser tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and
Ships to United States
20" x 28" (500mm x 700mm) 90W CO2 Laser Cutter, with Double Side Open Door, with USB Port and Electric Lifting Worktable
Item Code: LCM-RS-X700
20"x28"(500mm x 700mm) 90W CO2 Laser Cutter, with double side open door, with USB Port and Electric Lifting Worktable The machine is a laser engraver and cutter equipped with 90W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics
Ships to United States
