Cart 
Order Tracking
63" x 40" 1610 Laser Engraver and Cutter Machine, with Electric Lifting Table and 80W Laser
Item Code: LEM-LD-1600H
independent software (hereinafter referred to as LaserWork), which is more simple to use in the first stage of using laser cutting machines. With the following optional parts, the laser engraver can have more functions (Extra payment is needed): CO2 glass laser tube: 100W (1.6m) / 130W (1.6m
Ships to United States
Long Cel Flat Bottom Engraving Bits
Item Code: EC-JL
Applicational materials: Mezzo rilievo on rosewood and hardwood. Series Engraving Tools Introduction: Depending on market demand, we will provide you with a variety of cutters with different price and quality. Bellowing are five series of engraving tool. N, A, AA, AAA series are made from solid carbide(tungsten), and the other series is diamond cutters. 3A (AAA) Series • This series bits are the most advanced tool at present, which was put out on May, 1st, 2009. Its materials are the best ones comparing with previous materials. • Its abrasion resistance and break resistance are largely improved. • As for the process technique, AAA series is more professional, which is mainly applied for acrylic, plastic, MDF, hardwood, PC, ABS, PVC, aluminum, copper, stainless steel and so on. AA Series • Be made from ultra-micron tungsten steel. • It’s a kind of precise engraving tools with high quality. • Featuring hardness of 94 HRC and super resistance to bend, its resistance to rub and stability are superior to other solid carbide materials. • Because of the high cost of the materials, the longest SHK of this series is 6mm. With the patent polishing process; the cutting tools are very sharp. • Engraving tools are excellent in engraving aluminum, stainless steel, steel. • Mills are excellent in processing rate and quality among acrylic, MDF and aluminum. • AA series is the top engraving tools consequent to A series after great investment and three years’ design, development and improvement. Its quality is superior to European and American ones. A Series • Adopts K200 Micro grain solid carbide • A series is a kind of cutting tools targeted at low-cost high-quality, customers who have used these tools are all amazed by its high efficiency and high benefits. N Series • N series is a kind of popular engraving tools adopts K10 micro grain solid carbide. • Put out by our factory in the early days. With engraving measurement and outstanding sales achievements, its excellent quality and low price meet the engraving need of most customers. Diamond Series • Diamond engraving tools are designed and developed to cut aluminum, brass, steel, acrylic and marble. • It has great hardness, abrasive resistance and processing quality, which can not be substituted by solid carbide. • The price is competitive higher than other cutters.
Ships to United States
US Stock, 35" x 25" 9060 CNC Engraver CNC Router
Item Code: CNCR-LD-9065H-US
Customers in Other Countries Please Click Here to Order: https://www.sign-in-china.com/products/1137/35_quot_x_25_quot_900mm_x_600mm_ad_cnc_engraver_machines.html 35" x 25" 9060 CNC Engraver CNC Router Application: Wide range of applications make it possible to process any wooden
Ships to United States
25.6" x 35" (650mm x 900mm) High Precision AD CNC Engraver Machine
Item Code: CNCR-CP-6590
;Machine should be stable on all legs. Make sure there is enough room around the machine, especially around the gantry and the controller. 1. Machine Installation - Main parts installation Includes: Z axis parts installation, controller installation, spindle installation, connection of all cable, and tool
Ships to United States
RECI W6 / S6 130W-160W CO2 Sealed Laser Tube
Item Code: CS-LT-W6
The Laser Tube product is ordering production, need 3 to 5 days of stock up time. High power rate, fast - speed cutting and small size Origin: Asia and Pacific Area China Quality standard: International H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc. Model Rated Power Max Power length Φ Catalyze Life span Warranty W6 130W 160W 1650mm 80mm Yes 10,000h 10 months We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Output Power: Its output power can reach 155w. The production process of the tube is standardized, so the output power and output model are guaranteed. (For other laser tube manufacturers: can’t provide this product) Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) High performance cost ratio: High output power, high efficiency, and high performance cost ratio. High photoelectric conversion rate: The output power will decrease for less than 2w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’s temperature is 42℃) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors). Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.) Length: The length is only 1.65m. It reduces the volume of the machine and minimizes freight cost.(The length of other 150w tubes is 1.8m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W6 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting. • High power cutting High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service) High performance cost ratio: When you buy Reci W6 130W-160W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. Label Negative electrode container Output mirror Product number in metal terminal Tube Model Sample Laser spot with depth of 5mm Operating Instruction Installation Requirement Make sure to follow the operation instructions of model W6 as shown in the illustration. The dedicated power DY20 should be equipped. The positive pole is in high voltage (The ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. Operation conditions • Water cooling: Using purified water; 3 to 5 liter / minute; water temperature: 10℃ - 40℃. • The operating environment: temperature 2 - 40℃, humidity 10-60%. • The working current: test current is 29mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. Working Performance • Cutting function. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way. Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. Tubes operated in wrong way will not be guaranteed by Manufacturer. How to check the laser? The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube. We need to exclude other reason of the problem. Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water. Secondly, make sure the mirrors, lens and light rought are all good. Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser. In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Ships to United States
RECI W2 / S2 90W-100W CO2 Sealed Laser Tube
Item Code: CS-LT-W2
High power rate, fast - speed cutting and small size Origin: Asia and Pacific Area China Quality standard: International H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc. Model Rated Power Max Power length Φ Catalyze Life span Warranty W2 90W 100W 1200mm 80mm Yes 10,000h 10 months We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Output Power: W2 rated power 90w and Maximum Power 100w. The production process of the tube is standardized, so the output power and output model are guaranteed. Its cutting effect and cutting speed is the same as 90w laser tube of other brands. (The other laser tubes are handmade and its quality is different from one tube to another) Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors). Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.) Length: The length is only 1.2m. It reduces the volume of the machine and minimizes freight cost. (The length of other 80w tubes is 1.64m. 300mm must be projecting in the machine. That costs more for machine panel, package and transport) Reci W2 CO2 laser tube is suitable for laser marking, laser cutting and laser engraving which are the ideal choice of laser paper - cut, laser cloth cutting and marble marking. • Cutting function • Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving. Laser is used in more and more applications! Hollow - out Engraving, you need it! Garment cutting & tailoring, you need it! Leather cutting, you need it!Acrylic board cutting, you need it! DIE board cutting, you need it! Rubber sheet cutting, you need it! Bamboo engraving, you need it! The glass laser tube made in China (i.e. the laser tube) is same with the one imported in processing and applications, but there are big differences in appearance, structure, life span, performance and same to prices. However, for the same power, the imported laser is tens of times higher in comparison with the former. (There is as big differences with same life spans, the imported CO2 laser can be recharged for use while the laser tube made in China is generally disposable to be used one time only). So the Chinese laser is recognized and accepted by domestic & foreign customers since it is economical and practical with lower price. As long as the length parameter is applicable, you can use our tube to substitute! High photoelectric conversion rate: No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃) Very good engraving function: It can compare with 60w laser tubes of other manufacturer. The tube can engrave with 5mA working current when there is still no laser beam in the laser tube. (Other brands: No engraving function) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service) High performance cost ratio: When you buy Reci W2 90W-100W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. How to identify a good or bad laser tube? 1)Install the laser tube properly; 2)Prepare a piece of acrylic board; 3)Put the acrylic board on the light outlet of the laser tube for laser dot test; 4)If it can form a standard conical hole (it proofs the standard TEMOO Basement Membrane Mode was applied), it means the laser tube is qualified. Then you can use it without any worry; Having the TEMOO Basement Membrane Mode is the basic condition for identifying a good quality of laser tube. Only the laser tube possessing the TEMOO Basement Membrane Mode and enriched spectral lines is a first class laser tube. Operating Instruction Installation Requirement Make sure to follow the operation instructions of model W2 as shown in the illustration. The dedicated power DY10 should be equipped. The positive pole is in high voltage (the ignition voltage is 19kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. Operation conditions • Water cooling: Using purified water; 2 to 5 liter / minute; water temperature: 10℃ - 40℃. • The operating environment: temperature 2 - 40℃, humidity 10-60%. • The working current: test current is 29mA. Maximum working current is 29mA. The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way. Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. Tubes operated in wrong way will not be guaranteed by Manufacturer. How to check the laser? The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube. We need to exclude other reason of the problem. Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water. Secondly, make sure the mirrors, lens and light rought are all good. Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser. In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Ships to United States
RECI W8 / S8 150W-180W CO2 Sealed Laser Tube
Item Code: CS-LT-W8
The Laser Tube product is ordering production, need 3 to 5 days of stock up time. High power rate, fast - speed cutting and small size Origin: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes etc. Mark & model: W8, the product is featured as large power rate laser tube, good stability and fast cutting speed, which is suitable for the cutting of thin metal plate. Model Rated Power Max Power length Φ Catalyze Life span Warranty W8 150W 180W 1850mm 90mm Yes 10,000h 10 months We will send a new one freely if the tube is broken during transit. Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free. Output Power: Its output power can reach 180w. The production process of the tube is standardized, so the output power and output model are guaranteed. (For other laser tube manufacturers: can’t provide this product) Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months) High performance cost ratio: High output power, high efficiency, and high performance cost ratio. High photoelectric conversion rate: The output power will decrease for less than 3w when the cooling water’s temperature is 42°C. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’s temperature is 42°C) Appearance: The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors). Tube frame: This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.) Length: The length is only 1.85m. It reduces the volume of the machine and minimizes freight cost.(The length of other 180w tubes is 2m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.) Reci W8 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting. • High power cutting High photoelectric conversion rate: The output power will decrease for less than 3w when the cooling water’s temperature is 42°C. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42°C) Warranty: 10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service) High performance cost ratio: When you buy Reci W8 150W-180W Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service. Operating Instruction Installation Requirement 1. Make sure to follow the operation instructions of model W8 as shown in the illustration. The dedicated power DY20 should be equipped. The positive pole is in high voltage (The ignition voltage is 30kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. 2. Operation conditions • Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40°C. • The operating environment: temperature 2-40°C, humidity 10-60%. • The working current: Test current is 29mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter indicating current must be connected to the negative electrode of the laser tube. • When it is working under over-high current for long term, the negative pole will appear purple, and the life span will be reduced rapidly. • To protect dust from going into the insulation sheath, please wrap it with plastic film. 3. Working Performance • Cutting function. • Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving. 4. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideway with air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: It is forbidden to clean the mirror with acetone. The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped. Put the acryl 300mm far away from output mirror, when testing the laser spot. 5. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. 6. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40°C, and the requested humidity is 10-60%. Pack the laser as in the original way. Important notes: It is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider. 7. Tubes operated in wrong way will not be guaranteed by manufacturer. How to check the laser? The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube. We need to exclude other reason of the problem. Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water. Secondly, make sure the mirrors, lens and light rought are all good. Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser. In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Ships to United States
S&A 5200DH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz
Item Code: CW-5200DHTY
S&A 5200DH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local. CAUTIONS We are authorized as "S&A" brand
Ships to United States
S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
Item Code: CW-5200THTY
S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please
Ships to United States
S&A 5200DI Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz
Item Code: CW-5200DITY
S&A 5200DI Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please
Ships to United States
S&A 5200TI Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
Item Code: CW-5200TITY
S&A 5200TI Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please
Ships to United States
8" W x 12" H Table Top Roll Up Banner Stand (Stand Only)
Item Code: SIC-MINI-R-S-5
Frame Size: 9.4in x 3.1in x 12.8in (24cm x 8cm x 32.5cm) Package Size: 10.6in x 3.9in x 2.0in (27cm x 10cm x 5cm) G.W. / set: 0.7lb (0.3kg) Feature: This is a Table Top Roll Up Banner Stand. Includes: • Small base • 2-Piece pole • Sticky tape top bar • Carton box Description: The Table Top Retractable Banner Stand is straightforward and easy to use. Like full sized roll up banner stands, the banner retracts inside the base for storage when it's not in use.The reduced-size retractable option for tabletops is an attractive and highly-portable way to present vital information about your products. Application: Table top retractable banner stands are perfect for table top advertising for trade shows, lobbies and point-of-sale displays.
Ships to United States
US Stock, S&A 5200DH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz
Item Code: CW-5200DHTY-US
_chiller_ac_1p_110v_60hz_for_one_8kw_spindle _welding_equipment_one_130_150w_co2_glass_laser_tube_cooling_0_93hp.html S&A 5200DH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 110V 60Hz Note: Cooling water additive is forbidden by express company
Ships to United States
US Stock-S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC Spindle Water Cooling, AC 1P 220V 50Hz
Item Code: CW-5200THTY-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: S&A 5200TH Industrial Water Chiller for 130W CO2 Engraver or CNC
Ships to United States
60W CO2 Sealed Glass Laser Tube (1250mm Length, 65mm Diameter)
Item Code: CS-LT-KT125065-60
product, we will provide the step by step instruction for you. 4. Spare Parts Supports We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by
Ships to United States
80W CO2 Sealed Glass Laser Tube (1250mm Length, 80mm Diameter)
Item Code: CS-LT-KT125080-80
by step instruction for you. 4. Spare Parts Supports We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF
Ships to United States
Rotary Axis for CO2 Laser Engraver
Item Code: CS-LM-RA5030
Introduction: Our Standard Rotary Attachment is ideal for engraving cylinder items with your laser. From glasses, to mugs, to wine bottles, to flashlights, the Rotary Attachment can quickly and easily adjust to size for a wide variety of products. Available machine: LCM-AQ-S-M0503 and LCM-AQ-M0605 Packing Size: 520x260x220mm (20.08"x 6.24"x 7.41") Gross Weight: 20kg(44.09lb)
Ships to United States
