Cart 
Order Tracking
Ving Tools 30 Degree Mimaki Vinyl Cutter Compatible Blades, Imported German 3A Series 5pcs/pack
Item Code: RCCB-MIMAKI30-3A
between 30, 45 and 60 degree are showed as below: The above information is for reference only, will be affect by the difference brands of material suppliers, and the rough of the blades, please note. 3A(AAA) Series •This series bits are the most advanced tool at present
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM
Item Code: CS-ROLAND-BH565
Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM Features: • Brand new • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 11.5mm • Diameter(Blade): 2mm • Length(Clamp to down): 28mm • Overall Length: 56.5mm Note: • Do not extend the knife point too long, the extended length should be within 0.55 mm. • When cutting small letters, you can extend the knife point longer to avoid carved strokes being took away by blade holder on self-adhesive tape. • If there is something wrong with blade holder, try to drop some motor oil in the bearings, and then you can insert the blade and rotate to lubricate. If you still can not solve the problem, you may consider replacing a new knife holder. Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. • Dropping oil on the bearing inside the blade holder is a good way of maintenance.
Ships to United States
Ving Tools 30 Degree IOLINE Compatible Vinyl Cutter Blade, 5pcs/pack, OEM
Item Code: RCCB-IOLINE30-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; •Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.5 mm. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Ving Tools 30 Degree Summa Compatible Vinyl Cutter Blades, 5pcs/pack, OEM
Item Code: RCCB-SUMMA30-C
Feature: • Knifepoint is made from ultrafine grain size cemented carbide; • Higher wear resistance and good durability; • Higher hardness, greater strength, better abrasion resistance and durability; • 30°, 45°and 60°are in different color; • Through fine grinding and polishing, high precision and good quality, without any problem of peeling, blistering and rusting; • Domestic topmost hose configuration better protects knifepoint from damage. Specification: Cutting thickness: 0.25mm Diameter: 1.5mm(0.6") Length: 19mm(0.75") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91, 5HRA Rockwell Breaking strength: 4000-4200N/mm2 The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc. Package:
Ships to United States
Ving Tools 30 Degree Big Graphtec Vinyl Cutter Compatible Blades, 5pcs/pack OEM
Item Code: RCCB-GR30-BI
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide. • Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Used for: It can be used in clothing proof press and ordinary Graphtec plotter. Remarks: OEM Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Ving Tools 30 Degree Pcut Vinyl Plotter Cutter Blades, 5pcs/pack
Item Code: RCCB-PCUT30-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; • Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life; • Domestic topmost hose configuration better protects knifepoint from damage. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Safety Cutter Vinyl Cutting Tools Wrapping Paper Cutter for Vinyl Car Wrap Cutting
Item Code: CS-KF-01
Safety Cutter Vinyl Cutting Tools Wrapping Paper Cutter for Vinyl Car Wrap Cutting This is a mini slitting tool. Handy for cutting self-adhesive material. Features: This Safety Knife is made of strong, easy-grip, impact-resistant polystyrene and works on paper and thin sheet material. The
Ships to United States
Ving Tools Blade Holder for Summa Vinyl Cutter, 45.5mm Length, OEM
Item Code: CS-SUMMA-BH01
precision grinding, inner race is thicker than ordinary blade holder bearing, high wear resistance and not easy to make the blade concentric circles deviation or knife jumping and other adverse circumstances. Poor quality copper bearing, inner race is too thick, easy to wear, prevents the blade from working
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM
Item Code: CS-ROLAND-BH55
Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM Features: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • .High quality, extra long life Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm • Length(Clamp to down): 32mm • Overall Length: 55mm Note: • Do not extend the knife point too long, the extended length should be within 0.55 mm. • When cutting small letters, you can extend the knife point longer to avoid carved strokes being took away by blade holder on self-adhesive tape. • If there is something wrong with blade holder, try to drop some motor oil in the bearings, and then you can insert the blade and rotate to lubricate. If you still can not solve the problem, you may consider replacing a new knife holder. Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. • Dropping oil on the bearing inside the blade holder is a good way of maintenance.
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM
Item Code: CS-ROLAND-BH60
Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 14mm • Diameter(Blade): 2mm • Length(Clamp to down): 28mm • Overall Length: 60mm Note: • Do not extend the knife point too long, the extended length should be within 0.55 mm. • When cutting small letters, you can extend the knife point longer to avoid carved strokes being took away by blade holder on self-adhesive tape. • If there is something wrong with blade holder, try to drop some motor oil in the bearings, and then you can insert the blade and rotate to lubricate. If you still can not solve the problem, you may consider replacing a new knife holder. Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. • Dropping oil on the bearing inside the blade holder is a good way of maintenance.
Ships to United States
Ving Tools 45 Degree IOLINE Vinyl Cutter Blade for Vinyl Cutting, 5pcs/pack, OEM
Item Code: RCCB-IOLINE45-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; •Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.5 mm. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Ving Tools Blade Holder for IOLINE Vinyl Cutter, 43mm Length, OEM
Item Code: CS-IOLINE-BH-C
Blade Holder for IOLINE Vinyl Cutter, 43mm Length, OEM Fits all IOLINE vinyl cutting plotter. Description: • Brand New • Material: Aluminum • With a vertical screw adjustment and double bearing. • High quality, extra long life Specification: • Diameter(Clamp): 11.5mm • Diameter(Blade): 1.5mm • Length(Clamp to down): 28mm • Overall Length: 43mm Using Guide: • Vinyl cutter blade holder works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. • Dropping oil on the bearing inside the blade holder is a good way of maintenance.
Ships to United States
Ving Tools 60 Degree Ioline Vinyl Cutter Compatible Blades, 5pcs/pack, OEM
Item Code: RCCB-IOLINE60-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; •Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.5 mm. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 56mm Length, OEM
Item Code: CS-ROLAND-BH56
Blade Holder for Roland Vinyl Cutter, 56mm Length, OEM Features: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm • Length(Clamp to down): 32.5mm • Overall Length: 56mm Note: • Do not extend the knife point too long, the extended length should be within 0.55 mm. • When cutting small letters, you can extend the knife point longer to avoid carved strokes being took away by blade holder on self-adhesive tape. • If there is something wrong with blade holder, try to drop some motor oil in the bearings, and then you can insert the blade and rotate to lubricate. If you still can not solve the problem, you may consider replacing a new knife holder. Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. • Dropping oil on the bearing inside the blade holder is a good way of maintenance.
Ships to United States
Ving Tools 60 Degree Small Foison Vinyl Plotter Cutter Blades, AA Grade 5pcs/pack
Item Code: RCCB-ROLAND60-AA-FO
Description: Foison OEM blades are designed to replace your original blade for your Foison® vinyl cutter. The 60 degree blades are meant for cutting thick materials such as fashion flock. When your blade wears out, keep these replacement blades nearby so that you don t lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Foison® Blade Holder to keep blades in place and adjust depth for varying vinyls. The 60 degree blades are the best at cutting large letters and shapes great with reflective vinyl and magnet material. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 60 degree for cutting thick vinyl materials. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Roland® vinyl cutter & GCC cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500
Ships to United States
Ving Tools 60 Degree Roland Compatible Vinyl Cutter Blades, N Grade 5pcs/ pack
Item Code: RCCB-ROLAND60-N
Description: Roland OEM blades are designed to replace your original blade for your Roland® vinyl cutter. The 60 degree blades are meant for cutting thick materials such as fashion flock. When your blade wears out, keep these replacement blades nearby so that you don't lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Roland® Blade Holder to keep blades in place and adjust depth for varying vinyls. The 60 degree blades are the best at cutting large letters and shapes great with reflective vinyl and magnet material. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 60 degree for cutting thick vinyl materials. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. It can be used with Roland GX24, GX300, GX400, GX500, GX640, SP-540, SP-540I, SP-540V, SP-300, SP-300I, SP-300V, VP-300, VP-300I, VP-300V, VP-540, VP-540V, VP-540I vinyl cutters. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. • Material: Extra accuracy and high density tungsten cemented carbide • Blade size: 23mm±1mm • Diameter: 2mm • Knifepoint offset: 0.25mm and 450-1500
Ships to United States
Ving Tools 60 Degree ANNA Vinyl Cutter Compatible Blades, 5pcs/pack, OEM
Item Code: RCCB-ANNA60-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; • Higher hardness(HRA93), greater strength(4200N/mm2, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color;• Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Specification: Cutting thickness: 0.25mm Diameter: 2mm(0.8") Length: 23mm(0.91") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91,5HRA Rockwell Breaking strength: 4000-4200N/mm2 Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc.
Ships to United States
Qili QG-32 Big Triangle Scraper Car Body vinyl film wrapping Sticker Installation tools Handle Squeegee
Item Code: BS-QG-32
Specifications: Width: 13CM Total length: 28CM Material: Temperature POM Applications: Squeegees are ideal for eliminating bubbles and smoothing the surface on films, vinyl, graphics, stickers, wallpaper, etc. They can be used on car explosion-proof membrane and household adornment too.
Ships to United States
Window Film Tint Tools Mini Squeegee Scraper Car Home Professional For Auto
Item Code: BS-3000697
Window Film Tint Tools Mini Squeegee Scraper Car Home Professional For Auto Features: 100% brand new and high quality. Durable squeegee made from high quality stainless steel / rubber / plastic Scrape off the bubbles downright under the film, prevent glass car body and film Scratch-less, no
Ships to United States
Ving Tools 45 Degree Small Redsail Vinyl Plotter Cutter Blades, 3A Grade 5pcs/pack
Item Code: RCCB-ROLAND45-3A-RS
Description: Redsail OEM blades are designed to replace your original blade for your Redsail vinyl cutter. The 45 degree blades are meant for lighter vinyl or standard vinyl cutting. When your blade wears out, keep these replacement blades nearby so that you don t lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Redsail blade holder to keep blades in place and adjust depth for varying vinyls. The 45 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 45 degree for standard cutting. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Roland® vinyl cutter & GCC cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500 Note: From the technical level, using a 60 degree blade on everyday cutting is a waste, less of the blade s cutting area is used, and blade life is wasted. The more horizontal cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer. So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
Ships to United States
Ving Tools 60 Degree Small Redsail Vinyl Plotter Cutter Blades, AA Grade 5pcs/pack
Item Code: RCCB-ROLAND60-AA-RS
Description: Redsail OEM blades are designed to replace your original blade for your Redsail® vinyl cutter. The 60 degree blades are meant for cutting thick materials such as fashion flock. When your blade wears out, keep these replacement blades nearby so that you don t lose time during job production. These blades are meant for cutting heat transfer and sign vinyl materials. Pair this with our Redsail® Blade Holder to keep blades in place and adjust depth for varying vinyls. The 60 degree blades are the best at cutting large letters and shapes great with reflective vinyl and magnet material. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • Blades are 60 degree for cutting thick vinyl materials. • Use as replacement blades when original wears out. • Easy to install. • Cuts sign and heat transfer materials. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Roland® vinyl cutter & GCC cutters, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500
Ships to United States
Ving Tools 45 Degree ANNA Vinyl Cutter Compatible Blades, 5pcs/pack, OEM
Item Code: RCCB-ANNA45-C
Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide; • Higher hardness(HRA93), greater strength(4200N/mm2, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color;• Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. Specification: Cutting thickness: 0.25mm Diameter: 2mm(0.8") Length: 23mm(0.91") Available in 30, 45 and 60 degree, 0.25mm offset Material: 89-90%Wc/10-11%Co Rigidity: 91,5HRA Rockwell Breaking strength: 4000-4200N/mm2 Application: Commonly used in production of advertisements and light box, cutting 3M reflective film, diamond reflective film, vehicle wraps reflective film, mobile phones beauty paste, CAD diagram, and some material difficult to process, etc.
Ships to United States
Ving Tools 30 Degree Foison Vinyl Plotter Cutter Blades, AA Grade 5pcs/pack
Item Code: RCCB-ROLAND30-AA-FO
Description: The 30 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Roland, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500
Ships to United States
Ving Tools 30 Degree Foison Vinyl Cutter Blades, 3A Grade 5pcs/pack
Item Code: RCCB-ROLAND30-3A-FO
Description: The 30 degree blades are good general purpose blades that do a very good job cutting both large and small letters/shapes in vinyl. There are 5 pcs in 1 pack. • Made from cemented carbide, carbide is a very hard wearing metal which will last a long time for all your cutting needs. • Made by computer controlled CNC machines. • The speed of carving is extremely quick. • High quality and extra long life OEM blades. • Computer controlled CNC machines ensure precision and cutting accuracy. • The sharp blades are necessary ensuring the unbroken materials due to extremely quick carving speed. Compatible with the following cutters: Our CPM-LD, CPM-FS-C, CPM-CUTOK, CPM-RS Series vinyl cutters, Roland, Liyu, Redsail, Lidar, Jiachen and many more cutters on market. • Excellent for cutting vinyl, photo - stencil films & other thin films, etc. • Superior cutting of the most intricate designs. •Material: Extra accuracy and high density tungsten cemented carbide •Blade size: 23mm±1mm •Diameter: 2mm •Knifepoint offset: 0.25mm and 450-1500
Ships to United States
